[vz-users] Hilfe bei Zählerwechsel und alte Volkszähler-Hardware
Thomas Höpfner
thomas at thhoe.de
Sat May 4 20:43:18 CEST 2019
Soweit habe ich dich schon verstanden.
Aber was funktioniert nicht?
Das erstellen der Firmware?
Die Übertragung?
Wo kommt die von dir beschriebenen Meldung her?
Wie ist die ursprüngliche Firmware erstellt worden, und wie kam sie auf den Y-Port?
Thomas
Am 04.05.2019 um 18:56 schrieb Marcus Wilkens <marcus.wilkens at scharrendorf.de>:
Wie in meiner ersten Mail geschrieben hat sich durch einen Zählerwechsel die Schnittstelle geändert.
Vorher 300Baud 7E1 jetzt 9600 8N1.
Hierfür muss die Formware neu erstellt und auf den Y-Port geflasht werden.
in der Kürze liegt die Würze ...
-------- Ursprüngliche Nachricht --------
Von: Thomas Höpfner <thomas at thhoe.de>
Datum: 04.05.19 16:13 (GMT+01:00)
An: "volkszaehler.org <http://volkszaehler.org> - users" <volkszaehler-users at demo.volkszaehler.org>
Betreff: Re: [vz-users] Hilfe bei Zählerwechsel und alte Volkszähler-Hardware
Ich verstehe nicht ganz was bei dir nicht geht.
Du schreibst Zählerwechsel, wie ist der alte in Betrieb gegangen?
Thomas
Am 03.05.2019 um 18:17 schrieb Marcus Wilkens <marcus.wilkens at scharrendorf.de>:
Hallo Forenteilnehmer,
ich bin mir nicht ganz sicher ob ich mich irgendwie falsch verhalten habe aber ist es normal das hier keiner antwortet?
Sofern meine Hardware zu alt ist und man sich nur mit aktueller Hardware beschäftigen möchte wäre das auch OK ... sofern man mir es mitteilt.
Am 14.04.2019 um 10:39 schrieb Marcus Wilkens:
Hallo liebes Support-Team,
ich habe ein Anliegen und hoffe das es nicht zu frech wirkt.
Mein Bekannter und ich betreiben seit mehreren Jahren ein YPORT-Node mit YPORT-Node S0-Erweiterung ohne Beanstandungen (Configs weiter unten) ... hierfür noch einmal ein Lob an alle Projektbeteiligten.
Durch einen Zählerwechsel von Itron ACE3000 Type 260 auf Logarex LK13BE803039 haben sich nun die beiden Schnittstellen (Y und ZPORT) geändert. Auf beiden Ports wird nun 9600 8N1 gesprochen.
Alle Versuche, mit meinen laienhaften Linux Kenntnissen eine neue Firmware zu erstellen, scheiterten. Selbst der UP- und DOWNLOAD mit TFTPD64 (Crossoverkabel) enden bei Block 0.
Meine Frage ... könnt ihr mir die passende Firmware zur Verfügung stellen? Gerne komme ich für anfallende Kosten auf.
Tschö ... Marcus Wilkens
Config-Wilkens
CONFIG_EXPERIMENTAL=y CONFIG_EXPERT=y ARCH=ARCH_AVR ARCH_AVR=y
MCU=atmega1284p atmega1284p=y FREQ=12500000
HARDWARE=user_Volkszaehler_YPORT_Node user_Volkszaehler_YPORT_Node=y
BOOTLOADER_START_ADDRESS=0x1e000 BOOTLOADER_JUMP=y
BOOTLOADER_WORDS=4096 VERSION_STRING_CHOICE=USE_RELEASE_VERSION
USE_RELEASE_VERSION=y VERSION_GIT="835b972" DEBUG_BAUDRATE=115200
VFS_SUPPORT=y VFS_INLINE_SUPPORT=y CONFIG_INLINE_SUPPORT=y
VFS_CONFIG_INLINE_SUPPORT=y VFS_INLINE_INLINESVG_SUPPORT=y
VFS_INLINE_HTML_CLEAN_SUPPORT=y SD_READ_TIMEOUT=y
CONF_HOSTNAME="Wilkens_YPORT_ZPORT" NET_MAX_FRAME_LENGTH=1500
ENC28J60_SUPPORT=y CONF_ENC_MAC="ac:de:48:1c:d8:8e"
CONF_ENC_IP="192.168.178.12" CONF_ENC_IP4_NETMASK="255.255.255.0"
ETHERNET_SUPPORT=y CONF_TAP_MAC="ac:de:48:fd:0f:d0"
CONF_TAP_IP="192.168.23.244" CONF_TAP_IP4_NETMASK="255.255.255.0"
CONF_TAP_LOCALIP="192.168.23.1" CONF_RFM12_FREQ=RFM12_FREQ_433920
RFM12_FREQ_433920=y CONF_RFM12_BAUD=19200 CONF_RFM12_IP="192.168.5.1"
CONF_RFM12_IP4_NETMASK="255.255.255.0" UIP_SUPPORT=y NET_SUPPORT=y
IPV4_SUPPORT=y CONF_ETHERRAPE_GATEWAY="192.168.178.1" TCP_SUPPORT=y
UDP_SUPPORT=y BROADCAST_SUPPORT=y ICMP_SUPPORT=y DNS_SUPPORT=y
CONF_DNS_SERVER="192.168.178.1"
CONF_OPENVPN_KEY=00000000000000000000000000000000
CONF_OPENVPN_HMAC_KEY=00000000000000000000000000000000
CONF_OPENVPN_IP="0.0.0.0" CONF_OPENVPN_IP4_NETMASK="255.255.255.0"
CONF_OPENVPN_PORT=1194 PORTIO_SCHEME=PORTIO_FULL_FEATURED
PORTIO_FULL_FEATURED=y PORTIO_SUPPORT=y TTY_COLS=16 TTY_LINES=4
HC595_REGISTERS=5 HC165_REGISTERS=1 CONFIG_ADC_AREF=y ADC_REF=ADC_AREF
SMS_USART_0=y SMS_USE_USART=0 CONF_LTC1257_NUM_DEVICES=4
DC3840_USART_0=y DC3840_USE_USART=0 CONF_FS20_SERVICE="merkur"
CONF_FS20_PORT=2701 CONF_RC5_SERVER="192.168.100.3" PWM_SERVOS=1
CONF_NUM_BUTTONS= MCUF_USART_0=y MCUF_USE_USART=0
CONF_MCUF_SCROLLTEXT_STARTUP="Hi I am your ethersex ;-) "
CONF_MCUF_SCROLLTEXT_STARTUP_COLOR=240
CONF_MCUF_SCROLLTEXT_STARTUP_BG_COLOR=1
CONF_MCUF_SCROLLTEXT_STARTUP_SPEED=2
MCUF_MODUL_DISPLAY_MODE_CRON=MCUF_MODUL_DISPLAY_MODE_CRON_RANDOM
MCUF_MODUL_DISPLAY_MODE_CRON_RANDOM=y
MCUF_MODUL_DISPLAY_MODE=MCUF_MODUL_DISPLAY_MODE_RANDOM
MCUF_MODUL_DISPLAY_MODE_RANDOM=y NET_MAX_FRAME_LENGTH_GT_571=y
CONF_ARTNET_PORT=6454 CONF_ARTNET_INUNIVERSE=1
CONF_ARTNET_OUTUNIVERSE=0 DMX_OUTPUT_UNIVERSE=1 DMX_USART_0=y
DMX_USE_USART=0 ECMD_PARSER_SUPPORT=y ECMD_TCP_SUPPORT=y
ECMD_TCP_PORT=2701 FNORDLICHT_BAUDRATE=19200 CONF_FNORDLICHTER=1
CONF_HTTPLOG_SERVICE="volkszaehler.org"
CONF_HTTPLOG_PATH="/httplog/httplog.php"
CONF_HTTPLOG_UUID="12345678-9ABC-DEF0-1234-56789ABCDEF0"
HTTPLOG_BUFFER_LEN=140 CONF_IRC_IP="192.168.23.254" CONF_IRC_PORT=6667
CONF_IRC_CHANNEL="ethersex" CONF_IRC_USERNAME="ethersex"
CONF_IRC_NICKNAME="ethersex" CONF_IRC_REALNAME="Ethersex Wollmilchsau"
CONF_MYSQL_IP="192.168.23.254" CONF_MYSQL_USERNAME="root"
CONF_MYSQL_PASSWORD="password" CONF_MYSQL_SCHEMA="mavisdb"
CONF_NETSTAT_SERVICE_IP="188.40.33.175"
CONF_NETSTAT_SERVICE="ethersex.de <http://ethersex.de> " CONF_NETSTAT_API="/~habo/stat/"
CONF_SENDMAIL_IP="78.47.210.246"
CONF_SENDMAIL_FROM="root at sex.metafnord.de"
CONF_SENDMAIL_TO="stesie at brokenpipe.de"
CONF_SMS77_SERVICE="gateway.sms77.de" CONF_SMS77_USER=""
CONF_SMS77_PASS="" CONF_SMS77_TO=""
CONF_SMS77_TYPE_CHOICE=CONF_SMS77_TYPE_BASICPLUS
CONF_SMS77_TYPE_BASICPLUS=y CONF_SMS77_TYPE="basicplus"
CONF_SYSLOG_SERVER="192.168.178.91" CONF_TWITTER_SERVICE="identi.ca"
CONF_TWITTER_API="/api" CONF_TWITTER_USERNAME="ethersex"
CONF_TWITTER_PASSWORD="" CONF_TWITTER_AUTH="ZXRoZXJzZXg6"
CONF_USTREAM_IP="205.188.234.7" CONF_USTREAM_PORT=80 YPORT_SUPPORT=y
YPORT_USART_1=y YPORT_USE_USART=1 YPORT_PORT=7970 YPORT_BAUDRATE=300
YPORT_USART_MODE=YPORT_USE_7E1 YPORT_USE_7E1=y YPORT_BUFFER_LEN=511
ZPORT_SUPPORT=y ZPORT_USART_0=y ZPORT_USE_USART=0 ZPORT_PORT=7980
ZPORT_BAUDRATE=300 ZPORT_USART_MODE=ZPORT_USE_7E1 ZPORT_USE_7E1=y
ZPORT_BUFFER_LEN=511 MSR1_USART_0=y MSR1_USE_USART=0 TO1_USART_0=y
TO1_USE_USART=0 TO1_SENSOR_COUNT=1 SERIAL_LINE_LOG_TIMEOUT=20
SERIAL_LINE_LOG_EOL=0A SERIAL_LINE_LOG_COUNT=60
SERIAL_LINE_LOG_BAUDRATE=9600 NMEA_USART_0=y NMEA_USE_USART=0
UDP_STELLA_PORT=2702 UDP_IO_PORT=2703 UDP_MOTORCURTAIN_PORT=2704
CW_WPM=12 CLOCK_SUPPORT=y CLOCK_DATETIME_SUPPORT=y TZ_OFFSET=60
DST_OFFSET=60 DST_BEGIN_MONTH=3 DST_BEGIN_WEEK=5 DST_BEGIN_DOW=0
DST_BEGIN_HOUR=2 DST_END_MONTH=10 DST_END_WEEK=5 DST_END_DOW=0
DST_END_HOUR=3 CLOCK_CRYSTAL_SUPPORT=y CLOCK_NTP_ADJUST_SUPPORT=y
NTP_SUPPORT=y NTP_SERVER="ptbtime1.ptb.de" NTP_PORT=123
NTP_QUERY_INTERVAL=1800 DMX_STORAGE_UNIVERSES=2
DMX_STORAGE_CHANNELS=64 DMX_STORAGE_SLOTS=5 DMX_FXSLOT_AMOUNT=4
CONF_MOTD_DEFAULT="empty" CONF_MOTD_SIZE=50 HTTPD_SUPPORT=y
HTTPD_PORT=80 HTTPD_ALTERNATE_PORT=8000 CONF_JABBER_IP="78.47.210.246"
CONF_JABBER_HOSTNAME="jabber.zerties.org" CONF_JABBER_USERNAME="esex"
CONF_JABBER_PASSWORD="password" CONF_JABBER_RESOURCE="ethersex"
CONF_JABBER_BUDDY="stesie at jabber.zerties.org"
MOODLIGHT_CHANGEGAP_INIT=120 STELLA_FREQ=stella_normal stella_normal=y
STELLA_START=stella_start_zero stella_start_zero=y
STELLA_FADE_STEP_INIT=10 STELLA_FADE_FUNCTION_INIT=stella_fade_func_0
stella_fade_func_0=y CONF_UPNP_MULTICAST_IP="239.255.255.250"
CONF_UPNP_SCHEME_FILENAME="/ih.xml" VNC_PORT=5900
CONF_WATCHASYNC_SERVER="volkszaehler.org" CONF_WATCHASYNC_PORT=80
CONF_WATCHASYNC_METHOD="POST"
CONF_WATCHASYNC_PATH="/middleware.php/data/"
CONF_WATCHASYNC_END_PATH="000" CONF_WATCHASYNC_TIMESTAMP=y
CONF_WATCHASYNC_TIMESTAMP_PATH=".json?ts="
CONF_WATCHASYNC_RESOLUTION=1 CONF_WATCHASYNC_BUFFERSIZE=64
CONF_WATCHASYNC_PA3=y
CONF_WATCHASYNC_PA3_ID="840ae6c0-f834-4713-12c1-5117abc94f38"
CONF_WATCHASYNC_PA4=y
CONF_WATCHASYNC_PA4_ID="a4b917e5-cf83-b88f-fae9-7930b10ae24e"
CONF_WATCHASYNC_PA5=y
CONF_WATCHASYNC_PA5_ID="d43770a8-0cda-938d-f4cd-9de803c02097"
CONF_SENSOR_PSU="1015ccf501080065" CONF_SENSOR_AIR="10567cf501080006"
CONF_SENSOR_RAM="10cba7f5010800d3" CONF_LOME6_POD=0
CONF_TIME2PRESS_RESET=40 CONF_TIME2PRESS_POWER=40
CONF_TIME2PRESS_POWERL=3 FREQCOUNT_CHANNELS=1 FREQCOUNT_AVERAGE=8
USART_SUPPORT=y IPV4_SUPPORT=y # git id: commit
835b972652dd4f72d85c668599767c0331258f41 # compile date: Tue Jan 7
11:18:22 PST 2014 # gcc version: gcc version 4.5.3 (GCC) # ld version:
GNU ld (GNU Binutils) 2.20.1.20100303
Config-Döpkens
CONFIG_EXPERIMENTAL=y CONFIG_EXPERT=y ARCH=ARCH_AVR ARCH_AVR=y
MCU=atmega1284p atmega1284p=y FREQ=12500000
HARDWARE=user_Volkszaehler_YPORT_Node user_Volkszaehler_YPORT_Node=y
BOOTLOADER_START_ADDRESS=0x1e000 BOOTLOADER_JUMP=y BOOTLOADER_WORDS=4096
VERSION_STRING_CHOICE=USE_RELEASE_VERSION USE_RELEASE_VERSION=y
VERSION_GIT="835b972" DEBUG_BAUDRATE=115200 VFS_SUPPORT=y
VFS_INLINE_SUPPORT=y CONFIG_INLINE_SUPPORT=y VFS_CONFIG_INLINE_SUPPORT=y
VFS_INLINE_INLINESVG_SUPPORT=y VFS_INLINE_HTML_CLEAN_SUPPORT=y
SD_READ_TIMEOUT=y CONF_HOSTNAME="Doepkens_YPORT"
NET_MAX_FRAME_LENGTH=1500 ENC28J60_SUPPORT=y
CONF_ENC_MAC="ac:de:48:77:10:15" CONF_ENC_IP="192.168.0.15"
CONF_ENC_IP4_NETMASK="255.255.255.0" ETHERNET_SUPPORT=y
CONF_TAP_MAC="ac:de:48:fd:0f:d0" CONF_TAP_IP="192.168.23.244"
CONF_TAP_IP4_NETMASK="255.255.255.0" CONF_TAP_LOCALIP="192.168.23.1"
CONF_RFM12_FREQ=RFM12_FREQ_433920 RFM12_FREQ_433920=y
CONF_RFM12_BAUD=19200 CONF_RFM12_IP="192.168.5.1"
CONF_RFM12_IP4_NETMASK="255.255.255.0" UIP_SUPPORT=y NET_SUPPORT=y
IPV4_SUPPORT=y CONF_ETHERRAPE_GATEWAY="192.168.0.1" TCP_SUPPORT=y
UDP_SUPPORT=y BROADCAST_SUPPORT=y ICMP_SUPPORT=y DNS_SUPPORT=y
CONF_DNS_SERVER="192.168.0.1"
CONF_OPENVPN_KEY=00000000000000000000000000000000
CONF_OPENVPN_HMAC_KEY=00000000000000000000000000000000
CONF_OPENVPN_IP="0.0.0.0" CONF_OPENVPN_IP4_NETMASK="255.255.255.0"
CONF_OPENVPN_PORT=1194 PORTIO_SCHEME=PORTIO_FULL_FEATURED
PORTIO_FULL_FEATURED=y PORTIO_SUPPORT=y TTY_COLS=16 TTY_LINES=4
HC595_REGISTERS=5 HC165_REGISTERS=1 CONFIG_ADC_AREF=y ADC_REF=ADC_AREF
SMS_USART_0=y SMS_USE_USART=0 CONF_LTC1257_NUM_DEVICES=4
DC3840_USART_0=y DC3840_USE_USART=0 CONF_FS20_SERVICE="merkur"
CONF_FS20_PORT=2701 CONF_RC5_SERVER="192.168.100.3" PWM_SERVOS=1
CONF_NUM_BUTTONS= MCUF_USART_0=y MCUF_USE_USART=0
CONF_MCUF_SCROLLTEXT_STARTUP="Hi I am your ethersex ;-) "
CONF_MCUF_SCROLLTEXT_STARTUP_COLOR=240
CONF_MCUF_SCROLLTEXT_STARTUP_BG_COLOR=1
CONF_MCUF_SCROLLTEXT_STARTUP_SPEED=2
MCUF_MODUL_DISPLAY_MODE_CRON=MCUF_MODUL_DISPLAY_MODE_CRON_RANDOM
MCUF_MODUL_DISPLAY_MODE_CRON_RANDOM=y
MCUF_MODUL_DISPLAY_MODE=MCUF_MODUL_DISPLAY_MODE_RANDOM
MCUF_MODUL_DISPLAY_MODE_RANDOM=y NET_MAX_FRAME_LENGTH_GT_571=y
CONF_ARTNET_PORT=6454 CONF_ARTNET_INUNIVERSE=1 CONF_ARTNET_OUTUNIVERSE=0
DMX_OUTPUT_UNIVERSE=1 DMX_USART_0=y DMX_USE_USART=0
ECMD_PARSER_SUPPORT=y ECMD_TCP_SUPPORT=y ECMD_TCP_PORT=2701
FNORDLICHT_BAUDRATE=19200 CONF_FNORDLICHTER=1
CONF_HTTPLOG_SERVICE="volkszaehler.org"
CONF_HTTPLOG_PATH="/httplog/httplog.php"
CONF_HTTPLOG_UUID="12345678-9ABC-DEF0-1234-56789ABCDEF0"
HTTPLOG_BUFFER_LEN=140 CONF_IRC_IP="192.168.23.254" CONF_IRC_PORT=6667
CONF_IRC_CHANNEL="ethersex" CONF_IRC_USERNAME="ethersex"
CONF_IRC_NICKNAME="ethersex" CONF_IRC_REALNAME="Ethersex Wollmilchsau"
CONF_MYSQL_IP="192.168.23.254" CONF_MYSQL_USERNAME="root"
CONF_MYSQL_PASSWORD="password" CONF_MYSQL_SCHEMA="mavisdb"
CONF_NETSTAT_SERVICE_IP="188.40.33.175"
CONF_NETSTAT_SERVICE="ethersex.de <http://ethersex.de> " CONF_NETSTAT_API="/~habo/stat/"
CONF_SENDMAIL_IP="78.47.210.246"
CONF_SENDMAIL_FROM="root at sex.metafnord.de"
CONF_SENDMAIL_TO="stesie at brokenpipe.de"
CONF_SMS77_SERVICE="gateway.sms77.de" CONF_SMS77_USER=""
CONF_SMS77_PASS="" CONF_SMS77_TO=""
CONF_SMS77_TYPE_CHOICE=CONF_SMS77_TYPE_BASICPLUS
CONF_SMS77_TYPE_BASICPLUS=y CONF_SMS77_TYPE="basicplus"
CONF_SYSLOG_SERVER="192.168.178.91" CONF_TWITTER_SERVICE="identi.ca"
CONF_TWITTER_API="/api" CONF_TWITTER_USERNAME="ethersex"
CONF_TWITTER_PASSWORD="" CONF_TWITTER_AUTH="ZXRoZXJzZXg6"
CONF_USTREAM_IP="205.188.234.7" CONF_USTREAM_PORT=80 YPORT_SUPPORT=y
YPORT_USART_1=y YPORT_USE_USART=1 YPORT_PORT=7970 YPORT_BAUDRATE=9600
YPORT_USART_MODE=YPORT_USE_8N1 YPORT_USE_8N1=y YPORT_BUFFER_LEN=511
ZPORT_SUPPORT=y ZPORT_USART_0=y ZPORT_USE_USART=0 ZPORT_PORT=7980
ZPORT_BAUDRATE=300 ZPORT_USART_MODE=ZPORT_USE_7E1 ZPORT_USE_7E1=y
ZPORT_BUFFER_LEN=511 MSR1_USART_0=y MSR1_USE_USART=0 TO1_USART_0=y
TO1_USE_USART=0 TO1_SENSOR_COUNT=1 SERIAL_LINE_LOG_TIMEOUT=20
SERIAL_LINE_LOG_EOL=0A SERIAL_LINE_LOG_COUNT=60
SERIAL_LINE_LOG_BAUDRATE=9600 NMEA_USART_0=y NMEA_USE_USART=0
UDP_STELLA_PORT=2702 UDP_IO_PORT=2703 UDP_MOTORCURTAIN_PORT=2704
CW_WPM=12 CLOCK_SUPPORT=y CLOCK_DATETIME_SUPPORT=y TZ_OFFSET=60
DST_OFFSET=60 DST_BEGIN_MONTH=3 DST_BEGIN_WEEK=5 DST_BEGIN_DOW=0
DST_BEGIN_HOUR=2 DST_END_MONTH=10 DST_END_WEEK=5 DST_END_DOW=0
DST_END_HOUR=3 CLOCK_CRYSTAL_SUPPORT=y CLOCK_NTP_ADJUST_SUPPORT=y
NTP_SUPPORT=y NTP_SERVER="ptbtime1.ptb.de" NTP_PORT=123
NTP_QUERY_INTERVAL=1800 DMX_STORAGE_UNIVERSES=2 DMX_STORAGE_CHANNELS=64
DMX_STORAGE_SLOTS=5 DMX_FXSLOT_AMOUNT=4 CONF_MOTD_DEFAULT="empty"
CONF_MOTD_SIZE=50 HTTPD_SUPPORT=y HTTPD_PORT=80
HTTPD_ALTERNATE_PORT=8000 CONF_JABBER_IP="78.47.210.246"
CONF_JABBER_HOSTNAME="jabber.zerties.org" CONF_JABBER_USERNAME="esex"
CONF_JABBER_PASSWORD="password" CONF_JABBER_RESOURCE="ethersex"
CONF_JABBER_BUDDY="stesie at jabber.zerties.org"
MOODLIGHT_CHANGEGAP_INIT=120 STELLA_FREQ=stella_normal stella_normal=y
STELLA_START=stella_start_zero stella_start_zero=y
STELLA_FADE_STEP_INIT=10 STELLA_FADE_FUNCTION_INIT=stella_fade_func_0
stella_fade_func_0=y CONF_UPNP_MULTICAST_IP="239.255.255.250"
CONF_UPNP_SCHEME_FILENAME="/ih.xml" VNC_PORT=5900
CONF_WATCHASYNC_SERVER="Frischke" CONF_WATCHASYNC_PORT=1338
CONF_WATCHASYNC_METHOD="POST"
CONF_WATCHASYNC_PATH="/middleware.php/data/" CONF_WATCHASYNC_END_PATH=""
CONF_WATCHASYNC_TIMESTAMP=y CONF_WATCHASYNC_TIMESTAMP_PATH=".json?ts="
CONF_WATCHASYNC_RESOLUTION=1 CONF_WATCHASYNC_SUMMARIZE=y
CONF_WATCHASYNC_SUMMARIZE_PATH="000&value="
CONF_WATCHASYNC_COUNTERRANGE=CONF_WATCHASYNC_16BITS
CONF_WATCHASYNC_16BITS=y CONF_WATCHASYNC_BUFFERSIZE=64
CONF_WATCHASYNC_PA3=y
CONF_WATCHASYNC_PA3_ID="03e219ae-47d1-cf5b-aabc-aa24703a22d8"
CONF_WATCHASYNC_PA4=y
CONF_WATCHASYNC_PA4_ID="91722365-3674-a389-0d3c-975eaf0e71d9"
CONF_WATCHASYNC_PA5=y
CONF_WATCHASYNC_PA5_ID="1baa214d-fdc1-7513-9189-b0fa6f1a0491"
CONF_SENSOR_PSU="1015ccf501080065" CONF_SENSOR_AIR="10567cf501080006"
CONF_SENSOR_RAM="10cba7f5010800d3" CONF_LOME6_POD=0
CONF_TIME2PRESS_RESET=40 CONF_TIME2PRESS_POWER=40
CONF_TIME2PRESS_POWERL=3 FREQCOUNT_CHANNELS=1 FREQCOUNT_AVERAGE=8
USART_SUPPORT=y IPV4_SUPPORT=y # git id: commit
835b972652dd4f72d85c668599767c0331258f41 # compile date: Sun Feb 16
06:49:17 PST 2014 # gcc version: gcc version 4.5.3 (GCC) # ld version:
GNU ld (GNU Binutils) 2.20.1.20100303
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://demo.volkszaehler.org/pipermail/volkszaehler-users/attachments/20190504/fcde3be2/attachment-0001.html>
More information about the volkszaehler-users
mailing list