[vz-users] Fwd: keine Werte im Frontend
Andreas Götz
cpuidle at gmail.com
Tue Dec 6 18:27:59 CET 2016
Die Fragen ändern sich auch bei Doppelposting nicht? Hilf uns Dir zu helfen ;)
Viele Grüße,
Andreas
> Am 06.12.2016 um 18:17 schrieb johannes <johannes.wimmer006 at gmail.com>:
>
> Hallo,
>
> Hier nun die gleiche Anfrage noch einmal etwas Verändert bitte diesen Thread verwenden. Danke!
>
>
> ich bräuchte bitte kurz Hilfe, lese einen OSM Zähler aus, aber im
> Volkszähler-Frontend werden keine Werte angezeigt. Den Kanal habe ich im
> Frontend erstellt.
>
>
> Wenn ich als "push-url" http://192.168.0.101/push/data.json verwende
> bekomme ich Fehler 404 zurück und mit meiner aktuellen Einstellung 200
> was ok sein sollte aber trozdem kommen keine Werte im Frontend an.
>
>
> Meine Config ist die aktuelle vzlogger.conf.OSMmeter Datei an mein
> System angepasst:
>
> // General settings
> "daemon": false, // run periodically
> "verbosity":15, // log verbosity (0=log_error and
> log_warning, 5=log_info, 10=log_debug, 15=log_finest)
> "log": "/var/log/vzlogger.log", // log file, optional
> "retry": 30, // http retry delay in seconds
>
> // Build-in HTTP server
> "local": {
> "enabled": true, // enable local HTTPd for serving live readings
> "port": 8080, // TCP port for local HTTPd
> "index": true, // provide index listing of available
> channels if no UUID was requested
> "timeout": 30, // timeout for long polling comet requests
> in seconds (0 disables comet)
> "buffer": -1 // HTTPd buffer configuration for serving
> readings, default -1
> // >0: number of seconds of readings to serve
> // <0: number of tuples to server per
> channel (e.g. -3 will serve 3 tuples)
> },
>
> // realtime notification settings
> "push": [
> {
> "url": "http://192.168.0.101" // notification destination,
> e.g. frontend push-server
> }
> ],
>
> // Meter configuration
>
> "meters": [
> // example for OMS (M-Bus based) meter
> {
> "enabled" : true,
> "skip": false,
> "interval": -1,
> "aggtime": -60,
> "aggfixedinterval": true,
> "protocol": "oms",
> "device": "/dev/ttyUSB0",
> "baudrate": 9600, // optional default 9600
> "key": "zensiert", // AES key
> in hex without spaces. Needs to be exactly 32 chars
> "mbus_debug": false, // optional provide additional
> debug output from libmbus on the console/stderr/stdout
>
> "channel": { // example channel.
> multiple channels supported as well
> "api": "volkszaehler",
> "uuid": "072d3960-b230-11e6-b31e-292a827213ce",
> "middleware": "http://127.0.0.1/middleware.php",
> "identifier": "1.7.0" // currently 1.7.0, 1.8.0,
> 2.7.0, 2.8.0 supported
> }
>
> }
> ]
> }
>
> und das ist meine Log-datei:
>
> [Dec 06 17:45:10][main] vzlogger v0.6.0 based on
> heads/master-0-g462c3077bd from Sun, 30 Oct 2016 15:07:12 +0100 started.
> [Dec 06 17:45:10][mtr0] Creating new meter with protocol oms.
> [Dec 06 17:45:10][oms] Using libmbus version 0.8.0
> [Dec 06 17:45:10][mtr0] Meter configured, enabled.
> [Dec 06 17:45:10] New meter initialized (protocol=oms)
> [Dec 06 17:45:10] Configure channel.
> [Dec 06 17:45:10][chn0] New channel initialized (uuid=...7213ce
> api=volkszaehler id=1.7.0)
> [Dec 06 17:45:10] Have 1 meters.
> [Dec 06 17:45:10][main] log level is 15
> [Dec 06 17:45:10][main] daemon=0, local=1
> [Dec 06 17:45:10] Process not daemonized...
> [Dec 06 17:45:10] Opened logfile /var/log/vzlogger.log
> [Dec 06 17:45:10][push] pushdata_thread created.
> [Dec 06 17:45:10][] ===> Start meters
> [Dec 06 17:45:10][push] Start push_data_thread
> [Dec 06 17:45:10][mtr0] Meter connection established
> [Dec 06 17:45:10][mtr0] Meter thread started
> [Dec 06 17:45:10][mtr0] Meter is opened. Starting channels.
> [Dec 06 17:45:10][chn0] Logging thread not started
> [Dec 06 17:45:10][http] Starting local interface HTTPd on port 8080
> [Dec 06 17:45:10][] Startup done.
> [Dec 06 17:45:10][mtr0] Number of readers: 100
> [Dec 06 17:45:10][mtr0] Config.daemon: 0
> [Dec 06 17:45:10][mtr0] Config.local: 1
> [Dec 06 17:45:10][mtr0] Got 0 new readings from meter:
> [Dec 06 17:45:10][mtr0] Got 0 new readings from meter:
> [Dec 06 17:45:10][mtr0] Got 0 new readings from meter:
> [Dec 06 17:45:10][mtr0] Got 0 new readings from meter:
> [Dec 06 17:45:10][oms] got valid mbus frame with len=95, type=4
> control=73 controlinfo=5b address=f0
> [Dec 06 17:45:10][oms] got SND_UD without SND_NKE
> [Dec 06 17:45:10][oms] got SND_UD packet
> [Dec 06 17:45:10][oms] control_word = 0x550
> [Dec 06 17:45:10][oms] AES with dyn. init. vector for 5 16-byte blocks
> plus 3 unencrypted data bytes
> [Dec 06 17:45:10][oms] successfully decrypted a frame
> [Dec 06 17:45:10][oms] got 10 data records: active mbus_debug for
> detail infos
> [Dec 06 17:45:10][oms] DIF=06, NDIFE=00, DIFE1=00, VIF=6d, NVIFE=00
> VIFE1=00 VIFE2=00
> [Dec 06 17:45:10][oms] time=2016-12-06 17:45:16
> [Dec 06 17:45:10][oms] DIF=04, NDIFE=00, DIFE1=00, VIF=03, NVIFE=00
> VIFE1=00 VIFE2=00
> [Dec 06 17:45:10][oms] Obis 1.8.0 102505.000000 Energy (Wh)
> [Dec 06 17:45:10][oms] DIF=04, NDIFE=00, DIFE1=00, VIF=83, NVIFE=01
> VIFE1=3c VIFE2=00
> [Dec 06 17:45:10][oms] Obis 2.8.0 7956.000000 Energy (Wh)
> [Dec 06 17:45:10][oms] DIF=84, NDIFE=01, DIFE1=10, VIF=fb, NVIFE=02
> VIFE1=82 VIFE2=73
> [Dec 06 17:45:10][oms] DIF=84, NDIFE=01, DIFE1=10, VIF=fb, NVIFE=03
> VIFE1=82 VIFE2=f3
> [Dec 06 17:45:10][oms] DIF=04, NDIFE=00, DIFE1=00, VIF=2b, NVIFE=00
> VIFE1=00 VIFE2=00
> [Dec 06 17:45:10][oms] Obis 1.7.0 2018.000000 Power (W)
> [Dec 06 17:45:10][oms] DIF=04, NDIFE=00, DIFE1=00, VIF=ab, NVIFE=01
> VIFE1=3c VIFE2=00
> [Dec 06 17:45:10][oms] Obis 2.7.0 0.000000 Power (W)
> [Dec 06 17:45:10][oms] DIF=04, NDIFE=00, DIFE1=00, VIF=fb, NVIFE=01
> VIFE1=14 VIFE2=00
> [Dec 06 17:45:10][oms] DIF=04, NDIFE=00, DIFE1=00, VIF=fb, NVIFE=02
> VIFE1=94 VIFE2=3c
> [Dec 06 17:45:10][oms] DIF=04, NDIFE=00, DIFE1=00, VIF=83, NVIFE=02
> VIFE1=ff VIFE2=04
> [Dec 06 17:45:10][mtr0] Got 4 new readings from meter:
> [Dec 06 17:45:11][mtr0] Reading:
> id=255-255:1.8.0*255/ObisIdentifier:255-255:1.8.0*255 value=102505.00
> ts=1481042716000
> [Dec 06 17:45:11][mtr0] Reading:
> id=255-255:2.8.0*255/ObisIdentifier:255-255:2.8.0*255 value=7956.00
> ts=1481042716000
> [Dec 06 17:45:11][mtr0] Reading:
> id=255-255:1.7.0*255/ObisIdentifier:255-255:1.7.0*255 value=2018.00
> ts=1481042716000
> [Dec 06 17:45:11][mtr0] Reading:
> id=255-255:2.7.0*255/ObisIdentifier:255-255:2.7.0*255 value=0.00
> ts=1481042716000
> [Dec 06 17:45:11][chn0] Adding reading to queue (value=2018.00
> ts=1481042716000)
> [Dec 06 17:45:11][push] push: { "data": [ { "uuid":
> "072d3960-b230-11e6-b31e-292a827213ce", "tuples": [ [ 1481042716000,
> 2018 ] ] } ] }
> [Dec 06 17:45:11][push] added to uuid 072d3960-b230-11e6-b31e-292a827213ce
> [Dec 06 17:45:11][push] CURL Request to http://192.168.0.101 succeeded
> with code: 200
> [Dec 06 17:45:11][push] send ok to url http://192.168.0.101
>
>
>
>
> kann mir da bitte Jemand weiter helfen.
> lg Johannes
>
More information about the volkszaehler-users
mailing list