[vz-users] Easymeter vzlogger-conf
Jan Goe
jan.andrea7 at googlemail.com
Mon Jan 26 12:28:55 CET 2015
sehr schön vielen dank,
in meinen fall wenn ich z.b. alle 5 bzw 10 minuten werte vom zähler loggen
will wäre meine config dann so richtig :
-------
"retry" : 30, /* how long to sleep between failed
requests, in seconds */
"daemon": true, /* run periodically */
"foreground" : true, /* dont run in background (prevents
forking) */
"verbosity" : 15, /* between 0 and 15 */
"log" : "/var/www/vzlogger.log",/* path to logfile, optional */
"local" : {
"enabled" : false, /* should we start the local HTTPd for
serving live readings? */
"port" : 80, /* the TCP port for the local HTTPd */
"index" : true, /* should we provide a index listing of
available channels? */
"timeout" : 30, /* timeout for long polling comet requests,
0 disables comet, in seconds */
"buffer" : 600 /* how long to buffer readings for the
local interface, in seconds */
},
"meters" : [{
"enabled" : true, /* disabled meters will be ignored */
"protocol" : "sml", /* use 'vzlogger -h' for list of available
protocols */
"device" : "/dev/usb-ir-lesekopf0",
"aggtime": 300,
"channels": [{
"uuid" : "11c04d20-a31e-11e4-8745-d1d65d1da157",
"middleware" : "
http://127.0.0.1/volkszaehler.org/htdocs/middleware.php",
"identifier" : "1-0:1.8.0",
"aggmode": "MAX",
}]
},{
"enabled" : true, /* disabled meters will be ignored */
"protocol" : "sml", /* use 'vzlogger -h' for list of available
protocols */
"device" : "/dev/usb-ir-lesekopf1",
"aggtime": 300,
"channels": [{
"uuid" : "f9d00040-a47e-11e4-8bb8-edea5119d3cf",
"middleware" : "
http://127.0.0.1/volkszaehler.org/htdocs/middleware.php",
"identifier" : "1-0:1.8.0",
"aggmode": "MAX",
}]
},
]}
-------
wo wäre de identifier unterschied zwischen 1-0:1.8.0 und 8.1 ?
mfg
jan
2015-01-26 12:12 GMT+01:00 Matthias Behr <mbehr at mcbehr.de>:
> Ah. Klar. Du hast keine Pullseq gesetzt, d.h. deine Meter schicken ihre
> Daten von alleine.
> Da du aber ein Interval von 10min gesetzt hast, laufen die Daten alle in
> den Puffer. Dort holst du alle 10min ein Telegram ab.
> Stell mal das Interval auf 1 (oder 0). Falls du nicht so viele Daten
> willst, wie die Logger schicken, musst du mittels „aggtime“ und „aggmode“
> die Anzahl reduzieren.
>
> Am 26.01.2015 um 19:46 schrieb Jan Goe <jan.andrea7 at googlemail.com>:
>
> Na klar, das problem ist die Sprünge finden immer nur statt wenn ich
> vzlogger neu starte, um so länger vzlogger läuft um so größer wir die
> abweichung zum zähler ein neu start von vzlogger behebt diese abweichung
> dann meistens.
>
> hier ein auzzug, wo man den sprung und den neu start gut erkennen kann :
>
> -----
>
> [Jan 26 08:45:19][chn1] compare: 1422261319015 1422261919024 1422261919024.211914
> [Jan 26 08:45:19][chn1] JSON request body: [ [ 1422261919024.211914, 680616.500000 ] ]
> [Jan 26 08:45:19][chn1] CURL: Connection #0 seems to be dead!
> [Jan 26 08:45:19][chn1] CURL: Closing connection #0
> [Jan 26 08:45:19][chn1] CURL: About to connect() to 127.0.0.1 port 80 (#0)
> [Jan 26 08:45:19][chn1] CURL: Trying 127.0.0.1...
> [Jan 26 08:45:19][chn1] CURL: connected
> [Jan 26 08:45:19][chn1] CURL: Connected to 127.0.0.1 (127.0.0.1) port 80 (#0)
> [Jan 26 08:45:19][chn1] Buffer dump (size=0 keep=32): {}
> [Jan 26 08:45:19][mtr1] Next reading in 600 seconds
> [Jan 26 08:45:19][chn1] CURL: Sent 43 bytes..
> [Jan 26 08:45:19][chn1] CURL: Sent '[ [ 1422261919024.211914, 680616.500000 ] ]' bytes
> [Jan 26 08:45:19][chn1] CURL: upload completely sent off: 43 out of 43 bytes
> [Jan 26 08:45:19][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
> [Jan 26 08:45:19][chn0] CURL: HTTP 1.1 or later with persistent connection, pipelining supported
> [Jan 26 08:45:19][chn0] CURL: Received 26 bytes
> [Jan 26 08:45:19][chn0] CURL: Received '{"version":"0.3","rows":1}' bytes
> [Jan 26 08:45:19][chn0] CURL: Connection #0 to host 127.0.0.1 left intact
> [Jan 26 08:45:19][chn0] CURL Request succeeded with code: 200
> [Jan 26 08:45:20][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
> [Jan 26 08:45:21][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
> [Jan 26 08:45:21][chn1] CURL: HTTP 1.1 or later with persistent connection, pipelining supported
> [Jan 26 08:45:21][chn1] CURL: Received 26 bytes
> [Jan 26 08:45:21][chn1] CURL: Received '{"version":"0.3","rows":1}' bytes
> [Jan 26 08:45:21][chn1] CURL: Connection #0 to host 127.0.0.1 left intact
> [Jan 26 08:45:21][chn1] CURL Request succeeded with code: 200
> [Jan 26 08:55:16][mtr0] Got 7 new readings from meter:
> [Jan 26 08:55:16][mtr0] Reading: id=1-0:1.8.0*255/ObisItentifier:1-0:1.8.0*255 value=796475.80 ts=1422262516.184
> [Jan 26 08:55:16][mtr0] Reading: id=1-0:1.8.1*255/ObisItentifier:1-0:1.8.1*255 value=796475.80 ts=1422262516.184
> [Jan 26 08:55:16][mtr0] Reading: id=1-0:1.8.2*255/ObisItentifier:1-0:1.8.2*255 value=0.00 ts=1422262516.184
> [Jan 26 08:55:16][mtr0] Reading: id=1-0:16.7.0*255/ObisItentifier:1-0:16.7.0*255 value=491.00 ts=1422262516.184
> [Jan 26 08:55:16][mtr0] Reading: id=1-0:36.7.0*255/ObisItentifier:1-0:36.7.0*255 value=282.00 ts=1422262516.184
> [Jan 26 08:55:16][mtr0] Reading: id=1-0:56.7.0*255/ObisItentifier:1-0:56.7.0*255 value=51.00 ts=1422262516.185
> [Jan 26 08:55:16][mtr0] Reading: id=1-0:76.7.0*255/ObisItentifier:1-0:76.7.0*255 value=156.00 ts=1422262516.185
> [Jan 26 08:55:16][chn0] Adding reading to queue (value=796475.80 ts=1422262516.184)
> [Jan 26 08:55:16][chn0] ==> number of tuples: 1
> [Jan 26 08:55:16][chn0] compare: 1422261916165 1422262516184 1422262516184.354980
> [Jan 26 08:55:16][chn0] JSON request body: [ [ 1422262516184.354980, 796475.800000 ] ]
> [Jan 26 08:55:16][chn0] CURL: Connection #0 seems to be dead!
> [Jan 26 08:55:16][chn0] CURL: Closing connection #0
> [Jan 26 08:55:16][chn0] CURL: About to connect() to 127.0.0.1 port 80 (#0)
> [Jan 26 08:55:16][chn0] CURL: Trying 127.0.0.1...
> [Jan 26 08:55:16][chn0] Buffer dump (size=0 keep=32): {}
> [Jan 26 08:55:16][mtr0] Next reading in 600 seconds
> [Jan 26 08:55:16][chn0] CURL: connected
> [Jan 26 08:55:16][chn0] CURL: Connected to 127.0.0.1 (127.0.0.1) port 80 (#0)
> [Jan 26 08:55:16][chn0] CURL: Sent 43 bytes..
> [Jan 26 08:55:16][chn0] CURL: Sent '[ [ 1422262516184.354980, 796475.800000 ] ]' bytes
> [Jan 26 08:55:16][chn0] CURL: upload completely sent off: 43 out of 43 bytes
> [Jan 26 08:55:16][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
> [Jan 26 08:55:17][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
> [Jan 26 08:55:18][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
> [Jan 26 08:55:18][chn0] CURL: HTTP 1.1 or later with persistent connection, pipelining supported
> [Jan 26 08:55:18][chn0] CURL: Received 26 bytes
> [Jan 26 08:55:18][chn0] CURL: Received '{"version":"0.3","rows":1}' bytes
> [Jan 26 08:55:18][chn0] CURL: Connection #0 to host 127.0.0.1 left intact
> [Jan 26 08:55:18][chn0] CURL Request succeeded with code: 200
> [Jan 26 08:55:19][mtr1] Got 7 new readings from meter:
> [Jan 26 08:55:19][mtr1] Reading: id=1-0:1.8.0*255/ObisItentifier:1-0:1.8.0*255 value=680616.50 ts=1422262519.044
> [Jan 26 08:55:19][mtr1] Reading: id=1-0:1.8.1*255/ObisItentifier:1-0:1.8.1*255 value=680616.50 ts=1422262519.044
> [Jan 26 08:55:19][mtr1] Reading: id=1-0:1.8.2*255/ObisItentifier:1-0:1.8.2*255 value=0.00 ts=1422262519.044
> [Jan 26 08:55:19][mtr1] Reading: id=1-0:16.7.0*255/ObisItentifier:1-0:16.7.0*255 value=14.00 ts=1422262519.044
> [Jan 26 08:55:19][mtr1] Reading: id=1-0:36.7.0*255/ObisItentifier:1-0:36.7.0*255 value=-2.00 ts=1422262519.044
> [Jan 26 08:55:19][mtr1] Reading: id=1-0:56.7.0*255/ObisItentifier:1-0:56.7.0*255 value=0.00 ts=1422262519.044
> [Jan 26 08:55:19][mtr1] Reading: id=1-0:76.7.0*255/ObisItentifier:1-0:76.7.0*255 value=14.00 ts=1422262519.044
> [Jan 26 08:55:19][chn1] Adding reading to queue (value=680616.50 ts=1422262519.044)
> [Jan 26 08:55:19][chn1] ==> number of tuples: 1
> [Jan 26 08:55:19][chn1] compare: 1422261919024 1422262519044 1422262519044.300049
> [Jan 26 08:55:19][chn1] JSON request body: [ [ 1422262519044.300049, 680616.500000 ] ]
> [Jan 26 08:55:19][chn1] CURL: Connection #0 seems to be dead!
> [Jan 26 08:55:19][chn1] CURL: Closing connection #0
> [Jan 26 08:55:19][chn1] CURL: About to connect() to 127.0.0.1 port 80 (#0)
> [Jan 26 08:55:19][chn1] CURL: Trying 127.0.0.1...
> [Jan 26 08:55:19][chn1] CURL: connected
> [Jan 26 08:55:19][chn1] CURL: Connected to 127.0.0.1 (127.0.0.1) port 80 (#0)
> [Jan 26 08:55:19][chn1] Buffer dump (size=0 keep=32): {}
> [Jan 26 08:55:19][mtr1] Next reading in 600 seconds
> [Jan 26 08:55:19][chn1] CURL: Sent 43 bytes..
> [Jan 26 08:55:19][chn1] CURL: Sent '[ [ 1422262519044.300049, 680616.500000 ] ]' bytes
> [Jan 26 08:55:19][chn1] CURL: upload completely sent off: 43 out of 43 bytes
> [Jan 26 08:55:19][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
> [Jan 26 08:55:20][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
> [Jan 26 08:55:21][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
> [Jan 26 08:55:21][chn1] CURL: HTTP 1.1 or later with persistent connection, pipelining supported
> [Jan 26 08:55:21][chn1] CURL: Received 26 bytes
> [Jan 26 08:55:21][chn1] CURL: Received '{"version":"0.3","rows":1}' bytes
> [Jan 26 08:55:21][chn1] CURL: Connection #0 to host 127.0.0.1 left intact
> [Jan 26 08:55:21][chn1] CURL Request succeeded with code: 200
> [Jan 26 09:03:51] terminating on signal 15.
> [Jan 26 09:03:51] Closing connections to terminate
> [Jan 26 09:04:20] Opened logfile /var/log/vzlogger.log
> [Jan 26 09:04:20][] ===> Start meters
> [Jan 26 09:04:20][mtr0] Meter connection established
> [Jan 26 09:04:20][mtr0] Meter thread started
> [Jan 26 09:04:20][mtr0] Meter is opened. Starting channels.
> [Jan 26 09:04:20][chn0] Logging thread started
> [Jan 26 09:04:20][chn0] Start logging thread for volkszaehler-api. Running as daemon: yes
> [Jan 26 09:04:20][mtr0] Number of readers: 32
> [Jan 26 09:04:20][mtr1] Meter connection established
> [Jan 26 09:04:20][mtr0] Config.daemon: 1
> [Jan 26 09:04:20][mtr0] Config.local: 0
> [Jan 26 09:04:20][mtr1] Meter thread started
> [Jan 26 09:04:20][mtr1] Meter is opened. Starting channels.
> [Jan 26 09:04:20][chn1] Logging thread started
> [Jan 26 09:04:20][] Startup done.
> [Jan 26 09:04:20][chn0] Using default volkszaehler api.
> [Jan 26 09:04:20][chn1] Start logging thread for volkszaehler-api. Running as daemon: yes
> [Jan 26 09:04:20][chn1] Using default volkszaehler api.
> [Jan 26 09:04:20][mtr1] Number of readers: 32
> [Jan 26 09:04:20][mtr1] Config.daemon: 1
> [Jan 26 09:04:20][mtr1] Config.local: 0
> [Jan 26 09:04:21][mtr1] Got 7 new readings from meter:
> [Jan 26 09:04:21][mtr1] Reading: id=1-0:1.8.0*255/ObisItentifier:1-0:1.8.0*255 value=689827.40 ts=1422263061.162
> [Jan 26 09:04:21][mtr1] Reading: id=1-0:1.8.1*255/ObisItentifier:1-0:1.8.1*255 value=689827.40 ts=1422263061.162
> [Jan 26 09:04:21][mtr1] Reading: id=1-0:1.8.2*255/ObisItentifier:1-0:1.8.2*255 value=0.00 ts=1422263061.162
> [Jan 26 09:04:21][mtr1] Reading: id=1-0:16.7.0*255/ObisItentifier:1-0:16.7.0*255 value=2352.00 ts=1422263061.162
> [Jan 26 09:04:21][mtr1] Reading: id=1-0:36.7.0*255/ObisItentifier:1-0:36.7.0*255 value=743.00 ts=1422263061.162
> [Jan 26 09:04:21][mtr1] Reading: id=1-0:56.7.0*255/ObisItentifier:1-0:56.7.0*255 value=738.00 ts=1422263061.162
> [Jan 26 09:04:21][mtr1] Reading: id=1-0:76.7.0*255/ObisItentifier:1-0:76.7.0*255 value=871.00 ts=1422263061.162
> [Jan 26 09:04:21][chn1] Adding reading to queue (value=689827.40 ts=1422263061.162)
> [Jan 26 09:04:21][chn1] ==> number of tuples: 1
> [Jan 26 09:04:21][chn1] compare: 0 1422263061162 1422263061162.205078
> [Jan 26 09:04:21][chn1] JSON request body: [ [ 1422263061162.205078, 689827.400000 ] ]
> [Jan 26 09:04:21][chn1] Buffer dump (size=0 keep=32): {}
> [Jan 26 09:04:21][mtr1] Next reading in 600 seconds
> [Jan 26 09:04:21][chn1] CURL: About to connect() to 127.0.0.1 port 80 (#0)
> [Jan 26 09:04:21][chn1] CURL: Trying 127.0.0.1...
> [Jan 26 09:04:21][chn1] CURL: connected
> [Jan 26 09:04:21][chn1] CURL: Connected to 127.0.0.1 (127.0.0.1) port 80 (#0)
> [Jan 26 09:04:21][chn1] CURL: Sent 43 bytes..
> [Jan 26 09:04:21][chn1] CURL: Sent '[ [ 1422263061162.205078, 689827.400000 ] ]' bytes
> [Jan 26 09:04:21][chn1] CURL: upload completely sent off: 43 out of 43 bytes
> [Jan 26 09:04:21][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
> [Jan 26 09:04:21][mtr0] Got 7 new readings from meter:
> [Jan 26 09:04:21][mtr0] Reading: id=1-0:1.8.0*255/ObisItentifier:1-0:1.8.0*255 value=800396.40 ts=1422263061.707
> [Jan 26 09:04:21][mtr0] Reading: id=1-0:1.8.1*255/ObisItentifier:1-0:1.8.1*255 value=800396.40 ts=1422263061.707
> [Jan 26 09:04:21][mtr0] Reading: id=1-0:1.8.2*255/ObisItentifier:1-0:1.8.2*255 value=0.00 ts=1422263061.707
> [Jan 26 09:04:21][mtr0] Reading: id=1-0:16.7.0*255/ObisItentifier:1-0:16.7.0*255 value=2404.00 ts=1422263061.707
> [Jan 26 09:04:21][mtr0] Reading: id=1-0:36.7.0*255/ObisItentifier:1-0:36.7.0*255 value=177.00 ts=1422263061.707
> [Jan 26 09:04:21][mtr0] Reading: id=1-0:56.7.0*255/ObisItentifier:1-0:56.7.0*255 value=158.00 ts=1422263061.707
> [Jan 26 09:04:21][mtr0] Reading: id=1-0:76.7.0*255/ObisItentifier:1-0:76.7.0*255 value=2068.00 ts=1422263061.707
> [Jan 26 09:04:21][chn0] Adding reading to queue (value=800396.40 ts=1422263061.707)
> [Jan 26 09:04:21][chn0] ==> number of tuples: 1
> [Jan 26 09:04:21][chn0] compare: 0 1422263061707 1422263061707.106201
> [Jan 26 09:04:21][chn0] JSON request body: [ [ 1422263061707.106201, 800396.400000 ] ]
> [Jan 26 09:04:21][chn0] CURL: About to connect() to 127.0.0.1 port 80 (#0)
> [Jan 26 09:04:21][chn0] CURL: Trying 127.0.0.1...
> [Jan 26 09:04:21][chn0] CURL: connected
> [Jan 26 09:04:21][chn0] CURL: Connected to 127.0.0.1 (127.0.0.1) port 80 (#0)
> [Jan 26 09:04:21][chn0] CURL: Sent 43 bytes..
> [Jan 26 09:04:21][chn0] CURL: Sent '[ [ 1422263061707.106201, 800396.400000 ] ]' bytes
> [Jan 26 09:04:21][chn0] CURL: upload completely sent off: 43 out of 43 bytes
> [Jan 26 09:04:21][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
> [Jan 26 09:04:21][chn0] Buffer dump (size=0 keep=32): {}
> [Jan 26 09:04:21][mtr0] Next reading in 600 seconds
> [Jan 26 09:04:22][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
> [Jan 26 09:04:22][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
> [Jan 26 09:04:23][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
> [Jan 26 09:04:23][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
> [Jan 26 09:04:24][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
> [Jan 26 09:04:24][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
> [Jan 26 09:04:25][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
> [Jan 26 09:04:25][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
> [Jan 26 09:04:26][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
> [Jan 26 09:04:26][chn1] CURL: HTTP 1.1 or later with persistent connection, pipelining supported
> [Jan 26 09:04:26][chn1] CURL: Received 26 bytes
> [Jan 26 09:04:26][chn1] CURL: Received '{"version":"0.3","rows":1}' bytes
> [Jan 26 09:04:26][chn1] CURL: Connection #0 to host 127.0.0.1 left intact
> [Jan 26 09:04:26][chn1] CURL Request succeeded with code: 200
> [Jan 26 09:04:26][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
> [Jan 26 09:04:27][chn0] CURL: HTTP 1.1 or later with persistent connection, pipelining supported
> [Jan 26 09:04:27][chn0] CURL: Received 26 bytes
> [Jan 26 09:04:27][chn0] CURL: Received '{"version":"0.3","rows":1}' bytes
> [Jan 26 09:04:27][chn0] CURL: Connection #0 to host 127.0.0.1 left intact
> [Jan 26 09:04:27][chn0] CURL Request succeeded with code: 200
> ---------------
>
>
> hast du eine ahnung wie man den CURL: additional stuff not fine fehler beheben kann ?
>
> mfg
> jan
>
>
>
> 2015-01-26 11:23 GMT+01:00 Matthias Behr <mbehr at mcbehr.de>:
>
>> Ok. In dem Log ist kein Sprung sichtbar.
>> [Jan 25 20:54:17][chn0] Adding reading to queue (value=795554.60
>> ts=1422219257.039)
>> [Jan 25 20:54:18][chn1] Adding reading to queue (value=680592.00
>> ts=1422219258.619)
>> [Jan 25 21:04:17][chn0] Adding reading to queue (value=795554.90
>> ts=1422219857.050)
>> [Jan 25 21:04:18][chn1] Adding reading to queue (value=680592.00
>> ts=1422219858.639)
>> [Jan 25 21:14:17][chn0] Adding reading to queue (value=795555.20
>> ts=1422220457.062)
>> [Jan 25 21:14:18][chn1] Adding reading to queue (value=680592.00
>> ts=1422220458.662)
>>
>> Kannst du einen Log schicken (oder eine Zeitangabe), wo ein Sprung war?
>>
>> Am 26.01.2015 um 18:05 schrieb Jan Goe <jan.andrea7 at googlemail.com>:
>>
>> ja ich habe 2 Meter angeschlossen ( 1x für wohnung 1x für die wäremepumpe
>> )
>>
>> hier die config:
>>
>> ---------------
>> /**
>> * vzlogger configuration
>> *
>> * use proper encoded JSON with javascript comments
>> *
>> * take a look at the wiki for detailed information:
>> *
>> http://wiki.volkszaehler.org/software/controller/vzlogger#configuration
>> */
>>
>> {
>> "retry" : 30, /* how long to sleep between failed
>> requests, in seconds */
>> "daemon": true, /* run periodically */
>> "foreground" : true, /* dont run in background (prevents
>> forking) */
>>
>> "verbosity" : 15, /* between 0 and 15 */
>> "log" : "/var/log/vzlogger.log",/* path to logfile, optional */
>>
>> "local" : {
>> "enabled" : false, /* should we start the local HTTPd for
>> serving live readings? */
>> "port" : 80, /* the TCP port for the local HTTPd */
>> "index" : true, /* should we provide a index listing of
>> available channels? */
>> "timeout" : 30, /* timeout for long polling comet
>> requests, 0 disables comet, in seconds */
>> "buffer" : 600 /* how long to buffer readings for the
>> local interface, in seconds */
>> },
>>
>> "meters" : [{
>> "enabled" : true, /* disabled meters will be ignored */
>> "protocol" : "sml", /* use 'vzlogger -h' for list of
>> available protocols */
>> "device" : "/dev/usb-ir-lesekopf0",
>> "interval": 600,
>> "channels": [{
>> "uuid" : "11c04d20-a31e-11e4-8745-d1d65d1da157",
>> "middleware" : "
>> http://127.0.0.1/volkszaehler.org/htdocs/middleware.php",
>> "identifier" : "1-0:1.8.0",
>> }]
>>
>> },{
>> "enabled" : true, /* disabled meters will be ignored */
>> "protocol" : "sml", /* use 'vzlogger -h' for list of
>> available protocols */
>> "device" : "/dev/usb-ir-lesekopf1",
>> "interval": 600,
>> "channels": [{
>> "uuid" : "f9d00040-a47e-11e4-8bb8-edea5119d3cf",
>> "middleware" : "
>> http://127.0.0.1/volkszaehler.org/htdocs/middleware.php",
>> "identifier" : "1-0:1.8.0",
>> }]
>> },
>> ]}
>>
>> ---------------------------
>>
>> 2015-01-25 23:33 GMT+01:00 Matthias Behr <mbehr at mcbehr.de>:
>>
>>> Du hast 2 Meter angeschlossen, oder? Kannst du mal die ganze Config
>>> schicken?
>>>
>>> [Jan 25 21:14:17][mtr0] Reading:
>>> id=1-0:1.8.0*255/ObisItentifier:1-0:1.8.0*255 value=795555.20
>>> ts=1422220457.062
>>> [Jan 25 21:14:18][mtr1] Reading:
>>> id=1-0:1.8.0*255/ObisItentifier:1-0:1.8.0*255 value=680592.00
>>> ts=1422220458.662
>>>
>>>
>>>
>>> Am 26.01.2015 um 06:23 schrieb Jan Goe <jan.andrea7 at googlemail.com>:
>>>
>>> hallo im anhang die vzlogger.log
>>>
>>> 2015-01-25 22:16 GMT+01:00 Matthias Behr <mbehr at mcbehr.de>:
>>>
>>>> Kannst du mal ein Log mitschicken?
>>>> Die Frage ist, ob das zB durch falsches Parsen oder Bitfehler bei der
>>>> Übertragung passiert.
>>>>
>>>> Gruß
>>>> Matthias
>>>>
>>>> Sent from a mobile device.
>>>>
>>>> Am 26.01.2015 um 01:34 schrieb Nils Radde <nils.rasmus at googlemail.com>:
>>>>
>>>>
>>>>
>>>> Moin zusammen,
>>>>
>>>>
>>>>
>>>> ich habe mir den Auslesekopf (USB) von Udo gekauft und möchte damit
>>>> mein Easymeter Q3D auslesen.
>>>>
>>>> Dieses klappt eigentlich ganz gut, nur das ich immer sehr hohe spitzen
>>>> drin habe.
>>>>
>>>> Sowas wie 24 MW.
>>>>
>>>>
>>>>
>>>> Wie bekomme ich diese weg. Ich schicke euch meine vzlogger conf mal mit.
>>>>
>>>>
>>>>
>>>> /**
>>>>
>>>> * vzlogger configuration
>>>>
>>>> *
>>>>
>>>> * use proper encoded JSON with javascript comments
>>>>
>>>> *
>>>>
>>>> * take a look at the wiki for detailed information:
>>>>
>>>> *
>>>> http://wiki.volkszaehler.org/software/controller/vzlogger#configuration
>>>>
>>>> */
>>>>
>>>>
>>>>
>>>> {
>>>>
>>>> "retry" : 30, /* how long to sleep between failed requests, in seconds
>>>> */
>>>>
>>>> "daemon": true, /* run periodically */
>>>>
>>>> //"foreground" : true, /* dont run in background (prevents forking) */
>>>>
>>>> "verbosity" : 1, /* between 0 and 15 */
>>>>
>>>> "log" : "/var/log/vzlogger.log", /* path to logfile, optional */
>>>>
>>>>
>>>>
>>>> "local" : {
>>>>
>>>> "enabled" : false, /* should we start the local HTTPd for serving live
>>>> readings? */
>>>>
>>>> "port" : 80, /* the TCP port for the local HTTPd */
>>>>
>>>> "index" : true, /* should we provide a index listing of available
>>>> channels if no UUID was requested? */
>>>>
>>>> "timeout" : 30, /* timeout for long polling comet requests, 0 disables
>>>> comet, in seconds */
>>>>
>>>> "buffer" : 600 /* how long to buffer readings for the local interface,
>>>> in seconds */
>>>>
>>>> },
>>>>
>>>>
>>>>
>>>> "meters" : [{
>>>>
>>>> "enabled" : true, /* disabled meters will be ignored */
>>>>
>>>> "protocol" : "d0", /* see 'vzlogger -h' for list of available
>>>> prot$ */
>>>>
>>>> "device" : "/dev/usb-ir-lesekopf",
>>>>
>>>> "channels": [{
>>>>
>>>> "uuid" : "9176b410-a273-11e4-9298-d98f4ffd1494",
>>>>
>>>> "middleware" : "http://localhost/middleware.php",
>>>>
>>>> "identifier" : "1-0:1.7.255",
>>>>
>>>> }, {
>>>>
>>>> "uuid" : "57829b20-a271-11e4-88bc-c33ce80d3bd2",
>>>>
>>>> "middleware" : "http://localhost/middleware.php",
>>>>
>>>> "identifier" : "1-0:1.8.0"
>>>>
>>>> }]
>>>>
>>>> }]
>>>>
>>>> }
>>>>
>>>>
>>>>
>>>> Danke
>>>>
>>>>
>>> <vzlogger.log>
>>>
>>>
>>>
>>
>> Gruß
>>
>> Matthias Behr
>>
>>
>
> Gruß
>
> Matthias Behr
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://demo.volkszaehler.org/pipermail/volkszaehler-users/attachments/20150126/c960a21f/attachment-0001.html>
More information about the volkszaehler-users
mailing list