[vz-users] New user, can't even get the basics working....

[fiets fietsenwiel]

I now found out that when I give the command: gpio mode 0 up GPIO 17 also
works.
I think that will go for all GPIO's with default value 0.

The question is why the GPIO's have default value 0 (the pi internal
pulldown restistor is active instead of pullup resistor) and some don't.

I don't try this with an other image anymore, this already costed me to
much time. I am glad it works now....

All, thanks!

2016-09-21 12:31 GMT+02:00 Andreas Götz <cpuidle at gmail.com>:

> Retry same test with different image and different pi.
>
> Viele Grüße,
> Andreas
>
> Am 21.09.2016 um 11:40 schrieb fiets fietsenwiel <fietsenwiel at gmail.com>:
>
> Ok, things getting more clear....,
>
> I tried several gpio's.
> GPIO 4, 24 and 25 works.
> Gpio 17 and GPIO 22 don't.
>
> Now I stopped vzlogger and disconnected the wires on the GPIO's on the
> Raspberry.
>
> I gave the following commands and then I put, with a wire, the
> corresponding GPIO pin to the ground:
>
> For GPIO 4 -   command: gpio wfi 7 falling      result was positive, so
> this works...
> For GPIO 17 - command: gpio wfi 0 falling       result was negative, the
> commands kept waiting for a folling edge
> For GPIO 22 - command: gpio wfi 3 falling       result was negative, the
> commands kept waiting for a folling edge
> For GPIO 18 - command: gpio wfi 1 falling       result was negative, the
> commands kept waiting for a folling edge
> and so on for all GPIO's
>
> I can't find any other GPIO except 4, 24 and 25 where the result is
> positive.
>
> So the problem is not Volkszaehler, vzlogger was stopped. But maybe it is
> the SD-image because the problem occurs on two different Raspberry pi's?
>
> I'll try with an onther image....
>
> Has anyone have an idea how to solve this?
>
> Thanks in advance...
>
> 2016-09-20 19:25 GMT+02:00 Daniel Lauckner <vz at jahp.de>:
>
>> Hallo,
>>
>>
>> am Dienstag, 20. September 2016 um 08:53 hast du geschrieben:
>> > Still GPIO 17 in the configfile does not work...
>>
>> Last time GPIO 22 didn't work.
>>
>> >> Energie gebruik            "uuid":
>> >> "dd995220-7a47-11e6-86ce-6bf65a52ce09", GPIO 4   Works
>> >> Energie opbrengst          "uuid":
>> >> "dfc58710-7a47-11e6-9278-45f4e725fa39", GPIO 22  Does not work
>>
>>
>> mfg Daniel
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://demo.volkszaehler.org/pipermail/volkszaehler-users/attachments/20160921/5238aa8f/attachment-0001.html>