[vz-users] VZLogger: Startup failed

Sa Apr 30 21:17:17 CEST 2022

Kurzes Update:

Ich habe herausgefunden das es am [mtr2] lag.

Dieses ist wie folgt konfiguriert und so auch bisher problemlos gelaufen:

    // Gartenwasserzähler via IR-Sensor an S0/2

    {

    "enabled": true,

      "allowskip": true,

      "interval": -1,

      "aggtime": 30,

      "aggfixedinterval": false,

      "channels": [

        {

          "api": "volkszaehler",

          "uuid": "5ae2c260-*******",

          "identifier": "Impulse",

          "middleware": "http://localhost/middleware.php",

          "aggmode": "sum",

          "duplicates": 0

        }

      ],

      "protocol": "s0",

      "device": "",

      "gpio": 17,

      "mmap": "",

      "gpio_dir": -1,

      "configureGPIO": true,

      "resolution": 1,

      "send_zero": true,  //jede Sekunde Nullwerte senden (keine Nullwerte =
false)

      "debounce_delay": 0,

      "nonblocking_delay": 100000

    },

Nachdem dem ich VZlogger mit deaktiviertem [mrt2] neu gestartet habe lief
er. Ich habe [mtr2] dann wieder aktiviert und VZlogger ein weiteres Mal neu
gestartet. Jetzt läuft er ebenfalls wieder mit aktiviertem Zähler

Fällt jemandem an der Config etwas auf, was ein Problem machen könnte?

Liebe Grüße

Micha

Von: volkszaehler-users
[mailto:volkszaehler-users-bounces at demo.volkszaehler.org] Im Auftrag von
Michael Hartmann
Gesendet: Samstag, 30. April 2022 20:56
An: 'volkszaehler.org - users'
Betreff: [vz-users] VZLogger: Startup failed

Hallo,

heute morgen ist VZlogger bei mir plötzlich ausgestiegen und lässt sich auch
nicht wieder starten. Es wurden keine Änderungen vorgenommen. Das System
lief lange Zeit stabil.

[Apr 30 05:43:27][main] vzlogger v0.8.0 based on heads/master-0-g8d06176360
from Sat, 18 Jan 2020 09:23:08 +0100 started.

[Apr 30 05:43:27][push] Ignoring push entry due to empty array or duplicate
section

[Apr 30 05:43:27][s0]   unknown option for mmap (). Falling back to normal
gpio.

[Apr 30 05:43:27][main] log level is 1

[Apr 30 05:43:28][]     Startup failed: open direction failed

Ich habe versucht VZlogger manuell wieder zu starten und auch einen reboot
des Raspis durchgeführt ohne Erfolg:

[Apr 30 20:48:26][main] vzlogger v0.8.0 based on heads/master-0-g8d06176360
from Sat, 18 Jan 2020 09:23:08 +0100 started.

[Apr 30 20:48:26][push] Ignoring push entry due to empty array or duplicate
section

[Apr 30 20:48:26][mtr0] Creating new meter with protocol s0.

[Apr 30 20:48:26][s0]   unknown option for mmap (). Falling back to normal
gpio.

[Apr 30 20:48:26][mtr0] Meter configured, enabled.

[Apr 30 20:48:26]       New meter initialized (protocol=s0)

[Apr 30 20:48:26]       Configure channel.

[Apr 30 20:48:26][chn0] New channel initialized (uuid=...1ba5b0
api=volkszaehler id=Impulse)

[Apr 30 20:48:26][mtr1] Creating new meter with protocol s0.

[Apr 30 20:48:26][s0]   unknown option for mmap (). Falling back to normal
gpio.

[Apr 30 20:48:26][mtr1] Meter configured, enabled.

[Apr 30 20:48:26]       New meter initialized (protocol=s0)

[Apr 30 20:48:26]       Configure channel.

[Apr 30 20:48:26][chn1] New channel initialized (uuid=...422d2a
api=volkszaehler id=Impulse)

[Apr 30 20:48:26][mtr2] Creating new meter with protocol s0.

[Apr 30 20:48:26][s0]   unknown option for mmap (). Falling back to normal
gpio.

[Apr 30 20:48:26][mtr2] Meter configured, enabled.

[Apr 30 20:48:26]       New meter initialized (protocol=s0)

[Apr 30 20:48:26]       Configure channel.

[Apr 30 20:48:26][chn2] New channel initialized (uuid=...558970
api=volkszaehler id=Impulse)

[Apr 30 20:48:26][mtr3] Creating new meter with protocol exec.

[Apr 30 20:48:26][exec] MeterExec::MeterExec: Parsed format string "$t: $i =
$v" => "%3$lf: %2$ms = %1$lf"

[Apr 30 20:48:26][mtr3] Meter configured, enabled.

[Apr 30 20:48:26]       New meter initialized (protocol=exec)

[Apr 30 20:48:26]       Configure channel.

[Apr 30 20:48:26][chn3] New channel initialized (uuid=...0fd740
api=volkszaehler id=power)

[Apr 30 20:48:26][mtr4] Creating new meter with protocol exec.

[Apr 30 20:48:26][exec] MeterExec::MeterExec: Parsed format string "$t: $i =
$v" => "%3$lf: %2$ms = %1$lf"

[Apr 30 20:48:26][mtr4] Meter configured, enabled.

[Apr 30 20:48:26]       New meter initialized (protocol=exec)

[Apr 30 20:48:26]       Configure channel.

[Apr 30 20:48:26][chn4] New channel initialized (uuid=...0ba673
api=volkszaehler id=temp)

[Apr 30 20:48:26][mtr5] Creating new meter with protocol sml.

[Apr 30 20:48:26][sml]  pullseq len:0 found

[Apr 30 20:48:26][mtr5] Meter configured, enabled.

[Apr 30 20:48:26]       New meter initialized (protocol=sml)

[Apr 30 20:48:26]       Configure channel.

[Apr 30 20:48:26][chn5] New channel initialized (uuid=...d3ccbe
api=volkszaehler id=1-0:16.7.0)

[Apr 30 20:48:26]       Have 6 meters.

[Apr 30 20:48:26][main] log level is 15

[Apr 30 20:48:26][main] daemon=1, local=0

[Apr 30 20:48:26]       Daemonize process...

[Apr 30 20:48:26]       Opened logfile /var/log/vzlogger.log

[Apr 30 20:48:26][push] No pushDataServer defined.

[Apr 30 20:48:26][]     ===> Start meters

[Apr 30 20:48:26][s0]   counter_thread created

[Apr 30 20:48:26][s0]   Counter thread started with blocking hwif

[Apr 30 20:48:26][mtr0] Meter connection established

[Apr 30 20:48:26][mtr0] Meter thread started

[Apr 30 20:48:26][mtr0] Meter is opened. Starting channels.

[Apr 30 20:48:26][mtr0] Number of readers: 4

[Apr 30 20:48:26][mtr0] Config.daemon: 1

[Apr 30 20:48:26][mtr0] Config.local: 0

[Apr 30 20:48:26][chn0] Start logging thread for volkszaehler-api. Running
as daemon: yes

[Apr 30 20:48:26][chn0] Logging thread started

[Apr 30 20:48:26][chn0] Using default volkszaehler api.

[Apr 30 20:48:26][s0]   counter_thread created

[Apr 30 20:48:26][s0]   Counter thread started with blocking hwif

[Apr 30 20:48:26][mtr1] Meter connection established

[Apr 30 20:48:26][mtr1] Meter thread started

[Apr 30 20:48:26][mtr1] Meter is opened. Starting channels.

[Apr 30 20:48:26][chn1] Logging thread started

[Apr 30 20:48:26][chn1] Start logging thread for volkszaehler-api. Running
as daemon: yes

[Apr 30 20:48:26][chn1] Using default volkszaehler api.

[Apr 30 20:48:26][mtr1] Number of readers: 4

[Apr 30 20:48:26][mtr1] Config.daemon: 1

[Apr 30 20:48:26][mtr1] Config.local: 0

[Apr 30 20:48:26][]     Startup failed: open direction failed

Ich kann selbst bei verbosity = 15 nicht erkennen wo da etwas hängt.

Kann mir jemand weiterhelfen?

Grüße

Micha

-------------- nächster Teil --------------
Ein Dateianhang mit HTML-Daten wurde abgetrennt...
URL: <http://demo.volkszaehler.org/pipermail/volkszaehler-users/attachments/20220430/7cfc2a2b/attachment-0001.html>