[vz-users] New user, can't even get the basics working....

[Andreas Götz]

And please lets disconnect _everything_ except gpio 22 for the time being. Then logfile. Then feel free to check if you can receive anything on gpio 22 using wiringpi. If that fails, too, then 22 might be fried as Daniel wrote.

Give us a chance to follow you, step by step, not in leaps ;)

Cheers,
Andreas

> Am 15.09.2016 um 15:38 schrieb Daniel Lauckner <vz at jahp.de>:
> 
> Hallo,
> 
> 
> am Donnerstag, 15. September 2016 um 14:42 hast du geschrieben:
>> Energie gebruik            "uuid":
>> "dd995220-7a47-11e6-86ce-6bf65a52ce09", GPIO 4   Works
>> Energie opbrengst          "uuid":
>> "dfc58710-7a47-11e6-9278-45f4e725fa39", GPIO 22  Does not work
>> Gas                        "uuid":
>> "6823ec50-7a48-11e6-ba8f-eb092025f059", GPIO 24  Not yet sure if it
>> works, I think it doesn't, never got readings
>> Water                      "uuid":
>> "7265eee0-7a48-11e6-9eb5-fd85707de1a1", GPIO 25  Works
> 
>> Exchanging the wires GPIO 4 and GPIO 22 results in a working GPIO 4
>> so then you seen the "Energie opbrengst" messures in the "Energie gebruik" graphics.
>> Same for exchanging GPIO 4 and GPIO 22 in the config file, but then
>> you seen the "Energie gebruik" messures in the "Energie opbrengst" graphics.
> 
>> When I change the config file so there is only one meter with
>> GPIO22 and the right UUID there are NO messurments.
> 
>> So the conculusion would be that GPIO 22 is wrong or defective.
> 
> Yes.
> 
>> But
>> I checked this over and over and also tried other GPIO ports.
> 
> You did "it" again...
> I can follow only after you tell.
> 
>> Maybe I oversee something stupid....
> 
> But i can't help you out as long as you don't tell me whats going on
> over there.
> 
>> The /tmp/vzlogger.log file does not exists (just after a reboot), so nothing there....
> 
> So, you're not using the configuration i told you earlier.
> In your config are some flaws, even if not related to the actual
> problem.
> 
>> The /var/log/vzlogger.log is as follows (just after a reboot):
> 
> What does "just after a reboot" mean? I'm confused because you're
> using it in both sentences.
> 
>> [Sep 15 14:34:57][mtr3] Reading: id=Power/StringItentifier: value=832.95 ts=1473942897608
> [...]
> 
> You cut it very short. I like to see the part right after start of
> vzlogger to check for errors at startup.
> 
> 
> mfg Daniel
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://demo.volkszaehler.org/pipermail/volkszaehler-users/attachments/20160915/5a466272/attachment-0001.html>