[vz-users] Itron 3000 Probleme mit vzlogger und Ausleseschwierigkeiten Ziffer 0

[Christopher Bott]

Hi Udo!

>> sudo stty -F /dev/ttyUSB0 300 parenb -parodd cs7 -cstopb
>> sudo stty -F /dev/ttyUSB1 300 parenb -parodd cs7 -cstopb
> nimm das mal aus der rc.local heraus. Danach reboot.
Ok, hab ich aus der rc.local rausgenommen und nen reboot gemacht.
Ändert nichts. Danach hab ich Parity 7E1 und Baudrate 300 mit in die 
vzlogger.config aufgenommen. Selbes Ergebnis. Auch der Eintrag 
"baudrate_read": 300 hilft nichts.
Eine Ackseq hat der Zähler nicht. Habe dennoch mal spasseshalber die 
erste Zeile die der Zähler ausspuckt als ack genommen und in Hex 
umgewandelt und in die Config eingetragen. Nach erfolglosem Hin- und Her 
hab ich es dann wieder auskommentiert.

     {
     "retry" : 60,                         /* how long to sleep between 
failed requests, in seconds */
     "daemon" : true,                  /* run periodically */
     "verbosity" : 9999,              /* between 0 and 15 */
     "log" : "/var/log/vzlogger.log", /* path to logfile, optional */

  "local" : {
             "enabled" : false,       /* should we start the local HTTPd 
for serving live readings? */
             "port" : 8080,            /* the TCP port for the local 
HTTPd */
             "index" : true,           /* should we provide a index 
listing of available channels if no UUID was requested? */
             "timeout" : 30,         /* timeout for long polling comet 
requests, 0 disables comet, in seconds */
             "buffer" : 600           /* how long to buffer readings for 
the local interface, in seconds */
     },

     "meters" : [{

     /* ACE3000 SMA Ertragszaehler */
             "enable" : true,
             "protocol" : "d0",
             "device" : "/dev/ttyUSB0",
             "parity": "7E1",
             "baudrate": 300,
             "pullseq" : "2F3F210D0A",
//            "baudrate_read": 300,
//            "ackseq": "2f4143455c336b323656312e3139",
             "channels" : [{
                     "uuid" : "443aab40-6991-11e4-8510-29439f328541",
                     "middleware" : "http://127.0.1.1/middleware.php",
                     "identifier" : "1.8.0" /* Ertrag PV */
                     }]
             }
     ]}

> Was steht dann in der vzlogger.log?
In der vzlogger.log steht folgendes :
[Nov 11 21:14:47]       Opened logfile /var/log/vzlogger.log
[Nov 11 21:14:47][]     ===> Start meters.
[Nov 11 21:14:47][mtr0] Meter for protocol 'd0' is disabled. Skipping.
[Nov 11 21:14:47][]     Startup done.
[Nov 11 21:18:58]       Opened logfile /var/log/vzlogger.log
[Nov 11 21:18:58][]     ===> Start meters.
[Nov 11 21:18:58][mtr0] Meter for protocol 'd0' is disabled. Skipping.
[Nov 11 21:18:58][]     Startup done.
[Nov 11 21:26:16]       Opened logfile /var/log/vzlogger.log
[Nov 11 21:26:16][]     ===> Start meters.
[Nov 11 21:26:16][mtr0] Meter for protocol 'd0' is disabled. Skipping.
[Nov 11 21:26:16][]     Startup done.
[Nov 11 21:36:40]       Opened logfile /var/log/vzlogger.log
[Nov 11 21:36:40][]     ===> Start meters.
[Nov 11 21:36:40][mtr0] Meter for protocol 'd0' is disabled. Skipping.
[Nov 11 21:36:40][]     Startup done.
[Nov 11 22:53:14]       terminating on signal 15.
[Nov 11 22:53:14]       Closing connections to terminate
[Nov 11 22:53:37]       Opened logfile /var/log/vzlogger.log
[Nov 11 22:53:37][]     ===> Start meters.
[Nov 11 22:53:37][mtr0] Meter for protocol 'd0' is disabled. Skipping.
[Nov 11 22:53:37][]     Startup done.
[Nov 11 22:56:35]       terminating on signal 15.
[Nov 11 22:56:35]       Closing connections to terminate
[Nov 11 22:56:50]       Opened logfile /var/log/vzlogger.log
[Nov 11 22:56:50][]     ===> Start meters.
[Nov 11 22:56:50][mtr0] Meter for protocol 'd0' is disabled. Skipping.
[Nov 11 22:56:50][]     Startup done.
[Nov 11 23:13:15]       terminating on signal 15.
[Nov 11 23:13:15]       Closing connections to terminate
[Nov 11 23:13:34]       Opened logfile /var/log/vzlogger.log
[Nov 11 23:13:34][]     ===> Start meters.
[Nov 11 23:13:34][mtr0] Meter for protocol 'd0' is disabled. Skipping.
[Nov 11 23:13:34][]     Startup done.