[vz-users] Generelles Problem mit dem Siemens TD-3511 und dem Raspberry Pi
René Schmidt
renske96 at hotmail.de
Sun Jul 20 17:08:35 CEST 2014
Hallo Community,
ich habe ein Problem mit der Ersteinrichtung meines Pi's:
Ich habe mit Hterm den Stromzähler abgehört und ich bekomme folgende Ausgabe:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
/SAT63511C01251002666<\r><\n><2>F.F(00000000)<\r><\n>0.0.0(021204650)<\r><\n>0.0.1(G23-511-C.01/251-002666)<\r><\n>C.70.0()<\r><\n>1.128.0(0.000*kWh)<\r><\n>0.1.0(02)<\r><\n>0.1.2*02(14-07-01
00:00)<\r><\n>0.1.2&01(14-06-16
09:10)<\r><\n>0.1.2*00(00-00-00
00:00)<\r><\n>0.1.2*00(00-00-00
00:00)<\r><\n>0.1.2*00(00-00-00
00:00)<\r><\n>0.1.2*00(00-00-00
00:00)<\r><\n>0.1.2*00(00-00-00
00:00)<\r><\n>0.1.2*00(00-00-00
00:00)<\r><\n>0.1.2*00(00-00-00
00:00)<\r><\n>0.1.2*00(00-00-00
00:00)<\r><\n>0.1.2*00(00-00-00
00:00)<\r><\n>0.1.2*00(00-00-00
00:00)<\r><\n>0.1.2*00(00-00-00
00:00)<\r><\n>0.1.2*00(00-00-00
00:00)<\r><\n>0.1.2*00(00-00-00
00:00)<\r><\n>1.2.0(2.119*kW)<\r><\n>2.2.0(5.692*kW)<\r><\n>1.4.0(08
0.000*kW)<\r><\n>2.4.0(08
2.217*kW)<\r><\n>1.6.0(2.303*kW)(14-07-13
19:45)<\r><\n>1.6.0*02(1.904)(14-06-22
20:00)<\r><\n>1.6.0&01(0.215)(14-06-16
09:10)<\r><\n>1.6.0*00(0.000)(00-00-00
00:00)<\r><\n>1.6.0*00(0.000)(00-00-00
00:00)<\r><\n>1.6.0*00(0.000)(00-00-00
00:00)<\r><\n>1.6.0*00(0.000)(00-00-00
00:00)<\r><\n>1.6.0*00(0.000)(00-00-00
00:00)<\r><\n>1.6.0*00(0.000)(00-00-00
00:00)<\r><\n>1.6.0*00(0.000)(00-00-00
00:00)<\r><\n>1.6.0*00(0.000)(00-00-00
00:00)<\r><\n>1.6.0*00(0.000)(00-00-00
00:00)<\r><\n>1.6.0*00(0.000)(00-00-00
00:00)<\r><\n>1.6.0*00(0.000)(00-00-00
00:00)<\r><\n>1.6.0*00(0.000)(00-00-00
00:00)<\r><\n>1.6.0*00(0.000)(00-00-00
00:00)<\r><\n>2.6.0(5.711*kW)(14-07-16
11:15)<\r><\n>2.6.0*02(5.692)(14-06-19
15:00)<\r><\n>2.6.0&01(0.000)(05-01-01
00:00)<\r><\n>2.6.0*00(0.000)(00-00-00
00:00)<\r><\n>2.6.0*00(0.000)(00-00-00
00:00)<\r><\n>2.6.0*00(0.000)(00-00-00
00:00)<\r><\n>2.6.0*00(0.000)(00-00-00
00:00)<\r><\n>2.6.0*00(0.000)(00-00-00
00:00)<\r><\n>2.6.0*00(0.000)(00-00-00
00:00)<\r><\n>2.6.0*00(0.000)(00-00-00
00:00)<\r><\n>2.6.0*00(0.000)(00-00-00
00:00)<\r><\n>2.6.0*00(0.000)(00-00-00
00:00)<\r><\n>2.6.0*00(0.000)(00-00-00
00:00)<\r><\n>2.6.0*00(0.000)(00-00-00
00:00)<\r><\n>2.6.0*00(0.000)(00-00-00
00:00)<\r><\n>2.6.0*00(0.000)(00-00-00
00:00)<\r><\n>1.8.0(174.979*kWh)<\r><\n>1.8.0*02(77.580)<\r><\n>1.8.0&01(0.054)<\r><\n>1.8.0*00(0.000)<\r><\n>1.8.0*00(0.000)<\r><\n>1.8.0*00(0.000)<\r><\n>1.8.0*00(0.000)<\r><\n>1.8.0*00(0.000)<\r><\n>1.8.0*00(0.000)<\r><\n>1.8.0*00(0.000)<\r><\n>1.8.0*00(0.000)<\r><\n>1.8.0*00(0.000)<\r><\n>1.8.0*00(0.000)<\r><\n>1.8.0*00(0.000)<\r><\n>1.8.0*00(0.000)<\r><\n>1.8.0*00(0.000)<\r><\n>1.8.1(174.979*kWh)<\r><\n>1.8.1*02(77.580)<\r><\n>1.8.1&01(0.054)<\r><\n>1.8.1*00(0.000)<\r><\n>1.8.1*00(0.000)<\r><\n>1.8.1*00(0.000)<\r><\n>1.8.1*00(0.000)<\r><\n>1.8.1*00(0.000)<\r><\n>1.8.1*00(0.000)<\r><\n>1.8.1*00(0.000)<\r><\n>1.8.1*00(0.000)<\r><\n>1.8.1*00(0.000)<\r><\n>1.8.1*00(0.000)<\r><\n>1.8.1*00(0.000)<\r><\n>1.8.1*00(0.000)<\r><\n>1.8.1*00(0.000)<\r><\n>1.8.2(0.000*kWh)<\r><\n>1.8.2*02(0.000)<\r><\n>1.8.2&01(0.000)<\r><\n>1.8.2*00(0.000)<\r><\n>1.8.2*00(0.000)<\r><\n>1.8.2*00(0.000)<\r><\n>1.8.2*00(0.000)<\r><\n>1.8.2*00(0.000)<\r><\n>1.8.2*00(0.000)<\r><\n>1.8.2*00(0.000)<\r><\n>1.8.2*00(0.000)<\r><\n>1.8.2*00(0.000)<\r><\n>1.8.2*00(0.000)<\r><\n>1.8.2*00(0.000)<\r><\n>1.8.2*00(0.000)<\r><\n>1.8.2*00(0.000)<\r><\n>1.8.3(0.000*kWh)<\r><\n>1.8.3*02(0.000)<\r><\n>1.8.3&01(0.000)<\r><\n>1.8.3*00(0.000)<\r><\n>1.8.3*00(0.000)<\r><\n>1.8.3*00(0.000)<\r><\n>1.8.3*00(0.000)<\r><\n>1.8.3*00(0.000)<\r><\n>1.8.3*00(0.000)<\r><\n>1.8.3*00(0.000)<\r><\n>1.8.3*00(0.000)<\r><\n>1.8.3*00(0.000)<\r><\n>1.8.3*00(0.000)<\r><\n>1.8.3*00(0.000)<\r><\n>1.8.3*00(0.000)<\r><\n>1.8.3*00(0.000)<\r><\n>1.8.4(0.000*kWh)<\r><\n>1.8.4*02(0.000)<\r><\n>1.8.4&01(0.000)<\r><\n>1.8.4*00(0.000)<\r><\n>1.8.4*00(0.000)<\r><\n>1.8.4*00(0.000)<\r><\n>1.8.4*00(0.000)<\r><\n>1.8.4*00(0.000)<\r><\n>1.8.4*00(0.000)<\r><\n>1.8.4*00(0.000)<\r><\n>1.8.4*00(0.000)<\r><\n>1.8.4*00(0.000)<\r><\n>1.8.4*00(0.000)<\r><\n>1.8.4*00(0.000)<\r><\n>1.8.4*00(0.000)<\r><\n>1.8.4*00(0.000)<\r><\n>1.8.5(0.000*kWh)<\r><\n>1.8.5*02(0.000)<\r><\n>1.8.5&01(0.000)<\r><\n>1.8.5*00(0.000)<\r><\n>1.8.5*00(0.000)<\r><\n>1.8.5*00(0.000)<\r><\n>1.8.5*00(0.000)<\r><\n>1.8.5*00(0.000)<\r><\n>1.8.5*00(0.000)<\r><\n>1.8.5*00(0.000)<\r><\n>1.8.5*00(0.000)<\r><\n>1.8.5*00(0.000)<\r><\n>1.8.5*00(0.000)<\r><\n>1.8.5*00(0.000)<\r><\n>1.8.5*00(0.000)<\r><\n>1.8.5*00(0.000)<\r><\n>1.8.6(0.000*kWh)<\r><\n>1.8.6*02(0.000)<\r><\n>1.8.6&01(0.000)<\r><\n>1.8.6*00(0.000)<\r><\n>1.8.6*00(0.000)<\r><\n>1.8.6*00(0.000)<\r><\n>1.8.6*00(0.000)<\r><\n>1.8.6*00(0.000)<\r><\n>1.8.6*00(0.000)<\r><\n>1.8.6*00(0.000)<\r><\n>1.8.6*00(0.000)<\r><\n>1.8.6*00(0.000)<\r><\n>1.8.6*00(0.000)<\r><\n>1.8.6*00(0.000)<\r><\n>1.8.6*00(0.000)<\r><\n>1.8.6*00(0.000)<\r><\n>2.8.0(1047.293*kWh)<\r><\n>2.8.0*02(489.371)<\r><\n>2.8.0&01(0.000)<\r><\n>2.8.0*00(0.000)<\r><\n>2.8.0*00(0.000)<\r><\n>2.8.0*00(0.000)<\r><\n>2.8.0*00(0.000)<\r><\n>2.8.0*00(0.000)<\r><\n>2.8.0*00(0.000)<\r><\n>2.8.0*00(0.000)<\r><\n>2.8.0*00(0.000)<\r><\n>2.8.0*00(0.000)<\r><\n>2.8.0*00(0.000)<\r><\n>2.8.0*00(0.000)<\r><\n>2.8.0*00(0.000)<\r><\n>2.8.0*00(0.000)<\r><\n>2.8.1(1047.303*kWh)<\r><\n>2.8.1*02(489.371)<\r><\n>2.8.1&01(0.000)<\r><\n>2.8.1*00(0.000)<\r><\n>2.8.1*00(0.000)<\r><\n>2.8.1*00(0.000)<\r><\n>2.8.1*00(0.000)<\r><\n>2.8.1*00(0.000)<\r><\n>2.8.1*00(0.000)<\r><\n>2.8.1*00(0.000)<\r><\n>2.8.1*00(0.000)<\r><\n>2.8.1*00(0.000)<\r><\n>2.8.1*00(0.000)<\r><\n>2.8.1*00(0.000)<\r><\n>2.8.1*00(0.000)<\r><\n>2.8.1*00(0.000)<\r><\n>2.8.2(0.000*kWh)<\r><\n>2.8.2*02(0.000)<\r><\n>2.8.2&01(0.000)<\r><\n>2.8.2*00(0.000)<\r><\n>2.8.2*00(0.000)<\r><\n>2.8.2*00(0.000)<\r><\n>2.8.2*00(0.000)<\r><\n>2.8.2*00(0.000)<\r><\n>2.8.2*00(0. (...usw...)
Die fett markierten will ich auslesen:
1.8.1(174.979*kWh)
2.8.1(1047.303*kWh)
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
meine vzlogger.conf sieht folgendermaßen aus:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
/**
* vzlogger configuration
*
* use proper encoded JSON with javascript comments
*
* take a look at the wiki for detailed information:
* http://wiki.volkszaehler.org/software/controller/vzlogger#configuration
*/
{
"retry" : 30, /* how long to sleep between failed requests, in seconds */
"daemon": true, /* run periodically */
//"foreground" : true, /* dont run in background (prevents forking) */
"verbosity" : 500, /* between 0 and 15 */
"log" : "/var/log/vzlogger.log",/* path to logfile, optional */
"local" : {
// "enabled" : false, /* should we start the local HTTPd for serving live readings? */
"port" : 8080, /* the TCP port for the local HTTPd */
"index" : true, /* should we provide a index listing of available channels if no UUID was requested? */
"timeout" : 30, /* timeout for long polling comet requests, 0 disables comet, in seconds */
"buffer" : 600 /* how long to buffer readings for the local interface, in seconds */
},
"meters" : [
{
"protocol" : "d0",
"device" : "/dev/ttyUSB0",
"enabled" : true,
"interval" : 61,
"baudrate" : 115200,
"parity" : "7E1",
"pullseq" : "2F3F210D0A",
"max" : 40.0, /* has to be double! */
"min" : -5.0, /* has to be double! */
"channel" : {
"uuid" : "1df4aca0-0fff-11e4-bbf2-bdf25f107f24",
"middleware" : "http://localhost/middleware.php"
}
} // meter
,
//
{
"enabled" : false,
"protocol" : "file",
"path" : "/sys/class/thermal/thermal_zone0/temp",
// "format" : "$v", /* a format string for parsing complex logfiles */
/* arbitrary text and whitespaces are allowed, see 'scanf()' */
/* at least $v has to be used */
/* $i => identifier, $v => value, $t => timestamp */
"rewind" : true, /* reset file pointer each interval to the beginning of the file */
"interval" : 20, /* of ommitted, we will try to listen on changes with inotify */
"identifier" : "1-0:1.8.1*255",
"channel" : {
"uuid" : "1972bf30-0f80-11e4-b333-d76abce3aed8",
"middleware" : "http://localhost/middleware.php"
} // channel
} // meter
,
{
"enabled" : false,
"protocol" : "file",
"path" : "/proc/loadavg",
// "format" : "$i $v $t", /* a format string for parsing complex logfiles */
/* arbitrary text and whitespaces are allowed, see 'scanf()' */
/* at least $v has to be used */
/* $i => identifier, $v => value, $t => timestamp */
"rewind" : true, /* reset file pointer each interval to the beginning of the file */
"interval" : 10, /* of ommitted, we will try to listen on changes with inotify */
"aggtime" : 300, /* aggregate all signals and give one update to middleware every 'aggtime' seconds */
"aggfixedinterval" : true, /* round all timestamps to middleware to nearest aggtime */
"channel" : {
"uuid" : "1972bf30-0f80-11e4-b333-d76abce3aed8",
"middleware" : "http://localhost/middleware.php",
"aggmode" : "MAX" /* add all s0 intervals in the aggregation. Possible Modes: SUM, AVG, MAX and NONE */
} // channel
} // meter
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
wenn ich vzlogger in den Terminal eingebe erhalte ich folgendes:
root at raspberrypi:/home/pi# vzlogger
[Jul 20 14:19:00][mtr0] Creating new meter with protocol d0.
[Jul 20 14:19:00][d0] pullseq len:5 found
[Jul 20 14:19:00][mtr0] Meter configured. enabled
[Jul 20 14:19:00] New meter initialized (protocol=d0)
[Jul 20 14:19:00] Configure channel.
[Jul 20 14:19:00] Identifier is not set. Set it to default value 'NilItentifier'.
Segmentation fault
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Was muss ich noch ändern damit ich Daten erhalte? :D Wie mache ich die
Einstellungen, dass die Daten in eine schon existierende Datenbank im
Internet verknüfe?
Vielen Dank für die Hilfe!
Mit freundlichen Grüßen,
René Schmidt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://demo.volkszaehler.org/pipermail/volkszaehler-users/attachments/20140720/39d887ec/attachment-0001.html>
More information about the volkszaehler-users
mailing list