[vz-users] Neueinrichtung Easymeter Q3D-Zähler
Frank Richter
frank.richter83 at gmail.com
Sat Jan 2 19:49:13 CET 2016
Deine vzlogger.conf ist falsch, du brauchst 1 meter mit 6 channels, nicht 6
meter.
Gruß
Frank
2016-01-02 19:43 GMT+01:00 Thomas Hümmerich <thomas.huemmerich at arcor.de>:
> Hallo,
> nothing to plot - hier die Daten dazu:
>
> cat /dev/ttyUSB0 liefert:
>
> 1-0:1.8.0*255(0000xxx.xx*kWh)
>
> 1-0:2.8.0*255(000xxx.xx*kWh)
>
> 1-0:21.7.0*255(000xx.xx*W)
>
> 1-0:41.7.0*255(000xxx.xx*W)
>
> 1-0:61.7.0*255(000xxx.xx*W)
>
> 1-0:1.7.0*255(000xxx.xx*W)
>
> 1-0:96.5.5*255(80)
>
> Also lege ich im Frontend an:
> 2 Mal El. Energie (Zählerstände) für die Zählerstände Verbrauch und
> Lieferung
> 4 Mal El. Energie (Leistungswerte) für die Leistung der 3 Phasen und die
> Gesamtleistung
>
> Muss man 96.5.5 auch einrichten?
>
> Hier Auszüge aus der daraus entstandenen CONFIG:
> {
> "retry": 30,
> "daemon": false,
> "verbosity": 15,
> "log": "/var/log/vzlogger.log",
> "push": [],
> "local": {
> "enabled": false,
> "port": 8080,
> "index": true,
> "timeout": 30,
> "buffer": 600
> },
> "meters": [
> {
> "enabled": true,
> "allowskip": false,
> "interval": 10,
> "aggtime": -1,
> "aggfixedinterval": false,
> "channels": [
> {
> "uuid": "608995d0-b139-11e5-a1ec-d95b72cab6b6",
> "identifier": "1-0: 1.8.0",
> "api": "volkszaehler",
> "middleware": "http://localhost/middleware.php",
> "secretKey": "",
> "type": "device",
> "scaler": 1,
> "aggmode": "max",
> "duplicates": 0
> }
> ],
> "protocol": "d0",
> "device": "/dev/ttyUSB0",
> "host": "",
> "dump_file": "",
> "pullseq": "",
> "ackseq": "auto",
> "baudrate": 9600,
> "baudrate_read": 300,
> "parity": "7e1",
> "wait_sync": "off",
> "read_timeout": 10,
> "baudrate_change_delay": 0,
> "gpio": -1,
> "mmap": "",
> "gpio_dir": -1,
> "configureGPIO": true,
> "resolution": 1000,
> "send_zero": false,
> "debounce_delay": 30,
> "nonblocking_delay": 100000
> },
> {
> "enabled": true,
> "allowskip": false,
> "interval": 10,
> "aggtime": -1,
> "aggfixedinterval": false,
> "channels": [
> {
> "uuid": "5457c240-b139-11e5-9771-fdb30fb5759c",
> "identifier": "1-0: 2.8.0",
> "api": "volkszaehler",
> "middleware": "http://localhost/middleware.php",
> "secretKey": "",
> "type": "device",
> "scaler": 1,
> "aggmode": "max",
> "duplicates": 0
> }
> ],
> "protocol": "d0",
> "device": "/dev/ttyUSB0",
> "host": "",
> "dump_file": "",
> "pullseq": "",
> "ackseq": "auto",
> "baudrate": 9600,
> "baudrate_read": 300,
> "parity": "7e1",
> "wait_sync": "off",
> "read_timeout": 10,
> "baudrate_change_delay": 0,
> "gpio": -1,
> "mmap": "",
> "gpio_dir": -1,
> "configureGPIO": true,
> "resolution": 1000,
> "send_zero": false,
> "debounce_delay": 30,
> "nonblocking_delay": 100000
> },
> {
> "enabled": true,
> "allowskip": false,
> "interval": 10,
> "aggtime": -1,
> "aggfixedinterval": false,
> "channels": [
> {
> "uuid": "731ef1c0-b139-11e5-91c9-17c1aec912ff",
> "identifier": "1-0: 21.7.0",
> "api": "volkszaehler",
> "middleware": "http://localhost/middleware.php",
> "secretKey": "",
> "type": "device",
> "scaler": 1,
> "aggmode": "avg",
> "duplicates": 0
> }
> ],
> "protocol": "d0",
> "device": "/dev/ttyUSB0",
> "host": "",
> "dump_file": "",
> "pullseq": "",
> "ackseq": "auto",
> "baudrate": 9600,
> "baudrate_read": 300,
> "parity": "7e1",
> "wait_sync": "off",
> "read_timeout": 10,
> "baudrate_change_delay": 0
> },
>
> Auszug aus der LOG-Datei:
>
> [Jan 02 19:26:41] Opened logfile /var/log/vzlogger.log
> [Jan 02 19:26:41][push] pushdata_thread created.
> [Jan 02 19:26:41][push] [Jan 02 19:26:41][] Start push_data_thread===>
> Start meters
>
> [Jan 02 19:26:41][s0] counter_thread created
> [Jan 02 19:26:41][mtr0] Meter connection established
> [Jan 02 19:26:41][s0] Counter thread started with blocking hwif
> [Jan 02 19:26:41][S0] MeterS0:HWIF_GPIO:first poll returned 1
> [Jan 02 19:26:41][mtr0] Meter thread started
> [Jan 02 19:26:41][mtr0] Meter is opened. Starting channels.
> [Jan 02 19:26:41][chn0] Logging thread started
> [Jan 02 19:26:41][chn0] Start logging thread for volkszaehler-api. Running
> as daemon: yes
> [Jan 02 19:26:41][chn0] Using default volkszaehler api.
> [Jan 02 19:26:41][s0] counter_thread created
> [Jan 02 19:26:41][mtr1] Meter connection established
> [Jan 02 19:26:41][mtr1] Meter thread started
> [Jan 02 19:26:41][mtr1] Meter is opened. Starting channels.
> [Jan 02 19:26:41][chn1] Logging thread started
> [Jan 02 19:26:41][s0] Counter thread started with blocking hwif
> [Jan 02 19:26:41][S0] MeterS0:HWIF_GPIO:first poll returned 1
> [Jan 02 19:26:41][mtr0] Number of readers: 4
> [Jan 02 19:26:41][mtr0] Config.daemon: 1
> [Jan 02 19:26:41][mtr0] Config.local: 0
> [Jan 02 19:26:41][mtr1] Number of readers: 4
> [Jan 02 19:26:41][mtr1] Config.daemon: 1
> [Jan 02 19:26:41][mtr1] Config.local: 0
> [Jan 02 19:26:41][chn1] Start logging thread for volkszaehler-api. Running
> as daemon: yes
> [Jan 02 19:26:41][chn1] Using default volkszaehler api.
> [Jan 02 19:26:41][s0] counter_thread created
> [Jan 02 19:26:41][mtr2] Meter connection established
> [Jan 02 19:26:41][mtr2] Meter thread started
> [Jan 02 19:26:41][mtr2] Meter is opened. Starting channels.
> [Jan 02 19:26:41][chn2] Logging thread started
> [Jan 02 19:26:41][s0] Counter thread started with blocking hwif
> [Jan 02 19:26:41][S0] MeterS0:HWIF_GPIO:first poll returned 1
> [Jan 02 19:26:41][chn2] Start logging thread for volkszaehler-api. Running
> as daemon: yes
> [Jan 02 19:26:41][chn2] Using default volkszaehler api.
> [Jan 02 19:26:41][mtr2] Number of readers: 4
> [Jan 02 19:26:41][mtr2] Config.daemon: 1
> [Jan 02 19:26:41][mtr2] Config.local: 0
> [Jan 02 19:26:41][s0] Counter thread started with blocking hwif
> [Jan 02 19:26:41][S0] MeterS0:HWIF_GPIO:first poll returned 1
> [Jan 02 19:26:41][s0] counter_thread created
> [Jan 02 19:26:41][mtr3] Meter connection established
> [Jan 02 19:26:41][mtr3] Meter thread started
> [Jan 02 19:26:41][mtr3] Meter is opened. Starting channels.
> [Jan 02 19:26:41][mtr3] Number of readers: 4
> [Jan 02 19:26:41][mtr3] Config.daemon: 1
> [Jan 02 19:26:41][mtr3] Config.local: 0
> [Jan 02 19:26:41][chn3] Logging thread started
> [Jan 02 19:26:41][chn3] Start logging thread for volkszaehler-api. Running
> as daemon: yes
> [Jan 02 19:26:41][chn3] Using default volkszaehler api.
> [Jan 02 19:26:41][s0] counter_thread created
> [Jan 02 19:26:41][mtr4] Meter connection established
> [Jan 02 19:26:41][mtr4] Meter thread started
> [Jan 02 19:26:41][mtr4] Meter is opened. Starting channels.
> [Jan 02 19:26:41][chn4] Logging thread started
> [Jan 02 19:26:41][s0] counter_thread created
> [Jan 02 19:26:41][mtr5] Meter connection established
> [Jan 02 19:26:41][mtr5] Meter thread started
> [Jan 02 19:26:41][mtr5] Meter is opened. Starting channels.
> [Jan 02 19:26:41][chn5] Logging thread started
> [Jan 02 19:26:41][mtr4] Number of readers: 4
> [Jan 02 19:26:41][mtr4] Config.daemon: 1
> [Jan 02 19:26:41][mtr4] Config.local: 0
> [Jan 02 19:26:41][s0] Counter thread started with blocking hwif
> [Jan 02 19:26:41][S0] MeterS0:HWIF_GPIO:first poll returned 1
> [Jan 02 19:26:41][w1t] scanW1devices failed!
> [Jan 02 19:26:41][mtr6] Cannot open meter
> [Jan 02 19:26:41][] Startup failed: Meter open failed.
>
> Im Log steht S0, ich habe aber doch D0 - wie in der Doku zum Q3D
> beschrieben - eingerichtet?
>
> Weiß jemand bitte Rat?
>
> Danke und Gruß,
> Thomas
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://demo.volkszaehler.org/pipermail/volkszaehler-users/attachments/20160102/75487b7f/attachment.html>
More information about the volkszaehler-users
mailing list