[vz-users] manuelle wertuebergabe

Frank Richter frank.richter83 at gmail.com
Sat Dec 9 19:43:44 CET 2017


Du musst den identifier ändern, 1.8.1 statt 1.8.0.

Am 09.12.2017 19:38 schrieb "Wolfram Daniel" <d.wolfram at tu-braunschweig.de>:

ich hab jetzt zwischenstücke aus dem log ausgeschnitten, die sich meinem
Anschein nach wiederholen. dabei anzumerken ist, dass die ersten beiden
zeilen die sind, die sich stark wiederholen, da steht manchmal seitenweise
nichts anderes...ich hoffe es hilft weiter und nochmal großes DANKE dass
du/ihr euch die Zeit nehmt, mir zu helfen

[Dec 09 19:24:24][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:24:24][d0]   Too much data for obis_code (byte=0x0)
[Dec 09 19:24:24][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:24:24][d0]   Too much data for obis_code (byte=0x0)
[Dec 09 19:24:39][d0]   nothing received for more than 10 seconds
[Dec 09 19:24:39][d0]   read timed out!, context: 6, bytes read: 16, last
byte 0x0
[Dec 09 19:24:39][mtr0] Got 0 new readings from meter:
[Dec 09 19:24:39][chn0] ==> number of tuples: 0
[Dec 09 19:24:39][chn0] JSON request body is null. Nothing to send now.
[Dec 09 19:24:39][d0]   sending pullsequenz send (len:5 is:5).
[Dec 09 19:24:40][d0]   Pull answer (vendor=ISk, baudrate=5,
identification=MT174-0001)
[Dec 09 19:24:40][d0]   Sending ack sequence send (len:6 is:6,^F050
).
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte ^F hex= 6
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 0 hex= 30
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 5 hex= 35
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 0 hex= 30
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte ^M hex= D

[..]
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= 1 hex= 31
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= B hex= 42
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= ) hex= 29
[Dec 09 19:24:40][d0]   Parsed reading (OBIS code=0-0:C.1.6*255,
value=391B, unit=)
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte ^M hex= D
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte
 hex= A
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 1 hex= 31
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte - hex= 2D
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 0 hex= 30
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte : hex= 3A
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 1 hex= 31
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte . hex= 2E
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 8 hex= 38
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte . hex= 2E
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 1 hex= 31
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte * hex= 2A
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 2 hex= 32
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 5 hex= 35
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 5 hex= 35

[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte ( hex= 28
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= 0 hex= 30
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= 0 hex= 30
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= 0 hex= 30
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= 2 hex= 32
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= 0 hex= 30
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= 7 hex= 37
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= 1 hex= 31
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= . hex= 2e
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= 2 hex= 32
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= 1 hex= 31
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= 0 hex= 30
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= * hex= 2a
[Dec 09 19:24:40][d0]   Parsed reading (OBIS code=1-0:1.8.1*255,
value=0002071.210, unit=kWh)
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte ^M hex= D
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte
 hex= A
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 1 hex= 31
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte - hex= 2D
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 0 hex= 30
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte : hex= 3A
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 2 hex= 32
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte . hex= 2E
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 8 hex= 38
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte . hex= 2E
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 1 hex= 31
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte * hex= 2A
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 2 hex= 32
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 5 hex= 35
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 5 hex= 35
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte ( hex= 28
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= 0 hex= 30
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= 0 hex= 30
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= 0 hex= 30
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= 7 hex= 37
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= * hex= 2a
[Dec 09 19:24:40][d0]   Parsed reading (OBIS code=1-0:2.8.1*255,
value=0001091.507, unit=kWh)
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte ^M hex= D
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte
 hex= A
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 0 hex= 30
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte - hex= 2D
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 0 hex= 30
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte : hex= 3A
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte F hex= 46
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte . hex= 2E
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte F hex= 46
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte . hex= 2E
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 0 hex= 30
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte * hex= 2A
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 2 hex= 32
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 5 hex= 35
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte 5 hex= 35
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte ( hex= 28
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= 0 hex= 30
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= 0 hex= 30
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= 0 hex= 30
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= 0 hex= 30
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= 0 hex= 30
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= 0 hex= 30
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= 0 hex= 30
[Dec 09 19:24:40][d0]   DEBUG VALUE byte= ) hex= 29
[Dec 09 19:24:40][d0]   Parsed reading (OBIS code=0-0:F.F.0*255,
value=0000000, unit=)
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte ^M hex= D
[Dec 09 19:24:40][d0]   DEBUG OBIS_CODE byte
 hex= A
[Dec 09 19:24:40][d0]   Read package with 7 tuples (vendor=ISk, baudrate=5,
identification=MT174-0001)
[Dec 09 19:24:40][mtr0] Got 7 new readings from meter:
[Dec 09 19:24:40][mtr0] Reading: id=1-0:0.0.1*255/ObisIdentifier:1-0:0.0.1*255
value=1.00 ts=1512843880723
[Dec 09 19:24:40][mtr0] Reading: id=1-0:0.2.0*255/ObisIdentifier:1-0:0.2.0*255
value=1.06 ts=1512843880745
[Dec 09 19:24:40][mtr0] Reading:
id=0-0:96.1.0*255/ObisIdentifier:0-0:96.1.0*255
value=67513323.00 ts=1512843880770
[Dec 09 19:24:40][mtr0] Reading:
id=0-0:96.1.6*255/ObisIdentifier:0-0:96.1.6*255
value=391.00 ts=1512843880792
[Dec 09 19:24:40][mtr0] Reading: id=1-0:1.8.1*255/ObisIdentifier:1-0:1.8.1*255
value=2071.21 ts=1512843880825
[Dec 09 19:24:40][mtr0] Reading: id=1-0:2.8.1*255/ObisIdentifier:1-0:2.8.1*255
value=1091.51 ts=1512843880859
[Dec 09 19:24:40][mtr0] Reading:
id=0-0:97.97.0*255/ObisIdentifier:0-0:97.97.0*255
value=0.00 ts=1512843880884
[Dec 09 19:24:40][chn0] ==> number of tuples: 0
[Dec 09 19:24:40][chn0] JSON request body is null. Nothing to send now.
[Dec 09 19:24:40][d0]   sending pullsequenz send (len:5 is:5).
[Dec 09 19:24:41][d0]   Pull answer (vendor=ISk, baudrate=5,
identification=MT174-0001)
[Dec 09 19:24:41][d0]   Sending ack sequence send (len:6 is:6,^F050
).
[Dec 09 19:24:41][d0]   DEBUG OBIS_CODE byte ^F hex= 6
[Dec 09 19:24:41][d0]   DEBUG OBIS_CODE byte 0 hex= 30
[Dec 09 19:24:41][d0]   DEBUG OBIS_CODE byte 5 hex= 35
[Dec 09 19:24:41][d0]   DEBUG OBIS_CODE byte 0 hex= 30
[Dec 09 19:24:41][d0]   DEBUG OBIS_CODE byte ^M hex= D
[Dec 09 19:24:41][d0]   DEBUG OBIS_CODE byte
 hex= A
[Dec 09 19:24:43][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:24:43][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:24:43][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:24:43][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:24:43][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:24:43][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:24:43][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:24:43][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:24:43][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:24:43][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:24:43][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:24:43][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:24:43][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:24:43][d0]   Too much data for obis_code (byte=0x0)
[Dec 09 19:24:44][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:24:44][d0]   Too much data for obis_code (byte=0x0)
[Dec 09 19:24:44][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[..]
[Dec 09 19:24:51][d0]   Too much data for obis_code (byte=0x0)
[Dec 09 19:24:51][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:24:51][d0]   Too much data for obis_code (byte=0x0)
[Dec 09 19:25:06][d0]   nothing received for more than 10 seconds
[Dec 09 19:25:06][d0]   read timed out!, context: 6, bytes read: 16, last
byte 0x0
[Dec 09 19:25:06][mtr0] Got 0 new readings from meter:
[Dec 09 19:25:06][chn0] ==> number of tuples: 0
[Dec 09 19:25:06][chn0] JSON request body is null. Nothing to send now.
[Dec 09 19:25:06][d0]   sending pullsequenz send (len:5 is:5).
[Dec 09 19:25:06][d0]   Pull answer (vendor=ISk, baudrate=5,
identification=MT174-0001)
[Dec 09 19:25:07][d0]   Sending ack sequence send (len:6 is:6,^F050
).
[Dec 09 19:25:07][d0]   DEBUG OBIS_CODE byte ^F hex= 6
[Dec 09 19:25:07][d0]   DEBUG OBIS_CODE byte 0 hex= 30
[Dec 09 19:25:07][d0]   DEBUG OBIS_CODE byte 5 hex= 35
[Dec 09 19:25:07][d0]   DEBUG OBIS_CODE byte 0 hex= 30
[Dec 09 19:25:07][d0]   DEBUG OBIS_CODE byte ^M hex= D
[Dec 09 19:25:07][d0]   DEBUG OBIS_CODE byte a hex= 61
[Dec 09 19:25:09][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:25:09][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:25:09][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:25:09][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:25:09][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:25:09][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:25:09][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:25:09][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:25:09][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:25:09][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:25:09][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:25:09][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:25:09][d0]   Too much data for obis_code (byte=0x0)
[Dec 09 19:25:09][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 19:25:09][d0]   Too much data for obis_code (byte=0x0)
[Dec 09 19:25:09][d0]   DEBUG OBIS_CODE byte ^@ hex= 0



On Sat, 9 Dec 2017 19:16:00 +0100
 Frank Richter <frank.richter83 at gmail.com> wrote:

> Das Logfile hört da auf wo es interessant wird, ein bisschen mehr brauchen
> wir schon.
>
> Gruß
> Frank
>
> Am 09.12.2017 18:51 schrieb "Wolfram Daniel" <d.wolfram at tu-braunschweig.de
> >:
>
> hey,
>> auch dir erstmal danke für die Hilfe.
>> vzlogger läuft jetzt, aber leider immernoch "nothing to plot..."
>>
>> logfile:
>> [Dec 09 18:47:37][main] vzlogger v0.6.1 based on
>> heads/master-0-gddc24a5d5c from Wed, 5 Apr 2017 05:19:12 +0200 started.
>> [Dec 09 18:47:37][mtr0] Creating new meter with protocol d0.
>> [Dec 09 18:47:37][d0]   pullseq len:5 found
>> [Dec 09 18:47:37][d0]   ackseq len:6 found ^F050
>> , 6
>> [Dec 09 18:47:37][mtr0] Meter configured, enabled.
>> [Dec 09 18:47:37]       New meter initialized (protocol=d0)
>> [Dec 09 18:47:37]       Configure channel.
>> [Dec 09 18:47:37][chn0] New channel initialized (uuid=...736c26
>> api=volkszaehler id=1.8.0)
>> [Dec 09 18:47:37]       Have 1 meters.
>> [Dec 09 18:47:37][main] log level is 15
>> [Dec 09 18:47:37][main] daemon=1, local=0
>> [Dec 09 18:47:37]       Daemonize process...
>> [Dec 09 18:47:37]       Opened logfile /var/log/vzlogger.log
>> [Dec 09 18:47:37][push] No pushDataServer defined.
>> [Dec 09 18:47:37][]     ===> Start meters
>> [Dec 09 18:47:37][mtr0] Meter connection established
>> [Dec 09 18:47:37][mtr0] Meter thread started
>> [Dec 09 18:47:37][mtr0] Meter is opened. Starting channels.
>> [Dec 09 18:47:37][chn0] Logging thread started
>> [Dec 09 18:47:37][]     Startup done.
>> [Dec 09 18:47:37][mtr0] Number of readers: 400
>> [Dec 09 18:47:37][mtr0] Config.daemon: 1
>> [Dec 09 18:47:37][mtr0] Config.local: 0
>> [Dec 09 18:47:37][d0]   sending pullsequenz send (len:5 is:5).
>> [Dec 09 18:47:37][chn0] Start logging thread for volkszaehler-api. Running
>> as daemon: yes
>> [Dec 09 18:47:37][chn0] Using default volkszaehler api.
>> [Dec 09 18:47:38][d0]   Pull answer (vendor=ISk, baudrate=5,
>> identification=MT174-0001)
>> [Dec 09 18:47:38][d0]   Sending ack sequence send (len:6 is:6,^F050
>> ).
>> [Dec 09 18:47:38][d0]   DEBUG OBIS_CODE byte ^F hex= 6
>> [Dec 09 18:47:38][d0]   DEBUG OBIS_CODE byte 0 hex= 30
>> [Dec 09 18:47:38][d0]   DEBUG OBIS_CODE byte 5 hex= 35
>> [Dec 09 18:47:38][d0]   DEBUG OBIS_CODE byte 0 hex= 30
>> [Dec 09 18:47:38][d0]   DEBUG OBIS_CODE byte ^M hex= D
>> [Dec 09 18:47:38][d0]   DEBUG OBIS_CODE byte
>>  hex= A
>> [Dec 09 18:47:40][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
>> [Dec 09 18:47:40][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
>>
>>
>>
>> On Sat, 9 Dec 2017 18:40:14 +0100
>>  Udo1 <udo1 at gmx.net> wrote:
>>
>> Moin,
>>>
>>> Am 09.12.2017 um 18:25 schrieb Wolfram Daniel:
>>>
>>> Active: failed (Result: exit-code)
>>>>
>>>>
>>> vzloger ist abgestürzt. vzlogger.conf fehlerhaft.
>>>
>>> Drauf achten, dass am Ende der Datei kein Leerzeichen/Leerzeile ist.
>>> Editieren NUR mit nano.
>>>
>>> Gruß
>>> Udo
>>>
>>>
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://demo.volkszaehler.org/pipermail/volkszaehler-users/attachments/20171209/5ab99b7d/attachment-0001.html>


More information about the volkszaehler-users mailing list