[vz-users] Fwd: Re: Erweiterung installieren - RPI
News
news at spider-wolf.de
Sun Oct 18 08:57:38 CEST 2015
Hi,
Nein nur 3 Stück kann ich die anderen löschen. Habe nur meine Einstellungen eingetragen aber nichts gelöscht!
Mit freundlichen Grüßen
Daniel Kopf
> Am 18.10.2015 um 08:02 schrieb Matthias Behr <mbehr at mcbehr.de>:
>
> Hast du im Frontend alle uuids konfiguriert? Du hast ja 6 x S0 konfiguriert.
>
>> Am 18.10.2015 um 07:56 schrieb News <news at spider-wolf.de>:
>>
>> Hallo,
>>
>> habe keine Rückantwort erhalten. Hat niemand eine Idee wo mein Fehler ist??
>>
>> Mit freundlichen Grüßen
>>
>> Daniel
>>
>>> Am 14.10.2015 um 14:55 schrieb News <news at spider-wolf.de>:
>>>
>>> Hallo,
>>>
>>> meine rc.local:
>>>
>>> #!/bin/sh -e
>>> #
>>> # rc.local
>>> #
>>> # This script is executed at the end of each multiuser runlevel.
>>> # Make sure that the script will "exit 0" on success or any other
>>> # value on error.
>>> #
>>> # In order to enable or disable this script just change the execution
>>> # bits.
>>> #
>>> # By default this script does nothing.
>>>
>>> # Print the IP address
>>> _IP=$(hostname -I) || true
>>> if [ "$_IP" ]; then
>>> printf "My IP address is %s\n" "$_IP"
>>> fi
>>>
>>> # Part of DS2482 I2C 1-Wire Master to Volkszaehler 'RaspberryPI deamon'.
>>> echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-1/new_device
>>> # echo ds2482 0x19 > /sys/bus/i2c/devices/i2c-1/new_device
>>> # echo ds2482 0x1a > /sys/bus/i2c/devices/i2c-1/new_device
>>>
>>> # Register I2C RTC, nur bei großer Erweiterung
>>> # echo ds1307 0x68 > /sys/bus/i2c/devices/i2c-1/new_device
>>>
>>> # Part of S0/Impulse to Volkszaehler 'RaspberryPI deamon','s0vz', nur bei alter große Erweiterung
>>> # echo 17 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio17/edge
>>> # echo 18 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio18/edge
>>> # echo 22 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio22/edge
>>> # echo 23 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio23/edge
>>> # echo 24 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio24/edge
>>> # echo 27 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio27/edge
>>>
>>> # Part of S0/Impulse to Volkszaehler 'RaspberryPI deamon','s0vz_new', nur bei neuer große Erweiterung
>>> # echo 4 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio4/edge
>>> # echo 18 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio18/edge
>>> # echo 17 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio17/edge
>>> # echo 23 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio23/edge
>>> # echo 27 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio27/edge
>>> # echo 22 > /sys/class/gpio/export && echo "rising" > /sys/class/gpio/gpio22/edge
>>>
>>> # GPIOs exportieren und Datenrichtung einstellen, 'Schaltausgang_new'
>>> # echo 24 > /sys/class/gpio/export
>>> # echo 25 > /sys/class/gpio/export
>>> # echo out > /sys/class/gpio/gpio24/direction
>>> # echo out > /sys/class/gpio/gpio25/direction
>>>
>>> # GPIOs exportieren und Datenrichtung einstellen, 'Schaltausgang'
>>> echo 9 > /sys/class/gpio/export
>>> echo 11 > /sys/class/gpio/export
>>> echo out > /sys/class/gpio/gpio9/direction
>>> echo out > /sys/class/gpio/gpio11/direction
>>>
>>> # 1wirevz starten
>>> #/etc/init.d/1wirevz restart
>>>
>>> #s0vz starten
>>> #sudo s0vz
>>> #sudo s0vz_new
>>>
>>> #vzlogger starten
>>> sudo vzlogger -d
>>>
>>> #Set Systemtime from RTC
>>> # sudo hwclock -s
>>>
>>> exit 0
>>>
>>>
>>>
>>> und hier die vzlogger.conf:
>>> {
>>> "retry": 0,
>>> "daemon": true,
>>> "verbosity": 15,
>>> "log": "/var/log/vzlogger.log",
>>> // "push": [],
>>> "local": {
>>> "enabled": false,
>>> "port": 8080,
>>> "index": false,
>>> "timeout": 0,
>>> "buffer": 0
>>> },
>>> "meters": [
>>> {
>>> "enabled": true,
>>> "allowskip": false,
>>> "interval": -1,
>>> "aggtime": -1,
>>> "aggfixedinterval": false,
>>> "channels": [
>>> {
>>> "uuid": "e6f572e0-56d1-11e5-a2e3-9309764087d9",
>>> "identifier": "Impulse",
>>> "api": "volkszaehler",
>>> "middleware": "http://127.0.0.1/middleware.php",
>>> "secretKey": "",
>>> "type": "device",
>>> "scaler": 1,
>>> "aggmode": "none",
>>> "duplicates": 0
>>> }
>>> ],
>>> "protocol": "s0",
>>> "gpio": 24,
>>> "resolution": 1000,
>>> "configureGPIO": true,
>>> "debounce_delay": 0
>>> },
>>> {
>>> "enabled": true,
>>> "allowskip": false,
>>> "interval": -1,
>>> "aggtime": -1,
>>> "aggfixedinterval": false,
>>> "channels": [
>>> {
>>> "uuid": "b9a4f840-5607-11e5-bd7e-b5567e690b9d",
>>> "identifier": "Impulse",
>>> "api": "volkszaehler",
>>> "middleware": "http://127.0.0.1/middleware.php",
>>> "secretKey": "",
>>> "type": "device",
>>> "scaler": 1,
>>> "aggmode": "none",
>>> "duplicates": 0
>>> }
>>> ],
>>> "protocol": "s0",
>>> "gpio": 10,
>>> "resolution": 1000,
>>> "configureGPIO": true,
>>> "debounce_delay": 0
>>> },
>>> {
>>> "enabled": true,
>>> "allowskip": false,
>>> "interval": -1,
>>> "aggtime": -1,
>>> "aggfixedinterval": false,
>>> "channels": [
>>> {
>>> "uuid": "079e4d60-f03a-11e4-a1f2-8ba3458b66ed",
>>> "identifier": "Impulse",
>>> "api": "volkszaehler",
>>> "middleware": "http://127.0.0.1/middleware.php",
>>> "secretKey": "",
>>> "type": "device",
>>> "scaler": 1,
>>> "aggmode": "none",
>>> "duplicates": 0
>>> }
>>> ],
>>> "protocol": "s0",
>>> "gpio": 17,
>>> "resolution": 1000,
>>> "configureGPIO": true,
>>> "debounce_delay": 0
>>> },
>>> {
>>> "enabled": true,
>>> "allowskip": false,
>>> "interval": -1,
>>> "aggtime": -1,
>>> "aggfixedinterval": false,
>>> "channels": [
>>> {
>>> "uuid": "14d79bd0-f03a-11e4-85e9-edfdbad8043f",
>>> "identifier": "Impulse",
>>> "api": "volkszaehler",
>>> "middleware": "http://127.0.0.1/middleware.php",
>>> "secretKey": "",
>>> "type": "device",
>>> "scaler": 1,
>>> "aggmode": "none",
>>> "duplicates": 0
>>> }
>>> ],
>>> "protocol": "s0",
>>> "gpio": 23,
>>> "resolution": 1000,
>>> "configureGPIO": true,
>>> "debounce_delay": 0
>>> },
>>> {
>>> "enabled": true,
>>> "allowskip": false,
>>> "interval": -1,
>>> "aggtime": -1,
>>> "aggfixedinterval": false,
>>> "channels": [
>>> {
>>> "uuid": "24ef24a0-f03a-11e4-8653-2f3eb496bfb8",
>>> "identifier": "Impulse",
>>> "api": "volkszaehler",
>>> "middleware": "http://localhost/middleware.php",
>>> "secretKey": "",
>>> "type": "device",
>>> "scaler": 1,
>>> "aggmode": "none",
>>> "duplicates": 0
>>> }
>>> ],
>>> "protocol": "s0",
>>> "gpio": 27,
>>> "resolution": 1000,
>>> "configureGPIO": true,
>>> "debounce_delay": 0
>>> },
>>> {
>>> "enabled": true,
>>> "allowskip": false,
>>> "interval": -1,
>>> "aggtime": -1,
>>> "aggfixedinterval": false,
>>> "channels": [
>>> {
>>> "uuid": "777a37c0-56d2-11e5-b180-2f8252896f04",
>>> "identifier": "Impulse",
>>> "api": "volkszaehler",
>>> "middleware": "http://127.0.0.1/middleware.php",
>>> "secretKey": "",
>>> "type": "device",
>>> "scaler": 1,
>>> "aggmode": "none",
>>> "duplicates": 0
>>> }
>>> ],
>>> "protocol": "s0",
>>> "gpio": 22,
>>> "resolution": 1000,
>>> "configureGPIO": true,
>>> "debounce_delay": 0
>>> },
>>> {
>>> "enabled": true,
>>> "allowskip": false,
>>> "interval": -1,
>>> "aggtime": -1,
>>> "aggfixedinterval": false,
>>> "channels": [
>>> {
>>> "uuid": "68102e10-ef7c-11e4-a495-7f0a84de0257",
>>> "identifier": "28-000004508eec",
>>> "api": "volkszaehler",
>>> "middleware": "http://127.0.0.1/middleware.php",
>>> "secretKey": "",
>>> "type": "device",
>>> "scaler": 1,
>>> "aggmode": "none",
>>> "duplicates": 0
>>> },
>>> {
>>> "uuid": "9bee5e60-ef7c-11e4-80af-6b56ff429c5f",
>>> "identifier": "28-00000450a4cc",
>>> "api": "volkszaehler",
>>> "middleware": "http://127.0.0.1/middleware.php",
>>> "secretKey": "",
>>> "type": "device",
>>> "scaler": 1,
>>> "aggmode": "none",
>>> "duplicates": 0
>>> },
>>> {
>>> "uuid": "c6cb4b20-ef7c-11e4-8fd6-972990841f29",
>>> "identifier": "28-00000450cbbd",
>>> "api": "volkszaehler",
>>> "middleware": "http://127.0.0.1/middleware.php",
>>> "secretKey": "",
>>> "type": "device",
>>> "scaler": 1,
>>> "aggmode": "none",
>>> "duplicates": 0
>>> }
>>> ],
>>> "protocol": "w1therm"
>>> }
>>> ]
>>> }
>>>
>>> Im Frontend habe ich drei S0 Kanäle erstellt die an den eingängen 3,4 und 5 an der Erweiterung angeklemmt wurden.
>>>
>>>
>>> Gruß
>>>
>>> Daniel
>>>
>>>
>>>
>>>
>>>
>>>> Am 06.10.2015 um 16:24 schrieb Udo1:
>>>> Hallo Daniel,
>>>>
>>>>> Am 06.10.2015 um 14:18 schrieb News:
>>>>> ich bekomme keinen Chart angezeigt. Hier mal ein Auszug aus der /var/log/vzlogger.log
>>>>
>>>> Ich wiederhole mich:
>>>>
>>>>> Poste mal deine jetzige komplette /etc/rc.local und /etc/vzlogger.conf.
>>>>> Was für einen Typ von Kanäle hast du im Frontend erstellt?
>>>>
>>>> Gruß
>>>> Udo
>>>>
>>>
>
> Gruß
>
> Matthias
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://demo.volkszaehler.org/pipermail/volkszaehler-users/attachments/20151018/07f3f78d/attachment-0001.html>
More information about the volkszaehler-users
mailing list