[vz-users] VZ läuft nach Neuinstallation nicht komplett
Christian Wulff
christianwulff at gmx.de
Sa Jul 25 11:07:59 CEST 2020
Moin,
Ich kriege meinen VZ leider nach Neuinstallation nicht wieder ans Laufen ☹
Kann mir vielleicht jemand helfen?
Ich Danke im Voraus und wünsche liebe Grüße,
Chris
Aktuell sind nur ein S0 Wasserzähler und 3 Temperatursensoren konfiguriert. 2 Laufen, einer nicht.
Der S0 Zähler zählt nix.
Per direkter Abfrage laufen alle 3 Temperatursensoren einwandfrei:
pi at raspberrypi:~ $ cat /sys/bus/w1/devices/28-021573c05eff/w1_slave
ba 02 4b 01 7f ff 0c 10 c8 : crc=c8 YES
ba 02 4b 01 7f ff 0c 10 c8 t=43625
pi at raspberrypi:~ $ cat /sys/bus/w1/devices/28-021573bfdbff/w1_slave
2a 01 4b 01 7f ff 0c 10 49 : crc=49 YES
2a 01 4b 01 7f ff 0c 10 49 t=18625
pi at raspberrypi:~ $ cat /sys/bus/w1/devices/28-000007b375c3/w1_slave
61 01 4b 46 7f ff 0f 10 02 : crc=02 YES
61 01 4b 46 7f ff 0f 10 02 t=22062
Hier ist die valide vzlogger.conf:
/**
* vzlogger configuration
*
* Use properly encoded JSON with javascript comments
*
* Take a look at the wiki for detailed information:
* http://wiki.volkszaehler.org/software/controller/vzlogger#configuration
*
* For an online configuration editor refer to:
* http://volkszaehler.github.io/vzlogger/
*/
{
// General settings
"daemon": true, // run periodically
"verbosity": 15, // log verbosity (0=log_alert, 1=log_error, 3=log_warning, 5=log_info, 10=log_debug, 15=log_finest)
"log": "/var/log/vzlogger.log", // log file, optional
"retry": 10, // http retry delay in seconds
// Build-in HTTP server
"local": {
"enabled": true, // enable local HTTPd for serving live readings
"port": 8080, // TCP port for local HTTPd
"index": true, // provide index listing of available channels if no UUID was requested
"timeout": 30, // timeout for long polling comet requests in seconds (0 disables comet)
"buffer": 10 // HTTPd buffer configuration for serving readings, default -1
// >0: number of seconds of readings to serve
// <0: number of tuples to server per channel (e.g. -3 will serve 3 tuples)
},
// realtime notification settings
"push": [
{
"url": "http://127.0.0.1:5582" // notification destination, e.g. frontend push-server
}
],
// mqtt client support (if ENABLE_MQTT set at cmake generation)
"mqtt": {
"enabled": false, // enable mqtt client. needs host and port as well
"host": "test.mosquitto.org", // mqtt server addr
"port": 1883, // 1883 for unencrypted, 8883 enc, 8884 enc cert needed,
"cafile": "", // optional file with server CA
"capath": "", // optional path for server CAs. see mosquitto.conf. Specify only cafile or capath
"certfile": "", // optional file for your client certificate (e.g. client.crt)
"keyfile": "", // optional path for your client certficate private key (e.g. client.key)
"keypass": "", // optional password for your private key
"keepalive": 30, // optional keepalive in seconds.
"topic": "vzlogger/data", // optional topic dont use $ at start and no / at end
"user": "", // optional user name for the mqtt server
"pass": "", // optional password for the mqtt server
"retain": false, // optional use retain message flag
"rawAndAgg": false, // optional publish raw values even if agg mode is used
"qos": 0, // optional quality of service, default is 0
"timestamp": false // optional whether to include a timestamp in the payload
},
// Meter configuration
"meters": [
{
// S0 meter Wasserzähler
"enabled": true, // disabled meters will be ignored (default)
"skip": false, // errors when opening meter may be ignored if enabled
"interval": -1,
"aggtime": -1,
"protocol": "s0", // meter protocol, see 'vzlogger -h' for full list
"gpio": 4,
"configureGPIO": true,
"debounce_delay": 0,
"aggtime": 300, // aggregate meter readings and send middleware update after <aggtime> seconds
"aggfixedinterval": false, // round timestamps to nearest <aggtime> before sending to middleware
"channel": {
"identifier": "Impulse", // s0 meter knows "Impulse" and "Power"
"uuid": "0f45a600-97c8-11e6-a98b-f94fff86df2b",
"api": "volkszaehler",
"middleware": "http://127.0.0.1/middleware.php",
"duplicates": 0,
"aggmode": "none" // aggregation mode: aggregate meter readings during <aggtime> interval
// "SUM": add readings (use for s0 impulses)
// "MAX": maximum value (use for meters sending absolute readings)
// "AVG": average value (use for meters sending current usage)
}
},
{
// 1-Wire temp sensors:
"enabled": true,
"skip": false,
"interval": 30,
"aggtime": -1,
"aggfixedinterval": false,
"protocol": "w1therm",
"channels": [
{
"uuid": "60b75820-97d9-11e6-8c9e-ed7c96d54c3f",
"identifier": "28-021573c05eff",
"api": "volkszaehler",
"middleware": "http://127.0.0.1/middleware.php",
"aggmode": "none",
"duplicates": 0
},
{
"uuid": "05ce3700-97c7-11e6-acf4-754d9577033c",
"identifier": "28-021573bfdbff",
"api": "volkszaehler",
"middleware": "http://127.0.0.1/middleware.php",
"aggmode": "none",
"duplicates": 0
},
{
"uuid": "7a5bd950-97e4-11e6-b969-8fbfb0d412d6",
"identifier": "28-000007b375c3",
"api": "volkszaehler",
"middleware": "http://127.0.0.1/middleware.php",
"aggmode": "none",
"duplicates": 0
}
]
}
]
}
Hier die vzlogger.log:
[Jul 25 10:50:51][main] vzlogger v0.8.0 based on heads/master-0-g8d06176360 from Sat, 18 Jan 2020 09:23:08 +0100 started.
[Jul 25 10:50:51][mqtt] MqttClient::MqttClient called
[Jul 25 10:50:51][mqtt] using libmosquitto 1.5.7
[Jul 25 10:50:51][mqtt] ~MqttClient called
[Jul 25 10:50:51][mqtt] mqtt client not configured. stopped.
[Jul 25 10:50:51][mtr0] Creating new meter with protocol s0.
[Jul 25 10:50:51][mtr0] Meter configured, enabled.
[Jul 25 10:50:51] New meter initialized (protocol=s0)
[Jul 25 10:50:51] Configure channel.
[Jul 25 10:50:51][chn0] New channel initialized (uuid=...86df2b api=volkszaehler id=Impulse)
[Jul 25 10:50:51][mtr1] Creating new meter with protocol w1therm.
[Jul 25 10:50:51][mtr1] Meter configured, enabled.
[Jul 25 10:50:51] New meter initialized (protocol=w1therm)
[Jul 25 10:50:51] Configure channel.
[Jul 25 10:50:51][chn1] New channel initialized (uuid=...d54c3f api=volkszaehler id=28-021573c05eff)
[Jul 25 10:50:51] Configure channel.
[Jul 25 10:50:51][chn2] New channel initialized (uuid=...77033c api=volkszaehler id=28-021573bfdbff)
[Jul 25 10:50:51] Configure channel.
[Jul 25 10:50:51][chn3] New channel initialized (uuid=...d412d6 api=volkszaehler id=28-000007b375c3)
[Jul 25 10:50:51] Have 2 meters.
[Jul 25 10:50:51][main] log level is 15
[Jul 25 10:50:51][main] daemon=1, local=1
[Jul 25 10:50:51] Daemonize process...
[Jul 25 10:50:51] Opened logfile /var/log/vzlogger.log
[Jul 25 10:50:51][push] pushdata_thread created.
[Jul 25 10:50:51][push] Start push_data_thread
[Jul 25 10:50:51][] ===> Start meters
[Jul 25 10:50:52][s0] counter_thread created
[Jul 25 10:50:52][s0] Counter thread started with blocking hwif
[Jul 25 10:50:52][mtr0] Meter connection established
[Jul 25 10:50:52][mtr0] Meter thread started
[Jul 25 10:50:52][mtr0] Meter is opened. Starting channels.
[Jul 25 10:50:52][chn0] Logging thread started
[Jul 25 10:50:52][w1t] open found 25 w1 devices
[Jul 25 10:50:52][mtr1] Meter connection established
[Jul 25 10:50:52][mtr1] Meter thread started
[Jul 25 10:50:52][mtr1] Meter is opened. Starting channels.
[Jul 25 10:50:52][chn1] Logging thread started
[Jul 25 10:50:52][chn2] Logging thread started
[Jul 25 10:50:52][chn3] Logging thread started
[Jul 25 10:50:52][http] Starting local interface HTTPd on port 8080
[Jul 25 10:50:52][chn2] Start logging thread for volkszaehler-api. Running as daemon: yes
[Jul 25 10:50:52][chn2] Using default volkszaehler api.
[Jul 25 10:50:52][] Startup done.
[Jul 25 10:50:52][mtr1] Number of readers: 400
[Jul 25 10:50:52][mtr1] Config.daemon: 1
[Jul 25 10:50:52][mtr1] Config.local: 1
[Jul 25 10:50:52][chn0] Start logging thread for volkszaehler-api. Running as daemon: yes
[Jul 25 10:50:52][chn0] Using default volkszaehler api.
[Jul 25 10:50:52][chn1] Start logging thread for volkszaehler-api. Running as daemon: yes
[Jul 25 10:50:52][chn1] Using default volkszaehler api.
[Jul 25 10:50:52][mtr0] Number of readers: 4
[Jul 25 10:50:52][mtr0] Config.daemon: 1
[Jul 25 10:50:52][mtr0] Config.local: 1
[Jul 25 10:50:52][chn3] Start logging thread for volkszaehler-api. Running as daemon: yes
[Jul 25 10:50:52][chn3] Using default volkszaehler api.
[Jul 25 10:50:52][w1t] read 20.937000 from /sys/bus/w1/devices/28-0416c14e20ff/w1_slave (t=20937
)
[Jul 25 10:50:52][w1t] reading w1 device 28-0416c14e20ff returned 20.937000
[Jul 25 10:50:53][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:50:53][w1t] read 23.250000 from /sys/bus/w1/devices/28-0316b5c8acff/w1_slave (t=23250
)
[Jul 25 10:50:53][w1t] reading w1 device 28-0316b5c8acff returned 23.250000
[Jul 25 10:50:54][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:50:54][w1t] read 20.875000 from /sys/bus/w1/devices/28-0416c19867ff/w1_slave (t=20875
)
[Jul 25 10:50:54][w1t] reading w1 device 28-0416c19867ff returned 20.875000
[Jul 25 10:50:55][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:50:55][w1t] read 21.000000 from /sys/bus/w1/devices/28-0316b55792ff/w1_slave (t=21000
)
[Jul 25 10:50:55][w1t] reading w1 device 28-0316b55792ff returned 21.000000
[Jul 25 10:50:56][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:50:56][w1t] read 23.875000 from /sys/bus/w1/devices/28-0316b58a6cff/w1_slave (t=23875
)
[Jul 25 10:50:56][w1t] reading w1 device 28-0316b58a6cff returned 23.875000
[Jul 25 10:50:56][push] waitAndSendOnceToAll empty dataMap (timeout?)
[Jul 25 10:50:57][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:50:57][w1t] read 22.812000 from /sys/bus/w1/devices/28-0416915d81ff/w1_slave (t=22812
)
[Jul 25 10:50:57][w1t] reading w1 device 28-0416915d81ff returned 22.812000
[Jul 25 10:50:58][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:50:58][w1t] read 23.562000 from /sys/bus/w1/devices/28-0315747783ff/w1_slave (t=23562
)
[Jul 25 10:50:58][w1t] reading w1 device 28-0315747783ff returned 23.562000
[Jul 25 10:50:59][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:50:59][w1t] read 29.437000 from /sys/bus/w1/devices/28-0416c19884ff/w1_slave (t=29437
)
[Jul 25 10:50:59][w1t] reading w1 device 28-0416c19884ff returned 29.437000
[Jul 25 10:51:00][w1t] read 29.937000 from /sys/bus/w1/devices/28-021573c015ff/w1_slave (t=29937
)
[Jul 25 10:51:00][w1t] reading w1 device 28-021573c015ff returned 29.937000
[Jul 25 10:51:00][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:00][w1t] read 20.750000 from /sys/bus/w1/devices/28-0316b5be3cff/w1_slave (t=20750
)
[Jul 25 10:51:00][w1t] reading w1 device 28-0316b5be3cff returned 20.750000
[Jul 25 10:51:01][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:02][push] waitAndSendOnceToAll empty dataMap (timeout?)
[Jul 25 10:51:02][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:02][w1t] read 20.875000 from /sys/bus/w1/devices/28-0316b5a343ff/w1_slave (t=20875
)
[Jul 25 10:51:02][w1t] reading w1 device 28-0316b5a343ff returned 20.875000
[Jul 25 10:51:03][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:03][w1t] read 24.187000 from /sys/bus/w1/devices/28-000007b1805c/w1_slave (t=24187
)
[Jul 25 10:51:03][w1t] reading w1 device 28-000007b1805c returned 24.187000
[Jul 25 10:51:04][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:04][w1t] read 21.500000 from /sys/bus/w1/devices/28-0416c152a1ff/w1_slave (t=21500
)
[Jul 25 10:51:04][w1t] reading w1 device 28-0416c152a1ff returned 21.500000
[Jul 25 10:51:05][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:05][w1t] read 21.500000 from /sys/bus/w1/devices/28-0416c170adff/w1_slave (t=21500
)
[Jul 25 10:51:05][w1t] reading w1 device 28-0416c170adff returned 21.500000
[Jul 25 10:51:06][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:06][w1t] read 38.062000 from /sys/bus/w1/devices/28-021573aaeeff/w1_slave (t=38062
)
[Jul 25 10:51:06][w1t] reading w1 device 28-021573aaeeff returned 38.062000
[Jul 25 10:51:06][w1t] read 43.687000 from /sys/bus/w1/devices/28-021573c05eff/w1_slave (t=43687
)
[Jul 25 10:51:06][w1t] reading w1 device 28-021573c05eff returned 43.687000
[Jul 25 10:51:07][push] waitAndSendOnceToAll empty dataMap (timeout?)
[Jul 25 10:51:07][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:07][w1t] read 20.875000 from /sys/bus/w1/devices/28-0516b495e8ff/w1_slave (t=20875
)
[Jul 25 10:51:07][w1t] reading w1 device 28-0516b495e8ff returned 20.875000
[Jul 25 10:51:08][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:08][w1t] read 22.437000 from /sys/bus/w1/devices/28-0215733879ff/w1_slave (t=22437
)
[Jul 25 10:51:08][w1t] reading w1 device 28-0215733879ff returned 22.437000
[Jul 25 10:51:09][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:09][w1t] read 23.437000 from /sys/bus/w1/devices/28-0115736c5eff/w1_slave (t=23437
)
[Jul 25 10:51:09][w1t] reading w1 device 28-0115736c5eff returned 23.437000
[Jul 25 10:51:10][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:10][w1t] read 21.312000 from /sys/bus/w1/devices/28-0516b4e815ff/w1_slave (t=21312
)
[Jul 25 10:51:10][w1t] reading w1 device 28-0516b4e815ff returned 21.312000
[Jul 25 10:51:11][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:11][w1t] read 20.875000 from /sys/bus/w1/devices/28-021573bef0ff/w1_slave (t=20875
)
[Jul 25 10:51:11][w1t] reading w1 device 28-021573bef0ff returned 20.875000
[Jul 25 10:51:12][push] waitAndSendOnceToAll empty dataMap (timeout?)
[Jul 25 10:51:12][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:12][w1t] read 22.000000 from /sys/bus/w1/devices/28-000007b375c3/w1_slave (t=22000
)
[Jul 25 10:51:12][w1t] reading w1 device 28-000007b375c3 returned 22.000000
[Jul 25 10:51:24][push] waitAndSendOnceToAll empty dataMap (timeout?)
[Jul 25 10:51:24][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:25][w1t] read 21.812000 from /sys/bus/w1/devices/28-0516905521ff/w1_slave (t=21812
)
[Jul 25 10:51:25][w1t] reading w1 device 28-0516905521ff returned 21.812000
[Jul 25 10:51:25][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:26][w1t] read 29.375000 from /sys/bus/w1/devices/28-0215733893ff/w1_slave (t=29375
)
[Jul 25 10:51:26][w1t] reading w1 device 28-0215733893ff returned 29.375000
[Jul 25 10:51:26][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:27][w1t] read 23.750000 from /sys/bus/w1/devices/28-0316b583a6ff/w1_slave (t=23750
)
[Jul 25 10:51:27][w1t] reading w1 device 28-0316b583a6ff returned 23.750000
[Jul 25 10:51:27][mtr1] Got 25 new readings from meter:
[Jul 25 10:51:27][mtr1] Reading: id=28-0416c14e20ff/StringIdentifier: value=20.94 ts=1595667052958
[Jul 25 10:51:27][mtr1] Reading: id=28-0316b5c8acff/StringIdentifier: value=23.25 ts=1595667053837
[Jul 25 10:51:27][mtr1] Reading: id=28-0416c19867ff/StringIdentifier: value=20.88 ts=1595667054732
[Jul 25 10:51:27][mtr1] Reading: id=28-0316b55792ff/StringIdentifier: value=21.00 ts=1595667055595
[Jul 25 10:51:27][mtr1] Reading: id=28-0316b58a6cff/StringIdentifier: value=23.88 ts=1595667056492
[Jul 25 10:51:27][mtr1] Reading: id=28-0416915d81ff/StringIdentifier: value=22.81 ts=1595667057372
[Jul 25 10:51:27][mtr1] Reading: id=28-0315747783ff/StringIdentifier: value=23.56 ts=1595667058252
[Jul 25 10:51:27][mtr1] Reading: id=28-0416c19884ff/StringIdentifier: value=29.44 ts=1595667059115
[Jul 25 10:51:27][mtr1] Reading: id=28-021573c015ff/StringIdentifier: value=29.94 ts=1595667060002
[Jul 25 10:51:27][mtr1] Reading: id=28-0316b5be3cff/StringIdentifier: value=20.75 ts=1595667060905
[Jul 25 10:51:27][mtr1] Reading: id=28-0316b5a343ff/StringIdentifier: value=20.88 ts=1595667062235
[Jul 25 10:51:27][mtr1] Reading: id=28-000007b1805c/StringIdentifier: value=24.19 ts=1595667063337
[Jul 25 10:51:27][mtr1] Reading: id=28-0416c152a1ff/StringIdentifier: value=21.50 ts=1595667064252
[Jul 25 10:51:27][mtr1] Reading: id=28-0416c170adff/StringIdentifier: value=21.50 ts=1595667065132
[Jul 25 10:51:27][mtr1] Reading: id=28-021573aaeeff/StringIdentifier: value=38.06 ts=1595667066012
[Jul 25 10:51:27][mtr1] Reading: id=28-021573c05eff/StringIdentifier: value=43.69 ts=1595667066892
[Jul 25 10:51:27][mtr1] Reading: id=28-0516b495e8ff/StringIdentifier: value=20.88 ts=1595667067774
[Jul 25 10:51:27][mtr1] Reading: id=28-0215733879ff/StringIdentifier: value=22.44 ts=1595667068651
[Jul 25 10:51:27][mtr1] Reading: id=28-0115736c5eff/StringIdentifier: value=23.44 ts=1595667069532
[Jul 25 10:51:27][mtr1] Reading: id=28-0516b4e815ff/StringIdentifier: value=21.31 ts=1595667070469
[Jul 25 10:51:27][mtr1] Reading: id=28-021573bef0ff/StringIdentifier: value=20.88 ts=1595667071355
[Jul 25 10:51:27][mtr1] Reading: id=28-000007b375c3/StringIdentifier: value=22.00 ts=1595667072228
[Jul 25 10:51:27][mtr1] Reading: id=28-0516905521ff/StringIdentifier: value=21.81 ts=1595667085081
[Jul 25 10:51:27][mtr1] Reading: id=28-0215733893ff/StringIdentifier: value=29.38 ts=1595667086103
[Jul 25 10:51:27][mtr1] Reading: id=28-0316b583a6ff/StringIdentifier: value=23.75 ts=1595667087039
[Jul 25 10:51:27][chn1] Adding reading to queue (value=43.69 ts=1595667066892)
[Jul 25 10:51:27][push] added to uuid 60b75820-97d9-11e6-8c9e-ed7c96d54c3f
[Jul 25 10:51:27][push] push: { "data": [ { "uuid": "60b75820-97d9-11e6-8c9e-ed7c96d54c3f", "tuples": [ [ 1595667066892, 43.686999999999998 ] ] } ] }
[Jul 25 10:51:27][chn3] Adding reading to queue (value=22.00 ts=1595667072228)
[Jul 25 10:51:27][push] added to uuid 7a5bd950-97e4-11e6-b969-8fbfb0d412d6
[Jul 25 10:51:27][mtr1] Next reading in 30 seconds
[Jul 25 10:51:27][chn2] ==> number of tuples: 0
[Jul 25 10:51:27][chn2] JSON request body is null. Nothing to send now.
[Jul 25 10:51:27][chn3] ==> number of tuples: 1
[Jul 25 10:51:27][chn3] compare: 0 1595667072228
[Jul 25 10:51:27][chn3] copied 1/1 values for middleware transmission
[Jul 25 10:51:27][chn3] JSON request body: [ [ 1595667072228, 22 ] ]
[Jul 25 10:51:27][chn3] CURL: Expire in 0 ms for 6 (transfer 0x71700c90)
[Jul 25 10:51:27][chn3] CURL: Expire in 30000 ms for 8 (transfer 0x71700c90)
[Jul 25 10:51:27][chn3] CURL: Trying 127.0.0.1...
[Jul 25 10:51:27][chn3] CURL: TCP_NODELAY set
[Jul 25 10:51:27][chn3] CURL: Expire in 200 ms for 4 (transfer 0x71700c90)
[Jul 25 10:51:27][chn3] CURL: Connected to 127.0.0.1 (127.0.0.1) port 80 (#0)
[Jul 25 10:51:27][chn3] CURL: Sent 25 bytes..
[Jul 25 10:51:27][chn3] CURL: Sent '[ [ 1595667072228, 22 ] ]' bytes
[Jul 25 10:51:27][chn3] CURL: upload completely sent off: 25 out of 25 bytes
[Jul 25 10:51:27][chn1] ==> number of tuples: 1
[Jul 25 10:51:27][chn1] compare: 0 1595667066892
[Jul 25 10:51:27][chn1] copied 1/1 values for middleware transmission
[Jul 25 10:51:27][chn3] CURL: Received 26 bytes
[Jul 25 10:51:27][chn3] CURL: Received '{"version":"0.3","rows":1}' bytes
[Jul 25 10:51:27][chn3] CURL: Connection #0 to host 127.0.0.1 left intact
[Jul 25 10:51:27][chn3] CURL Request succeeded with code: 200
[Jul 25 10:51:27][chn3] emptied all (1) values
[Jul 25 10:51:27][chn1] JSON request body: [ [ 1595667066892, 43.686999999999998 ] ]
[Jul 25 10:51:27][chn1] CURL: Expire in 0 ms for 6 (transfer 0x71700c90)
[Jul 25 10:51:27][chn1] CURL: Expire in 30000 ms for 8 (transfer 0x71700c90)
[Jul 25 10:51:27][chn1] CURL: Found bundle for host 127.0.0.1: 0x7170bec0 [can pipeline]
[Jul 25 10:51:27][chn1] CURL: Could pipeline, but not asked to!
[Jul 25 10:51:27][chn1] CURL: Re-using existing connection! (#0) with host 127.0.0.1
[Jul 25 10:51:27][chn1] CURL: Connected to 127.0.0.1 (127.0.0.1) port 80 (#0)
[Jul 25 10:51:27][chn1] CURL: Expire in 0 ms for 6 (transfer 0x71700c90)
[Jul 25 10:51:27][chn1] CURL: Sent 41 bytes..
[Jul 25 10:51:27][chn1] CURL: Sent '[ [ 1595667066892, 43.686999999999998 ] ]' bytes
[Jul 25 10:51:27][chn1] CURL: upload completely sent off: 41 out of 41 bytes
[Jul 25 10:51:27][chn1] CURL: Received 26 bytes
[Jul 25 10:51:27][chn1] CURL: Received '{"version":"0.3","rows":1}' bytes
[Jul 25 10:51:27][chn1] CURL: Connection #0 to host 127.0.0.1 left intact
[Jul 25 10:51:27][chn1] CURL Request succeeded with code: 200
[Jul 25 10:51:27][chn1] emptied all (1) values
[Jul 25 10:51:27][push] CURL Request to http://127.0.0.1:5582 succeeded with code: 200
[Jul 25 10:51:27][push] send ok to url http://127.0.0.1:5582
[Jul 25 10:51:27][push] push: { "data": [ { "uuid": "7a5bd950-97e4-11e6-b969-8fbfb0d412d6", "tuples": [ [ 1595667072228, 22 ] ] } ] }
[Jul 25 10:51:27][push] CURL Request to http://127.0.0.1:5582 succeeded with code: 200
[Jul 25 10:51:27][push] send ok to url http://127.0.0.1:5582
[Jul 25 10:51:27][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:28][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:29][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:30][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:31][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:32][push] waitAndSendOnceToAll empty dataMap (timeout?)
[Jul 25 10:51:32][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:33][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:34][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:35][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:36][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:37][push] waitAndSendOnceToAll empty dataMap (timeout?)
[Jul 25 10:51:37][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:38][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:39][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:40][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:41][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:42][push] waitAndSendOnceToAll empty dataMap (timeout?)
[Jul 25 10:51:42][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:43][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:44][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:45][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:46][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:47][push] waitAndSendOnceToAll empty dataMap (timeout?)
[Jul 25 10:51:47][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:48][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:49][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:50][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:51][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:52][push] waitAndSendOnceToAll empty dataMap (timeout?)
[Jul 25 10:51:52][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:53][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:54][S0] MeterS0:HWIF_GPIO:first poll returned 1
[Jul 25 10:51:55][s0] Reading S0 - returning 1 readings (n=1 n_neg = 0)
[Jul 25 10:51:55][mtr0] Got 1 new readings from meter:
[Jul 25 10:51:55][mtr0] Reading: id=Impulse/StringIdentifier: value=1.00 ts=1595667114726
[Jul 25 10:51:55][chn0] Adding reading to queue (value=1.00 ts=1595667114726)
[Jul 25 10:51:55][push] added to uuid 0f45a600-97c8-11e6-a98b-f94fff86df2b
[Jul 25 10:51:55][push] push: { "data": [ { "uuid": "0f45a600-97c8-11e6-a98b-f94fff86df2b", "tuples": [ [ 1595667114726, 1 ] ] } ] }
[Jul 25 10:51:55][push] CURL Request to http://127.0.0.1:5582 succeeded with code: 200
[Jul 25 10:51:55][push] send ok to url http://127.0.0.1:5582
[Jul 25 10:51:55][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:56][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:57][S0] MeterS0:HWIF_GPIO:first poll returned 1
[Jul 25 10:51:57][w1t] read 20.937000 from /sys/bus/w1/devices/28-0416c14e20ff/w1_slave (t=20937
)
[Jul 25 10:51:57][w1t] reading w1 device 28-0416c14e20ff returned 20.937000
[Jul 25 10:51:58][s0] Reading S0 - returning 2 readings (n=1 n_neg = 0)
[Jul 25 10:51:58][mtr0] Got 2 new readings from meter:
[Jul 25 10:51:58][mtr0] Reading: id=Power/StringIdentifier: value=1319.16 ts=1595667117455
[Jul 25 10:51:58][mtr0] Reading: id=Impulse/StringIdentifier: value=1.00 ts=1595667117455
[Jul 25 10:51:58][chn0] Adding reading to queue (value=1.00 ts=1595667117455)
[Jul 25 10:51:58][push] added to uuid 0f45a600-97c8-11e6-a98b-f94fff86df2b
[Jul 25 10:51:58][push] push: { "data": [ { "uuid": "0f45a600-97c8-11e6-a98b-f94fff86df2b", "tuples": [ [ 1595667117455, 1 ] ] } ] }
[Jul 25 10:51:58][push] CURL Request to http://127.0.0.1:5582 succeeded with code: 200
[Jul 25 10:51:58][push] send ok to url http://127.0.0.1:5582
[Jul 25 10:51:58][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:51:58][w1t] read 23.187000 from /sys/bus/w1/devices/28-0316b5c8acff/w1_slave (t=23187
)
[Jul 25 10:51:58][w1t] reading w1 device 28-0316b5c8acff returned 23.187000
[Jul 25 10:51:59][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:00][w1t] read 20.875000 from /sys/bus/w1/devices/28-0416c19867ff/w1_slave (t=20875
)
[Jul 25 10:52:00][w1t] reading w1 device 28-0416c19867ff returned 20.875000
[Jul 25 10:52:00][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:00][S0] MeterS0:HWIF_GPIO:first poll returned 1
[Jul 25 10:52:01][s0] Reading S0 - returning 2 readings (n=1 n_neg = 0)
[Jul 25 10:52:01][mtr0] Got 2 new readings from meter:
[Jul 25 10:52:01][mtr0] Reading: id=Power/StringIdentifier: value=1077.84 ts=1595667120795
[Jul 25 10:52:01][mtr0] Reading: id=Impulse/StringIdentifier: value=1.00 ts=1595667120795
[Jul 25 10:52:01][chn0] Adding reading to queue (value=1.00 ts=1595667120795)
[Jul 25 10:52:01][push] added to uuid 0f45a600-97c8-11e6-a98b-f94fff86df2b
[Jul 25 10:52:01][push] push: { "data": [ { "uuid": "0f45a600-97c8-11e6-a98b-f94fff86df2b", "tuples": [ [ 1595667120795, 1 ] ] } ] }
[Jul 25 10:52:01][push] CURL Request to http://127.0.0.1:5582 succeeded with code: 200
[Jul 25 10:52:01][push] send ok to url http://127.0.0.1:5582
[Jul 25 10:52:01][w1t] read 20.937000 from /sys/bus/w1/devices/28-0316b55792ff/w1_slave (t=20937
)
[Jul 25 10:52:01][w1t] reading w1 device 28-0316b55792ff returned 20.937000
[Jul 25 10:52:01][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:02][w1t] read 23.875000 from /sys/bus/w1/devices/28-0316b58a6cff/w1_slave (t=23875
)
[Jul 25 10:52:02][w1t] reading w1 device 28-0316b58a6cff returned 23.875000
[Jul 25 10:52:02][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:02][w1t] read 22.812000 from /sys/bus/w1/devices/28-0416915d81ff/w1_slave (t=22812
)
[Jul 25 10:52:02][w1t] reading w1 device 28-0416915d81ff returned 22.812000
[Jul 25 10:52:03][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:03][S0] MeterS0:HWIF_GPIO:first poll returned 1
[Jul 25 10:52:04][s0] Reading S0 - returning 2 readings (n=1 n_neg = 0)
[Jul 25 10:52:04][mtr0] Got 2 new readings from meter:
[Jul 25 10:52:04][mtr0] Reading: id=Power/StringIdentifier: value=1160.54 ts=1595667123897
[Jul 25 10:52:04][mtr0] Reading: id=Impulse/StringIdentifier: value=1.00 ts=1595667123897
[Jul 25 10:52:04][chn0] Adding reading to queue (value=1.00 ts=1595667123897)
[Jul 25 10:52:04][push] added to uuid 0f45a600-97c8-11e6-a98b-f94fff86df2b
[Jul 25 10:52:04][push] push: { "data": [ { "uuid": "0f45a600-97c8-11e6-a98b-f94fff86df2b", "tuples": [ [ 1595667123897, 1 ] ] } ] }
[Jul 25 10:52:04][push] CURL Request to http://127.0.0.1:5582 succeeded with code: 200
[Jul 25 10:52:04][push] send ok to url http://127.0.0.1:5582
[Jul 25 10:52:04][w1t] read 23.562000 from /sys/bus/w1/devices/28-0315747783ff/w1_slave (t=23562
)
[Jul 25 10:52:04][w1t] reading w1 device 28-0315747783ff returned 23.562000
[Jul 25 10:52:04][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:05][w1t] read 29.312000 from /sys/bus/w1/devices/28-0416c19884ff/w1_slave (t=29312
)
[Jul 25 10:52:05][w1t] reading w1 device 28-0416c19884ff returned 29.312000
[Jul 25 10:52:05][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:06][w1t] read 29.937000 from /sys/bus/w1/devices/28-021573c015ff/w1_slave (t=29937
)
[Jul 25 10:52:06][w1t] reading w1 device 28-021573c015ff returned 29.937000
[Jul 25 10:52:06][S0] MeterS0:HWIF_GPIO:first poll returned 1
[Jul 25 10:52:07][s0] Reading S0 - returning 2 readings (n=1 n_neg = 0)
[Jul 25 10:52:07][mtr0] Got 2 new readings from meter:
[Jul 25 10:52:07][mtr0] Reading: id=Power/StringIdentifier: value=1238.39 ts=1595667126804
[Jul 25 10:52:07][mtr0] Reading: id=Impulse/StringIdentifier: value=1.00 ts=1595667126804
[Jul 25 10:52:07][chn0] Adding reading to queue (value=1.00 ts=1595667126804)
[Jul 25 10:52:07][push] added to uuid 0f45a600-97c8-11e6-a98b-f94fff86df2b
[Jul 25 10:52:07][push] push: { "data": [ { "uuid": "0f45a600-97c8-11e6-a98b-f94fff86df2b", "tuples": [ [ 1595667126804, 1 ] ] } ] }
[Jul 25 10:52:07][push] CURL Request to http://127.0.0.1:5582 succeeded with code: 200
[Jul 25 10:52:07][push] send ok to url http://127.0.0.1:5582
[Jul 25 10:52:07][w1t] read 20.750000 from /sys/bus/w1/devices/28-0316b5be3cff/w1_slave (t=20750
)
[Jul 25 10:52:07][w1t] reading w1 device 28-0316b5be3cff returned 20.750000
[Jul 25 10:52:07][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:08][w1t] read 20.937000 from /sys/bus/w1/devices/28-0316b5a343ff/w1_slave (t=20937
)
[Jul 25 10:52:08][w1t] reading w1 device 28-0316b5a343ff returned 20.937000
[Jul 25 10:52:08][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:08][w1t] read 24.187000 from /sys/bus/w1/devices/28-000007b1805c/w1_slave (t=24187
)
[Jul 25 10:52:08][w1t] reading w1 device 28-000007b1805c returned 24.187000
[Jul 25 10:52:09][w1t] read 21.500000 from /sys/bus/w1/devices/28-0416c152a1ff/w1_slave (t=21500
)
[Jul 25 10:52:09][w1t] reading w1 device 28-0416c152a1ff returned 21.500000
[Jul 25 10:52:09][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:10][w1t] read 21.500000 from /sys/bus/w1/devices/28-0416c170adff/w1_slave (t=21500
)
[Jul 25 10:52:10][w1t] reading w1 device 28-0416c170adff returned 21.500000
[Jul 25 10:52:10][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:11][w1t] read 38.062000 from /sys/bus/w1/devices/28-021573aaeeff/w1_slave (t=38062
)
[Jul 25 10:52:11][w1t] reading w1 device 28-021573aaeeff returned 38.062000
[Jul 25 10:52:11][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:12][push] waitAndSendOnceToAll empty dataMap (timeout?)
[Jul 25 10:52:12][w1t] read 43.687000 from /sys/bus/w1/devices/28-021573c05eff/w1_slave (t=43687
)
[Jul 25 10:52:12][w1t] reading w1 device 28-021573c05eff returned 43.687000
[Jul 25 10:52:12][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:13][w1t] read 20.875000 from /sys/bus/w1/devices/28-0516b495e8ff/w1_slave (t=20875
)
[Jul 25 10:52:13][w1t] reading w1 device 28-0516b495e8ff returned 20.875000
[Jul 25 10:52:13][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:14][w1t] read 22.437000 from /sys/bus/w1/devices/28-0215733879ff/w1_slave (t=22437
)
[Jul 25 10:52:14][w1t] reading w1 device 28-0215733879ff returned 22.437000
[Jul 25 10:52:14][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:15][w1t] read 23.437000 from /sys/bus/w1/devices/28-0115736c5eff/w1_slave (t=23437
)
[Jul 25 10:52:15][w1t] reading w1 device 28-0115736c5eff returned 23.437000
[Jul 25 10:52:15][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:16][w1t] read 21.312000 from /sys/bus/w1/devices/28-0516b4e815ff/w1_slave (t=21312
)
[Jul 25 10:52:16][w1t] reading w1 device 28-0516b4e815ff returned 21.312000
[Jul 25 10:52:16][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:17][push] waitAndSendOnceToAll empty dataMap (timeout?)
[Jul 25 10:52:17][w1t] read 20.875000 from /sys/bus/w1/devices/28-021573bef0ff/w1_slave (t=20875
)
[Jul 25 10:52:17][w1t] reading w1 device 28-021573bef0ff returned 20.875000
[Jul 25 10:52:17][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:18][w1t] read 22.000000 from /sys/bus/w1/devices/28-000007b375c3/w1_slave (t=22000
)
[Jul 25 10:52:18][w1t] reading w1 device 28-000007b375c3 returned 22.000000
[Jul 25 10:52:18][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:19][w1t] read 21.812000 from /sys/bus/w1/devices/28-0516905521ff/w1_slave (t=21812
)
[Jul 25 10:52:19][w1t] reading w1 device 28-0516905521ff returned 21.812000
[Jul 25 10:52:19][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:20][w1t] read 29.312000 from /sys/bus/w1/devices/28-0215733893ff/w1_slave (t=29312
)
[Jul 25 10:52:20][w1t] reading w1 device 28-0215733893ff returned 29.312000
[Jul 25 10:52:20][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:21][w1t] read 23.750000 from /sys/bus/w1/devices/28-0316b583a6ff/w1_slave (t=23750
)
[Jul 25 10:52:21][w1t] reading w1 device 28-0316b583a6ff returned 23.750000
[Jul 25 10:52:21][mtr1] Got 25 new readings from meter:
[Jul 25 10:52:21][mtr1] Reading: id=28-0416c14e20ff/StringIdentifier: value=20.94 ts=1595667117961
[Jul 25 10:52:21][mtr1] Reading: id=28-0316b5c8acff/StringIdentifier: value=23.19 ts=1595667118838
[Jul 25 10:52:21][mtr1] Reading: id=28-0416c19867ff/StringIdentifier: value=20.88 ts=1595667120239
[Jul 25 10:52:21][mtr1] Reading: id=28-0316b55792ff/StringIdentifier: value=20.94 ts=1595667121238
[Jul 25 10:52:21][mtr1] Reading: id=28-0316b58a6cff/StringIdentifier: value=23.88 ts=1595667122118
[Jul 25 10:52:21][mtr1] Reading: id=28-0416915d81ff/StringIdentifier: value=22.81 ts=1595667122998
[Jul 25 10:52:21][mtr1] Reading: id=28-0315747783ff/StringIdentifier: value=23.56 ts=1595667124123
[Jul 25 10:52:21][mtr1] Reading: id=28-0416c19884ff/StringIdentifier: value=29.31 ts=1595667125006
[Jul 25 10:52:21][mtr1] Reading: id=28-021573c015ff/StringIdentifier: value=29.94 ts=1595667126198
[Jul 25 10:52:21][mtr1] Reading: id=28-0316b5be3cff/StringIdentifier: value=20.75 ts=1595667127119
[Jul 25 10:52:21][mtr1] Reading: id=28-0316b5a343ff/StringIdentifier: value=20.94 ts=1595667128038
[Jul 25 10:52:21][mtr1] Reading: id=28-000007b1805c/StringIdentifier: value=24.19 ts=1595667128918
[Jul 25 10:52:21][mtr1] Reading: id=28-0416c152a1ff/StringIdentifier: value=21.50 ts=1595667129798
[Jul 25 10:52:21][mtr1] Reading: id=28-0416c170adff/StringIdentifier: value=21.50 ts=1595667130678
[Jul 25 10:52:21][mtr1] Reading: id=28-021573aaeeff/StringIdentifier: value=38.06 ts=1595667131640
[Jul 25 10:52:21][mtr1] Reading: id=28-021573c05eff/StringIdentifier: value=43.69 ts=1595667132678
[Jul 25 10:52:21][mtr1] Reading: id=28-0516b495e8ff/StringIdentifier: value=20.88 ts=1595667133638
[Jul 25 10:52:21][mtr1] Reading: id=28-0215733879ff/StringIdentifier: value=22.44 ts=1595667134518
[Jul 25 10:52:21][mtr1] Reading: id=28-0115736c5eff/StringIdentifier: value=23.44 ts=1595667135398
[Jul 25 10:52:21][mtr1] Reading: id=28-0516b4e815ff/StringIdentifier: value=21.31 ts=1595667136318
[Jul 25 10:52:21][mtr1] Reading: id=28-021573bef0ff/StringIdentifier: value=20.88 ts=1595667137572
[Jul 25 10:52:21][mtr1] Reading: id=28-000007b375c3/StringIdentifier: value=22.00 ts=1595667138431
[Jul 25 10:52:21][mtr1] Reading: id=28-0516905521ff/StringIdentifier: value=21.81 ts=1595667139318
[Jul 25 10:52:21][mtr1] Reading: id=28-0215733893ff/StringIdentifier: value=29.31 ts=1595667140198
[Jul 25 10:52:21][mtr1] Reading: id=28-0316b583a6ff/StringIdentifier: value=23.75 ts=1595667141078
[Jul 25 10:52:21][chn1] Adding reading to queue (value=43.69 ts=1595667132678)
[Jul 25 10:52:21][push] added to uuid 60b75820-97d9-11e6-8c9e-ed7c96d54c3f
[Jul 25 10:52:21][push] push: { "data": [ { "uuid": "60b75820-97d9-11e6-8c9e-ed7c96d54c3f", "tuples": [ [ 1595667132678, 43.686999999999998 ] ] } ] }
[Jul 25 10:52:21][chn3] Adding reading to queue (value=22.00 ts=1595667138431)
[Jul 25 10:52:21][push] added to uuid 7a5bd950-97e4-11e6-b969-8fbfb0d412d6
[Jul 25 10:52:21][mtr1] Next reading in 30 seconds
[Jul 25 10:52:21][chn2] ==> number of tuples: 0
[Jul 25 10:52:21][chn2] JSON request body is null. Nothing to send now.
[Jul 25 10:52:21][chn1] ==> number of tuples: 1
[Jul 25 10:52:21][chn1] compare: 1595667066892 1595667132678
[Jul 25 10:52:21][chn1] copied 1/1 values for middleware transmission
[Jul 25 10:52:21][chn1] JSON request body: [ [ 1595667132678, 43.686999999999998 ] ]
[Jul 25 10:52:21][chn1] CURL: Expire in 0 ms for 6 (transfer 0x71700c90)
[Jul 25 10:52:21][chn1] CURL: Expire in 30000 ms for 8 (transfer 0x71700c90)
[Jul 25 10:52:21][chn1] CURL: Found bundle for host 127.0.0.1: 0x7170bec0 [can pipeline]
[Jul 25 10:52:21][chn1] CURL: Could pipeline, but not asked to!
[Jul 25 10:52:21][chn1] CURL: Re-using existing connection! (#0) with host 127.0.0.1
[Jul 25 10:52:21][chn1] CURL: Connected to 127.0.0.1 (127.0.0.1) port 80 (#0)
[Jul 25 10:52:21][chn1] CURL: Expire in 0 ms for 6 (transfer 0x71700c90)
[Jul 25 10:52:21][chn1] CURL: Sent 41 bytes..
[Jul 25 10:52:21][chn1] CURL: Sent '[ [ 1595667132678, 43.686999999999998 ] ]' bytes
[Jul 25 10:52:21][chn1] CURL: upload completely sent off: 41 out of 41 bytes
[Jul 25 10:52:21][chn3] ==> number of tuples: 1
[Jul 25 10:52:21][chn3] compare: 1595667072228 1595667138431
[Jul 25 10:52:21][chn3] copied 1/1 values for middleware transmission
[Jul 25 10:52:21][push] CURL Request to http://127.0.0.1:5582 succeeded with code: 200
[Jul 25 10:52:21][push] send ok to url http://127.0.0.1:5582
[Jul 25 10:52:21][push] push: { "data": [ { "uuid": "7a5bd950-97e4-11e6-b969-8fbfb0d412d6", "tuples": [ [ 1595667138431, 22 ] ] } ] }
[Jul 25 10:52:21][push] CURL Request to http://127.0.0.1:5582 succeeded with code: 200
[Jul 25 10:52:21][push] send ok to url http://127.0.0.1:5582
[Jul 25 10:52:21][chn1] CURL: Received 26 bytes
[Jul 25 10:52:21][chn1] CURL: Received '{"version":"0.3","rows":1}' bytes
[Jul 25 10:52:21][chn1] CURL: Connection #0 to host 127.0.0.1 left intact
[Jul 25 10:52:21][chn1] CURL Request succeeded with code: 200
[Jul 25 10:52:21][chn1] emptied all (1) values
[Jul 25 10:52:21][chn3] JSON request body: [ [ 1595667138431, 22 ] ]
[Jul 25 10:52:21][chn3] CURL: Expire in 0 ms for 6 (transfer 0x71700c90)
[Jul 25 10:52:21][chn3] CURL: Expire in 30000 ms for 8 (transfer 0x71700c90)
[Jul 25 10:52:21][chn3] CURL: Found bundle for host 127.0.0.1: 0x7170bec0 [can pipeline]
[Jul 25 10:52:21][chn3] CURL: Could pipeline, but not asked to!
[Jul 25 10:52:21][chn3] CURL: Re-using existing connection! (#0) with host 127.0.0.1
[Jul 25 10:52:21][chn3] CURL: Connected to 127.0.0.1 (127.0.0.1) port 80 (#0)
[Jul 25 10:52:21][chn3] CURL: Expire in 0 ms for 6 (transfer 0x71700c90)
[Jul 25 10:52:21][chn3] CURL: Sent 25 bytes..
[Jul 25 10:52:21][chn3] CURL: Sent '[ [ 1595667138431, 22 ] ]' bytes
[Jul 25 10:52:21][chn3] CURL: upload completely sent off: 25 out of 25 bytes
[Jul 25 10:52:21][chn3] CURL: Received 26 bytes
[Jul 25 10:52:21][chn3] CURL: Received '{"version":"0.3","rows":1}' bytes
[Jul 25 10:52:21][chn3] CURL: Connection #0 to host 127.0.0.1 left intact
[Jul 25 10:52:21][chn3] CURL Request succeeded with code: 200
[Jul 25 10:52:21][chn3] emptied all (1) values
[Jul 25 10:52:21][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:22][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:23][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:24][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:25][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:26][push] waitAndSendOnceToAll empty dataMap (timeout?)
[Jul 25 10:52:26][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:27][S0] MeterS0:HWIF_GPIO:first poll returned 0
[Jul 25 10:52:28][S0] MeterS0:HWIF_GPIO:first poll returned 0
-------------- nächster Teil --------------
Ein Dateianhang mit HTML-Daten wurde abgetrennt...
URL: <http://demo.volkszaehler.org/pipermail/volkszaehler-users/attachments/20200725/6110e30d/attachment-0001.html>
Mehr Informationen über die Mailingliste volkszaehler-users