[vz-users] ISKRA MT174 keine Zählerwerte
Sven Börner
svenboerner at freenet.de
Sun Apr 21 10:05:59 CEST 2019
Hallo Frank,
"ackseq": „auto“ funktioniert leider auch nicht. Habe in einem Forum den Hinweis gefunden, diese Zeile auszukommentieren -> jetzt läuft’s, wenn auch noch nicht stabil.
österliche Grüße
Sven
> Am 20.04.2019 um 12:17 schrieb Frank Richter <frank.richter83 at gmail.com>:
>
> Hallo Sven,
>
> da klappt wohl die Baudraten-Umschaltung nicht, die bei deinem manuellen Versuch gar nicht stattfindet.
>
> Probier mal alternativ "ackseq": "auto".
>
> Grüße
> Frank
>
> Sven Börner <svenboerner at freenet.de <mailto:svenboerner at freenet.de>> schrieb am Sa., 20. Apr. 2019, 11:35:
> Hallo zusammen,
> ich habe einen 2-Richtungszähler ISKRA MT174-D1A52-G22-M3K0. Zum Auslesen des D0-Protokoll’s nutze ich einen Volkszähler-Lesekopf RS232 mit USB/RS232 Adapter an einem RPi Model B Rev 2. Den Lesekopf habe ich mit einem PC getestet. Das Volkszähler Image habe ich auf dem RPi installiert, die vzlogger.conf wie folgt angepasst:
>
> {
> "retry": 0,
> "daemon": true,
> "verbosity": 15,
> "log": "/var/log/vzlogger.log",
> "local": {
> "enabled": false,
> "port": 8080,
> "index": true,
> "timeout": 0,
> "buffer": 0
> },
> "meters": [
> {
> "enabled": true,
> "allowskip": false,
> "interval": -1,
> "aggtime": -1,
> "aggfixedinterval": false,
> "channels": [
> {
> "api": "volkszaehler",
> "uuid": "fd06aec0-61a2-11e9-9086-b93124937ae5",
> "identifier": "1-0:1.8.1",
> "middleware": "http://localhost/middleware.php <http://localhost/middleware.php>",
> "aggmode": "none",
> "duplicates": 0
> }
> ],
> "protocol": "d0",
> "device": "/dev/ttyUSB0",
> "dump_file": "/var/log/d0-dump.txt",
> "pullseq": "2F3F210D0A",
> "ackseq": "063035300d0a",
> "baudrate": 300,
> "baudrate_read": 9600,
> "parity": "7e1",
> "wait_sync": "off",
> "read_timeout": 10,
> "baudrate_change_delay": 0
> }
> ]
> }
>
>
> und diesen Kanal angelegt:
>
>
> Leider bekomme ich keine Werte angezeigt.
>
> Die vzlogger.log sieht wie folgt aus:
>
> [Apr 18 08:39:13][main] vzlogger v0.7.0 based on heads/master-0-gc567220a06 from Sun, 14 Apr 2019 10:25:20 +0200 started.
> [Apr 18 08:39:13][mtr0] Creating new meter with protocol d0.
> [Apr 18 08:39:13][d0] pullseq len:5 found
> [Apr 18 08:39:13][d0] ackseq len:6 found ^F050
> , 6
> [Apr 18 08:39:13][mtr0] Meter configured, enabled.
> [Apr 18 08:39:13] New meter initialized (protocol=d0)
> [Apr 18 08:39:13] Configure channel.
> [Apr 18 08:39:13][chn0] New channel initialized (uuid=...937ae5 api=volkszaehler id=1-0:1.8.1)
> [Apr 18 08:39:13] Have 1 meters.
> [Apr 18 08:39:13][main] log level is 15
> [Apr 18 08:39:14][main] daemon=1, local=0
> [Apr 18 08:39:14] Daemonize process...
> [Apr 18 08:39:14] Opened logfile /var/log/vzlogger.log
> [Apr 18 08:39:14][push] No pushDataServer defined.
> [Apr 18 08:39:14][] ===> Start meters
> [Apr 18 08:39:14][mtr0] Meter connection established
> [Apr 18 08:39:14][mtr0] Meter thread started
> [Apr 18 08:39:14][mtr0] Meter is opened. Starting channels.
> [Apr 18 08:39:14][chn0] Start logging thread for volkszaehler-api. Running as daemon: yes
> [Apr 18 08:39:14][chn0] Logging thread started
> [Apr 18 08:39:14][] Startup done.
> [Apr 18 08:39:14][mtr0] Number of readers: 400
> [Apr 18 08:39:14][mtr0] Config.daemon: 1
> [Apr 18 08:39:14][mtr0] Config.local: 0
> [Apr 18 08:39:14][chn0] Using default volkszaehler api.
> [Apr 18 08:39:14][d0] sending pullsequenz send (len:5 is:5).
> [Apr 18 08:39:15][d0] Pull answer (vendor=ISk, baudrate=5, identification=MT174-0001)
> [Apr 18 08:39:15][d0] Sending ack sequence send (len:6 is:6,^F050
> ).
> [Apr 18 08:39:15][d0] DEBUG OBIS_CODE byte ^F hex= 6
> [Apr 18 08:39:15][d0] DEBUG OBIS_CODE byte 0 hex= 30
> [Apr 18 08:39:15][d0] DEBUG OBIS_CODE byte 5 hex= 35
> [Apr 18 08:39:15][d0] DEBUG OBIS_CODE byte 0 hex= 30
> [Apr 18 08:39:15][d0] DEBUG OBIS_CODE byte
> hex= A
> [Apr 18 08:39:15][d0] DEBUG OBIS_CODE byte
> hex= A
> [Apr 18 08:39:17][d0] DEBUG OBIS_CODE byte ^@ hex= 0
> [Apr 18 08:39:17][d0] DEBUG OBIS_CODE byte ^@ hex= 0
> [Apr 18 08:39:17][d0] DEBUG OBIS_CODE byte ^@ hex= 0
> [Apr 18 08:39:17][d0] DEBUG OBIS_CODE byte ^@ hex= 0
> [Apr 18 08:39:17][d0] DEBUG OBIS_CODE byte ^@ hex= 0
> [Apr 18 08:39:17][d0] DEBUG OBIS_CODE byte ^@ hex= 0
> [Apr 18 08:39:17][d0] DEBUG OBIS_CODE byte ^@ hex= 0
> [Apr 18 08:39:17][d0] DEBUG OBIS_CODE byte ^@ hex= 0
> [Apr 18 08:39:17][d0] DEBUG OBIS_CODE byte ^@ hex= 0
> [Apr 18 08:39:17][d0] DEBUG OBIS_CODE byte ^@ hex= 0
> [Apr 18 08:39:17][d0] DEBUG OBIS_CODE byte ^@ hex= 0
> [Apr 18 08:39:17][d0] DEBUG OBIS_CODE byte ^@ hex= 0
> [Apr 18 08:39:17][d0] DEBUG OBIS_CODE byte ^@ hex= 0
> [Apr 18 08:39:17][d0] Too much data for obis_code (byte=0x0)
> [Apr 18 08:39:17][d0] DEBUG OBIS_CODE byte ^@ hex= 0
> [Apr 18 08:39:17][d0] Too much data for obis_code (byte=0x0)
> [Apr 18 08:39:17][d0] DEBUG OBIS_CODE byte ^@ hex= 0
> [Apr 18 08:39:17][d0] Too much data for obis_code (byte=0x0)
> [Apr 18 08:39:17][d0] DEBUG OBIS_CODE byte ^@ hex= 0
> [Apr 18 08:39:17][d0] Too much data for obis_code (byte=0x0)
> [Apr 18 08:39:17][d0] DEBUG OBIS_CODE byte ^@ hex= 0
> [Apr 18 08:39:17][d0] Too much data for obis_code (byte=0x0)
> [Apr 18 08:39:17][d0] DEBUG OBIS_CODE byte ^@ hex= 0
> [Apr 18 08:39:17][d0] Too much data for obis_code (byte=0x0)
> [Apr 18 08:39:17][d0] DEBUG OBIS_CODE byte ^@ hex= 0
> [Apr 18 08:39:17][d0] Too much data for obis_code (byte=0x0)
> [Apr 18 08:39:17][d0] DEBUG OBIS_CODE byte ^@ hex= 0
> [Apr 18 08:39:17][d0] Too much data for obis_code (byte=0x0)
> [Apr 18 08:39:17][d0] DEBUG OBIS_CODE byte ^@ hex= 0
> [Apr 18 08:39:17][d0] Too much data for obis_code (byte=0x0)
>
> Die d0-dump.txt zeigt folgende Einträge:
>
> ##### 53.559669000s ( 0 ms) opened
> ##### 53.644028000s ( 85 ms) read
> ##### 53.644167000s ( 0 ms) TCIOFLUSH and cfsetiospeed
> <<<<< 53.681746000s ( 37 ms)
> 2f 3f 21 0d 0a /?!
>
> >>>>> 53.714185000s ( 33 ms)
> 2f 3f 21 0a 0a 2f 49 53 6b 35 4d 54 31 37 34 2d /?! /ISk5MT174-
> 30 30 30 31 0a 0a 0001
>
> <<<<< 54.469668000s ( 755 ms)
> 06 30 35 30 0d 0a 050
>
> ##### 54.472073000s ( 3 ms) tcdrain cfsetispeed
> >>>>> 54.474130000s ( 2 ms)
> 06 30 35 30 0a 0a 00 00 00 00 00 00 00 00 00 00 050
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00
>
> ##### 78.796010000s ( 24322 ms) timeout!
> ##### 78.884943000s ( 88 ms) read
> ##### 78.885139000s ( 1 ms) TCIOFLUSH and cfsetiospeed
> <<<<< 78.889643000s ( 4 ms)
> 2f 3f 21 0d 0a /?!
>
> >>>>> 78.923351000s ( 34 ms)
> 2f 3f 21 0a 0a 2f 49 53 6b 35 4d 54 31 37 34 2d /?! /ISk5MT174-
> 30 30 30 31 0a 0a 0001
>
> <<<<< 79.675494000s ( 752 ms)
> 06 30 35 30 0d 0a 050
>
> ##### 79.678226000s ( 3 ms) tcdrain cfsetispeed
> >>>>> 79.679076000s ( 1 ms)
> 06 30 35 30 0a 0a 00 00 00 00 00 00 00 00 00 00 050
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00
>
> ##### 3.946208000s ( 24267 ms) timeout!
> ##### 3.963207000s ( 17 ms) read
> ##### 3.963415000s ( 0 ms) TCIOFLUSH and cfsetiospeed
> <<<<< 3.967309000s ( 4 ms)
> 2f 3f 21 0d 0a /?!
>
> >>>>> 3.999970000s ( 32 ms)
> 2f 3f 21 0a 0a 2f 49 53 6b 35 4d 54 31 37 34 2d /?! /ISk5MT174-
> 30 30 30 31 0a 0a 0001
>
> <<<<< 4.753585000s ( 754 ms)
> 06 30 35 30 0d 0a 050
>
> ##### 4.755643000s ( 2 ms) tcdrain cfsetispeed
> >>>>> 4.756876000s ( 1 ms)
> 06 30 35 30 0a 0a 00 00 00 00 00 00 00 00 00 00 050
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> Wenn ich den Zähler direkt über die Konsole abfrage, erhalte ich die aktuellen Werte:
>
> pi at raspberrypi:~ $ stty -F /dev/ttyUSB0 1:0:9a7:0:3:1c:7f:15:4:5:1:0:11:13:1a:0:12:f:17:16:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0
> stty: /dev/ttyUSB0: unable to perform all requested operations
> pi at raspberrypi:~ $ cat < /dev/ttyUSB0 &
> [1] 1065
> pi at raspberrypi:~ $ echo -n -e '\x2F\x3F\x21\x0D\x0A' > /dev/ttyUSB0
> pi at raspberrypi:~ $ /?!
> /ISk5MT174-0001
> 1-0:0.0.0*255(440703-7281232)
> 1-0:0.0.1*255(00000000)
> 1-0:0.2.0*255(1.01)
> 0-0:C.1.0*255(62292994)
> 0-0:C.1.6*255(724F)
> 1-0:1.8.1*255(0041262.335*kWh)
> 1-0:2.8.1*255(0011209.241*kWh)
> 0-0:F.F.0*255(0000000)
> !
> n
>
> Wer kann mir weiterhelfen? Zählerkopf und Schnittstelle kommunizieren augenscheinlich.
>
> Vielen Dank und frohe Ostern.
>
> Sven
> Sven Börner
> svenboerner at freenet.de <mailto:svenboerner at freenet.de>
>
>
>
>
> <Bildschirmfoto 2019-04-18 um 08.48.10.png>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://demo.volkszaehler.org/pipermail/volkszaehler-users/attachments/20190421/7f7d4d5f/attachment-0001.html>
More information about the volkszaehler-users
mailing list