[vz-users] Fwd: Re: Erweiterung installieren - RPI
News
news at spider-wolf.de
Sun Oct 18 07:56:39 CEST 2015
Hallo,
habe keine Rückantwort erhalten. Hat niemand eine Idee wo mein Fehler ist??
Mit freundlichen Grüßen
Daniel
> Am 14.10.2015 um 14:55 schrieb News <news at spider-wolf.de>:
>
> Hallo,
>
> meine rc.local:
>
> #!/bin/sh -e
> #
> # rc.local
> #
> # This script is executed at the end of each multiuser runlevel.
> # Make sure that the script will "exit 0" on success or any other
> # value on error.
> #
> # In order to enable or disable this script just change the execution
> # bits.
> #
> # By default this script does nothing.
>
> # Print the IP address
> _IP=$(hostname -I) || true
> if [ "$_IP" ]; then
> printf "My IP address is %s\n" "$_IP"
> fi
>
> # Part of DS2482 I2C 1-Wire Master to Volkszaehler 'RaspberryPI deamon'.
> echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-1/new_device
> # echo ds2482 0x19 > /sys/bus/i2c/devices/i2c-1/new_device
> # echo ds2482 0x1a > /sys/bus/i2c/devices/i2c-1/new_device
>
> # Register I2C RTC, nur bei großer Erweiterung
> # echo ds1307 0x68 > /sys/bus/i2c/devices/i2c-1/new_device
>
> # Part of S0/Impulse to Volkszaehler 'RaspberryPI deamon','s0vz', nur bei alter große Erweiterung
> # echo 17 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio17/edge
> # echo 18 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio18/edge
> # echo 22 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio22/edge
> # echo 23 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio23/edge
> # echo 24 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio24/edge
> # echo 27 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio27/edge
>
> # Part of S0/Impulse to Volkszaehler 'RaspberryPI deamon','s0vz_new', nur bei neuer große Erweiterung
> # echo 4 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio4/edge
> # echo 18 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio18/edge
> # echo 17 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio17/edge
> # echo 23 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio23/edge
> # echo 27 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio27/edge
> # echo 22 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio22/edge
>
> # GPIOs exportieren und Datenrichtung einstellen, 'Schaltausgang_new'
> # echo 24 > /sys/class/gpio/export
> # echo 25 > /sys/class/gpio/export
> # echo out > /sys/class/gpio/gpio24/direction
> # echo out > /sys/class/gpio/gpio25/direction
>
> # GPIOs exportieren und Datenrichtung einstellen, 'Schaltausgang'
> echo 9 > /sys/class/gpio/export
> echo 11 > /sys/class/gpio/export
> echo out > /sys/class/gpio/gpio9/direction
> echo out > /sys/class/gpio/gpio11/direction
>
> # 1wirevz starten
> #/etc/init.d/1wirevz restart
>
> #s0vz starten
> #sudo s0vz
> #sudo s0vz_new
>
> #vzlogger starten
> sudo vzlogger -d
>
> #Set Systemtime from RTC
> # sudo hwclock -s
>
> exit 0
>
>
>
> und hier die vzlogger.conf:
> {
> "retry": 0,
> "daemon": true,
> "verbosity": 15,
> "log": "/var/log/vzlogger.log",
> // "push": [],
> "local": {
> "enabled": false,
> "port": 8080,
> "index": false,
> "timeout": 0,
> "buffer": 0
> },
> "meters": [
> {
> "enabled": true,
> "allowskip": false,
> "interval": -1,
> "aggtime": -1,
> "aggfixedinterval": false,
> "channels": [
> {
> "uuid": "e6f572e0-56d1-11e5-a2e3-9309764087d9",
> "identifier": "Impulse",
> "api": "volkszaehler",
> "middleware": "http://127.0.0.1/middleware.php",
> "secretKey": "",
> "type": "device",
> "scaler": 1,
> "aggmode": "none",
> "duplicates": 0
> }
> ],
> "protocol": "s0",
> "gpio": 24,
> "resolution": 1000,
> "configureGPIO": true,
> "debounce_delay": 0
> },
> {
> "enabled": true,
> "allowskip": false,
> "interval": -1,
> "aggtime": -1,
> "aggfixedinterval": false,
> "channels": [
> {
> "uuid": "b9a4f840-5607-11e5-bd7e-b5567e690b9d",
> "identifier": "Impulse",
> "api": "volkszaehler",
> "middleware": "http://127.0.0.1/middleware.php",
> "secretKey": "",
> "type": "device",
> "scaler": 1,
> "aggmode": "none",
> "duplicates": 0
> }
> ],
> "protocol": "s0",
> "gpio": 10,
> "resolution": 1000,
> "configureGPIO": true,
> "debounce_delay": 0
> },
> {
> "enabled": true,
> "allowskip": false,
> "interval": -1,
> "aggtime": -1,
> "aggfixedinterval": false,
> "channels": [
> {
> "uuid": "079e4d60-f03a-11e4-a1f2-8ba3458b66ed",
> "identifier": "Impulse",
> "api": "volkszaehler",
> "middleware": "http://127.0.0.1/middleware.php",
> "secretKey": "",
> "type": "device",
> "scaler": 1,
> "aggmode": "none",
> "duplicates": 0
> }
> ],
> "protocol": "s0",
> "gpio": 17,
> "resolution": 1000,
> "configureGPIO": true,
> "debounce_delay": 0
> },
> {
> "enabled": true,
> "allowskip": false,
> "interval": -1,
> "aggtime": -1,
> "aggfixedinterval": false,
> "channels": [
> {
> "uuid": "14d79bd0-f03a-11e4-85e9-edfdbad8043f",
> "identifier": "Impulse",
> "api": "volkszaehler",
> "middleware": "http://127.0.0.1/middleware.php",
> "secretKey": "",
> "type": "device",
> "scaler": 1,
> "aggmode": "none",
> "duplicates": 0
> }
> ],
> "protocol": "s0",
> "gpio": 23,
> "resolution": 1000,
> "configureGPIO": true,
> "debounce_delay": 0
> },
> {
> "enabled": true,
> "allowskip": false,
> "interval": -1,
> "aggtime": -1,
> "aggfixedinterval": false,
> "channels": [
> {
> "uuid": "24ef24a0-f03a-11e4-8653-2f3eb496bfb8",
> "identifier": "Impulse",
> "api": "volkszaehler",
> "middleware": "http://localhost/middleware.php",
> "secretKey": "",
> "type": "device",
> "scaler": 1,
> "aggmode": "none",
> "duplicates": 0
> }
> ],
> "protocol": "s0",
> "gpio": 27,
> "resolution": 1000,
> "configureGPIO": true,
> "debounce_delay": 0
> },
> {
> "enabled": true,
> "allowskip": false,
> "interval": -1,
> "aggtime": -1,
> "aggfixedinterval": false,
> "channels": [
> {
> "uuid": "777a37c0-56d2-11e5-b180-2f8252896f04",
> "identifier": "Impulse",
> "api": "volkszaehler",
> "middleware": "http://127.0.0.1/middleware.php",
> "secretKey": "",
> "type": "device",
> "scaler": 1,
> "aggmode": "none",
> "duplicates": 0
> }
> ],
> "protocol": "s0",
> "gpio": 22,
> "resolution": 1000,
> "configureGPIO": true,
> "debounce_delay": 0
> },
> {
> "enabled": true,
> "allowskip": false,
> "interval": -1,
> "aggtime": -1,
> "aggfixedinterval": false,
> "channels": [
> {
> "uuid": "68102e10-ef7c-11e4-a495-7f0a84de0257",
> "identifier": "28-000004508eec",
> "api": "volkszaehler",
> "middleware": "http://127.0.0.1/middleware.php",
> "secretKey": "",
> "type": "device",
> "scaler": 1,
> "aggmode": "none",
> "duplicates": 0
> },
> {
> "uuid": "9bee5e60-ef7c-11e4-80af-6b56ff429c5f",
> "identifier": "28-00000450a4cc",
> "api": "volkszaehler",
> "middleware": "http://127.0.0.1/middleware.php",
> "secretKey": "",
> "type": "device",
> "scaler": 1,
> "aggmode": "none",
> "duplicates": 0
> },
> {
> "uuid": "c6cb4b20-ef7c-11e4-8fd6-972990841f29",
> "identifier": "28-00000450cbbd",
> "api": "volkszaehler",
> "middleware": "http://127.0.0.1/middleware.php",
> "secretKey": "",
> "type": "device",
> "scaler": 1,
> "aggmode": "none",
> "duplicates": 0
> }
> ],
> "protocol": "w1therm"
> }
> ]
> }
>
> Im Frontend habe ich drei S0 Kanäle erstellt die an den eingängen 3,4 und 5 an der Erweiterung angeklemmt wurden.
>
>
> Gruß
>
> Daniel
>
>
>
>
>
>> Am 06.10.2015 um 16:24 schrieb Udo1:
>> Hallo Daniel,
>>
>>> Am 06.10.2015 um 14:18 schrieb News:
>>> ich bekomme keinen Chart angezeigt. Hier mal ein Auszug aus der /var/log/vzlogger.log
>>
>> Ich wiederhole mich:
>>
>>> Poste mal deine jetzige komplette /etc/rc.local und /etc/vzlogger.conf.
>>> Was für einen Typ von Kanäle hast du im Frontend erstellt?
>>
>> Gruß
>> Udo
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://demo.volkszaehler.org/pipermail/volkszaehler-users/attachments/20151018/ead45546/attachment-0001.html>
More information about the volkszaehler-users
mailing list