[vz-users] vzlogger 0.4.4 läuft, liefert aber keine Daten an die middleware
Bernd Gewehr
Bernd at gewehr.net
Sun Aug 2 16:55:29 CEST 2015
OK, die rc.local ist clean!
hier die vzlogger.conf
cat /etc/vzlogger.conf
/**
* vzlogger configuration
*
* use proper encoded JSON with javascript comments
*
* take a look at the wiki for detailed information:
* http://wiki.volkszaehler.org/software/controller/vzlogger#configuration
*/
{
"retry": 30,
"daemon": true,
"verbosity": 15,
"log": "/var/log/vzlogger.log",
"push": [
{
"url": ""
}
],
"local": {
"enabled": false,
"port": 8080,
"index": false,
"timeout": 0,
"buffer": 0
},
"meters": [
{
"enabled": true,
"allowskip": false,
"interval": -1,
"aggtime": -1,
"aggfixedinterval": false,
"channels": [
{
"uuid": "ebb9c9b0-7058-11e2-b5ed-d12ec87a3a7f",
"identifier": "1-0:1.8.1",
"api": "volkszaehler",
"middleware": "http://localhost/middleware.php",
"secretKey": "",
"type": "device",
"scaler": 1,
"aggmode": "none",
"duplicates": 0
},
{
"uuid": "635481a0-6fcd-11e2-8587-eda25228f8bf",
"identifier": "1-0:1.7.1*",
"api": "volkszaehler",
"middleware": "http://localhost/middleware.php",
"secretKey": "",
"type": "device",
"scaler": 1,
"aggmode": "none",
"duplicates": 0
}
],
"protocol": "sml",
"host": "",
"device": "/dev/ttyAMA0",
"pullseq": "",
"baudrate": 9600,
"parity": "8n1"
},
{
"enabled": true,
"allowskip": false,
"interval": -1,
"aggtime": -1,
"aggfixedinterval": false,
"channels": [
{
"uuid": "8102dbc0-6fcd-11e2-a8b7-a1307aa80770",
"identifier": "",
"api": "volkszaehler",
"middleware": "http://localhost/middleware.php",
"secretKey": "",
"type": "device",
"scaler": 1,
"aggmode": "none",
"duplicates": 0
}
],
"protocol": "s0",
"device": "",
"gpio": 17,
"mmap": "",
"gpio_dir": -1,
"configureGPIO": true,
"sendzero": true,
"resolution": 1000,
"debounce_delay": 10000,
"nonblocking_delay": 100000
},
{
"enabled": true,
"allowskip": false,
"interval": -1,
"aggtime": -1,
"aggfixedinterval": false,
"channels": [
{
"uuid": "89a19f80-6fcd-11e2-be46-d7713e888ef4",
"identifier": "",
"api": "volkszaehler",
"middleware": "http://localhost/middleware.php",
"secretKey": "",
"type": "device",
"scaler": 1,
"aggmode": "none",
"duplicates": 0
}
],
"protocol": "s0",
"device": "",
"gpio": 18,
"mmap": "",
"gpio_dir": -1,
"configureGPIO": true,
"sendzero": true,
"resolution": 100,
"debounce_delay": 30,
"nonblocking_delay": 100000
},
{
"enabled": true,
"allowskip": false,
"interval": -1,
"aggtime": -1,
"aggfixedinterval": false,
"channels": [
{
"uuid": "fc73fdb0-831f-11e2-ab63-050a66acca61",
"identifier": "*28-000004858252",
"api": "volkszaehler",
"middleware": "http://localhost/middleware.php",
"secretKey": "",
"type": "device",
"scaler": 1,
"aggmode": "none",
"duplicates": 0
},
{
"uuid": "3a513760-89c9-11e2-8948-81bd1f67b0d0",
"identifier": "*28-000004854a62",
"api": "volkszaehler",
"middleware": "http://localhost/middleware.php",
"secretKey": "",
"type": "device",
"scaler": 1,
"aggmode": "none",
"duplicates": 0
},
{
"uuid": "27fd1e00-89c9-11e2-bc92-c922d3bff0dc",
"identifier": "*28-0000048553f3",
"api": "volkszaehler",
"middleware": "http://localhost/middleware.php",
"secretKey": "",
"type": "device",
"scaler": 1,
"aggmode": "none",
"duplicates": 0
},
{
"uuid": "3c391a00-8a11-11e2-92ec-0d9f1daff99d",
"identifier": "*28-00000484d527",
"api": "volkszaehler",
"middleware": "http://localhost/middleware.php",
"secretKey": "",
"type": "device",
"scaler": 1,
"aggmode": "none",
"duplicates": 0
},
{
"uuid": "2dd2cb00-8a11-11e2-b8a9-214e007465a4",
"identifier": "*28-000004851d7e",
"api": "volkszaehler",
"middleware": "http://localhost/middleware.php",
"secretKey": "",
"type": "device",
"scaler": 1,
"aggmode": "none",
"duplicates": 0
},
{
"uuid": "16a5a410-8a11-11e2-bfb5-55e9d027a1f8",
"identifier": "*28-00000484c3e1",
"api": "volkszaehler",
"middleware": "http://localhost/middleware.php",
"secretKey": "",
"type": "device",
"scaler": 1,
"aggmode": "none",
"duplicates": 0
},
{
"uuid": "1e6e25a0-8a11-11e2-96be-cd4b755a40c6",
"identifier": "*28-000004857e63",
"api": "volkszaehler",
"middleware": "http://localhost/middleware.php",
"secretKey": "",
"type": "device",
"scaler": 1,
"aggmode": "none",
"duplicates": 0
},
{
"uuid": "2414a2e0-8a11-11e2-8319-eb6370d8f760",
"identifier": "*28-000004856747",
"api": "volkszaehler",
"middleware": "http://localhost/middleware.php",
"secretKey": "",
"type": "device",
"scaler": 1,
"aggmode": "none",
"duplicates": 0
}
],
"protocol": "w1therm"
}
]
}
Die Ausgabe in die Konsole:
pi at volkszaehler ~ $ sudo service vzlogger restart
[....] Restarting smartmetering server: vzlogger[Aug 02 16:52:46][main]
vzlogger v0.4.4 based on heads/master-0-gccbc8f6625 from Thu, 30 Jul 2015
20:56:52 +0200 started.
[Aug 02 16:52:46][mtr0] Creating new meter with protocol sml.
[Aug 02 16:52:46][sml] pullseq len:0 found
[Aug 02 16:52:46][mtr0] Meter configured, enabled.
[Aug 02 16:52:46] New meter initialized (protocol=sml)
[Aug 02 16:52:46] Configure channel.
[Aug 02 16:52:46][chn0] New channel initialized (uuid=...7a3a7f
api=volkszaehler id=1-0:1.8.1)
[Aug 02 16:52:46] Configure channel.
[Aug 02 16:52:46][chn1] New channel initialized (uuid=...28f8bf
api=volkszaehler id=1-0:1.7.1*)
[Aug 02 16:52:46][mtr1] Creating new meter with protocol s0.
[Aug 02 16:52:46][s0] unknown option for mmap (). Falling back to normal
gpio.
[Aug 02 16:52:46][mtr1] Meter configured, enabled.
[Aug 02 16:52:46] New meter initialized (protocol=s0)
[Aug 02 16:52:46] Configure channel.
[Aug 02 16:52:46][chn2] New channel initialized (uuid=...a80770
api=volkszaehler id=)
[Aug 02 16:52:46][mtr2] Creating new meter with protocol s0.
[Aug 02 16:52:46][s0] unknown option for mmap (). Falling back to normal
gpio.
[Aug 02 16:52:46][mtr2] Meter configured, enabled.
[Aug 02 16:52:46] New meter initialized (protocol=s0)
[Aug 02 16:52:46] Configure channel.
[Aug 02 16:52:46][chn3] New channel initialized (uuid=...888ef4
api=volkszaehler id=)
[Aug 02 16:52:46][mtr3] Creating new meter with protocol w1therm.
[Aug 02 16:52:46][mtr3] Meter configured, enabled.
[Aug 02 16:52:46] New meter initialized (protocol=w1therm)
[Aug 02 16:52:46] Configure channel.
[Aug 02 16:52:46][chn4] New channel initialized (uuid=...acca61
api=volkszaehler id=*28-000004858252)
[Aug 02 16:52:46] Configure channel.
[Aug 02 16:52:46][chn5] New channel initialized (uuid=...67b0d0
api=volkszaehler id=*28-000004854a62)
[Aug 02 16:52:46] Configure channel.
[Aug 02 16:52:46][chn6] New channel initialized (uuid=...bff0dc
api=volkszaehler id=*28-0000048553f3)
[Aug 02 16:52:46] Configure channel.
[Aug 02 16:52:46][chn7] New channel initialized (uuid=...aff99d
api=volkszaehler id=*28-00000484d527)
[Aug 02 16:52:46] Configure channel.
[Aug 02 16:52:46][chn8] New channel initialized (uuid=...7465a4
api=volkszaehler id=*28-000004851d7e)
[Aug 02 16:52:46] Configure channel.
[Aug 02 16:52:46][chn9] New channel initialized (uuid=...27a1f8
api=volkszaehler id=*28-00000484c3e1)
[Aug 02 16:52:46] Configure channel.
[Aug 02 16:52:46][chn10]New channel initialized (uuid=...5a40c6
api=volkszaehler id=*28-000004857e63)
[Aug 02 16:52:46] Configure channel.
[Aug 02 16:52:46][chn11]New channel initialized (uuid=...d8f760
api=volkszaehler id=*28-000004856747)
[Aug 02 16:52:46] Have 4 meters.
[Aug 02 16:52:46][main] log level is 15
[Aug 02 16:52:46][main] daemon=1, local=0
[Aug 02 16:52:46] Daemonize process...
. ok
und der log beim Start des daemons:
[Aug 02 16:52:46] Opened logfile /var/log/vzlogger.log
[Aug 02 16:52:46][push] pushdata_thread created.
[Aug 02 16:52:46][] ===> Start meters
[Aug 02 16:52:46][mtr0] Meter connection established
[Aug 02 16:52:46][mtr0] Meter thread started
[Aug 02 16:52:46][mtr0] Meter is opened. Starting channels.
[Aug 02 16:52:46][chn0] Logging thread started
[Aug 02 16:52:46][chn1] Logging thread started
[Aug 02 16:52:46][push] Start push_data_thread
[Aug 02 16:52:46][chn0] Start logging thread for volkszaehler-api. Running
as daemon: yes
[Aug 02 16:52:46][chn0] Using default volkszaehler api.
[Aug 02 16:52:46][mtr0] Number of readers: 32
[Aug 02 16:52:46][mtr0] Config.daemon: 1
[Aug 02 16:52:46][mtr0] Config.local: 0
[Aug 02 16:52:46][chn1] Start logging thread for volkszaehler-api. Running
as daemon: yes
[Aug 02 16:52:46][chn1] Using default volkszaehler api.
[Aug 02 16:52:46][s0] counter_thread created
[Aug 02 16:52:46][mtr1] Meter connection established
[Aug 02 16:52:46][mtr1] Meter thread started
[Aug 02 16:52:46][mtr1] Meter is opened. Starting channels.
[Aug 02 16:52:46][chn2] Logging thread started
[Aug 02 16:52:46][s0] counter_thread created
[Aug 02 16:52:46][mtr2] Meter connection established
[Aug 02 16:52:46][mtr2] Meter thread started
[Aug 02 16:52:46][mtr2] Meter is opened. Starting channels.
[Aug 02 16:52:46][chn3] Logging thread started
[Aug 02 16:52:46][w1t] scanW1devices failed!
[Aug 02 16:52:46][mtr3] Cannot open meter
[Aug 02 16:52:46][] Startup failed: Meter open failed.
Mit den besten Grüßen
Bernd Gewehr
Burgstr. 45F
45289 Essen
02014784606
015209328236
-----Ursprüngliche Nachricht-----
From: Udo1
Sent: Sunday, August 02, 2015 4:46 PM
To: volkszaehler-users at demo.volkszaehler.org
Subject: Re: [vz-users] vzlogger 0.4.4 läuft, liefert aber keine Daten an
die middleware
Am 02.08.2015 um 16:15 schrieb Bernd Gewehr:
> Siehe hier:
> https://github.com/volkszaehler/vzlogger/issues/191
Die Einträge in der rc.local brauchst du nicht mehr.
> |echo 17 > /sys/class/gpio/export && echo "rising" >
> /sys/class/gpio/gpio17/edge echo 18 > /sys/class/gpio/export && echo
> "rising" > /sys/class/gpio/gpio18/edge|
Gruß
Udo
More information about the volkszaehler-users
mailing list