[vz-users] Elster AS1440 - vzlogger.conf

[Jörg Hildering]

Danke Udo,

hatte das mit einem Online Umrechner umrechnen lassen.
Hab jetzt mal deine Werte genommen und auch mal die führende 0 weg
gelassen. Funktioniert leider immer noch nicht.

[Jan 16 21:29:43][d0]   nothing received for more than 100 seconds

[Jan 16 21:29:43][d0]   read timed out!, context: 6, bytes read: 0, last
byte 0$

[Jan 16 21:29:43][mtr0] Got 0 new readings from meter:

[Jan 16 21:29:43][chn0] ==> number of tuples: 0

[Jan 16 21:29:43][chn0] JSON request body is null. Nothing to send now.

[Jan 16 21:29:43][chn1] ==> number of tuples: 0

[Jan 16 21:29:43][chn1] JSON request body is null. Nothing to send now.

[Jan 16 21:29:43][chn2] ==> number of tuples: 0

[Jan 16 21:29:43][chn2] JSON request body is null. Nothing to send now.

[Jan 16 21:29:43][chn3] ==> number of tuples: 0

[Jan 16 21:29:43][chn3] JSON request body is null. Nothing to send now.


Gruß,

Jörg

2017-01-16 21:10 GMT+01:00 Jörg Hildering <joerghildering at gmail.com>:

> Habe das jetzt wie von Udo beschrieben (Danke dafür) eingebaut. Sieht dann
> so aus:
>
> "protocol": "d0",
>
>       "device": "/dev/lesekopf0",
>
>       "dump_file": "/home/pi/logger-dump-USB0",
>
>       "pullseq": "2f 3f 3d 87 7d 21 43 52 2F 0d 0a",
>
>       "ackseq": "063035300d0a",
>
>       "baudrate": 300,
>
>       "baudrate_read": 9600,
>
>       "baudrate_change_delay": 100,
>
>       "parity": "7e1",
>
>       "read_timeout": 100
>
> und
>
> "protocol": "d0",
>
>       "device": "/dev/lesekopf1",
>
>       "dump_file": "/home/pi/logger-dump-USB1",
>
>       "pullseq": "2f 3f 3D 87 7D 21 43 52 2F 0d 0a",
>
>       "ackseq": "063035300d0a",
>
>       "baudrate": 300,
>
>       "baudrate_read": 9600,
>
>       "baudrate_change_delay": 100,
>
>       "parity": "7e1",
>
>       "read_timeout": 100
>
>
> Beim Ersten war das 04032381 <040%2032381>
>
> beim zweiten 04032390 <040%2032390>
>
>
>
> Funktioniert leider noch nicht :-(
>
> [Jan 16 21:02:50][d0]   Pull answer (vendor=ELS, baudrate=5,
> identification=\@V$
>
> [Jan 16 21:02:50][d0]   Sending ack sequence send (len:6 is:6,^F050
>
> ).
>
> [Jan 16 21:03:24][d0]   nothing received for more than 100 seconds
>
> [Jan 16 21:03:24][d0]   read timed out!, context: 6, bytes read: 0, last
> byte 0$
>
> [Jan 16 21:03:24][mtr0] Got 0 new readings from meter:
>
> [Jan 16 21:03:24][chn0] ==> number of tuples: 0
>
> [Jan 16 21:03:24][chn0] JSON request body is null. Nothing to send now.
>
> [Jan 16 21:03:24][chn1] ==> number of tuples: 0
>
> [Jan 16 21:03:24][chn1] JSON request body is null. Nothing to send now.
>
> [Jan 16 21:03:24][chn2] ==> number of tuples: 0
>
> [Jan 16 21:03:24][chn2] JSON request body is null. Nothing to send now.
>
> [Jan 16 21:03:24][chn3] ==> number of tuples: 0
>
> [Jan 16 21:03:24][chn3] JSON request body is null. Nothing to send now.
>
> [Jan 16 21:03:24][d0]   sending pullsequenz send (len:5 is:5).
>
> [Jan 16 21:03:25][d0]   Pull answer (vendor=ELS, baudrate=5,
> identification=\@V$
>
> [Jan 16 21:03:25][d0]   Sending ack sequence send (len:6 is:6,^F050
>
> ).
>
>
>
> Gruß
>
> Jörg
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://demo.volkszaehler.org/pipermail/volkszaehler-users/attachments/20170116/fc50dcf1/attachment-0001.html>