[vz-users] Push-Server sendet keine Null-Werte
applicationMGR ecoCuyo
applicationMGR at ecoCuyo.de
So Apr 9 19:32:32 CEST 2023
Hallo Daniel,
der Installationsvorgang bleibt leider hängen. Es liefen zwar "88 Tests 0 Failures 0 Ignored OK“ durch, doch dann kommen ab make[2]: Verzeichnis „/home/pi/vzlogger/libs/libmbus/bin“ lauter Warnungen. Schließlich kommen nach [ 29%] Building CXX object src/CMakeFiles/vz.dir/Channel.cpp.o
noch ein paar Warnungen und dann steht das ganze seit Stunden und wartet auf etwas.
Hast Du einen Tipp für mich?
Viele Grüße
Armin
$ ps -efl |grep -i install
4 S root 9932 9931 0 80 0 - 1974 - 17:53 pts/0 00:00:00 /bin/bash ./install.sh
%CPU(s): 1,2 us, 4,7 sy, 0,0 ni, 0,0 id, 93,9 wa, 0,0 hi, 0,3 si, 0,0 st
$ sudo ./install.sh
vzlogger installation script
checking prerequisites: grep pidof git cmake pkg-config autoreconf
vzlogger setup...
checking for vzlogger folder
. folder: /home/pi/vzlogger/.
checking for libraries
/home/pi/vzlogger/libs /home/pi/vzlogger
checking for libjson
json-c folder: /home/pi/vzlogger/libs/json-c
remote: Enumerating objects: 211, done.
remote: Counting objects: 100% (211/211), done.
remote: Compressing objects: 100% (105/105), done.
remote: Total 211 (delta 113), reused 164 (delta 106), pack-reused 0
Empfange Objekte: 100% (211/211), 127.25 KiB | 1.51 MiB/s, fertig.
Löse Unterschiede auf: 100% (113/113), abgeschlossen mit 10 lokalen Objekten.
Von https://github.com/json-c/json-c
294efec..aff2b83 gh-pages -> origin/gh-pages
f2fc1ca..d0f32a5 master -> origin/master
checking for libsml
libsml folder: /home/pi/vzlogger/libs/libsml
checking for libmbus
libmbus folder: /home/pi/vzlogger/libs/libmbus
building and installing libraries
building and installing libjson
/home/pi/vzlogger/libs/json-c /home/pi/vzlogger/libs /home/pi/vzlogger
make all-recursive
make[1]: Verzeichnis „/home/pi/vzlogger/libs/json-c“ wird betreten
Making all in .
make[2]: Verzeichnis „/home/pi/vzlogger/libs/json-c“ wird betreten
/bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT arraylist.lo -MD -MP -MF .deps/arraylist.Tpo -c -o arraylist.lo arraylist.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT arraylist.lo -MD -MP -MF .deps/arraylist.Tpo -c arraylist.c -fPIC -DPIC -o .libs/arraylist.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT arraylist.lo -MD -MP -MF .deps/arraylist.Tpo -c arraylist.c -o arraylist.o >/dev/null 2>&1
mv -f .deps/arraylist.Tpo .deps/arraylist.Plo
/bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT debug.lo -MD -MP -MF .deps/debug.Tpo -c -o debug.lo debug.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT debug.lo -MD -MP -MF .deps/debug.Tpo -c debug.c -fPIC -DPIC -o .libs/debug.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT debug.lo -MD -MP -MF .deps/debug.Tpo -c debug.c -o debug.o >/dev/null 2>&1
mv -f .deps/debug.Tpo .deps/debug.Plo
/bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT json_c_version.lo -MD -MP -MF .deps/json_c_version.Tpo -c -o json_c_version.lo json_c_version.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT json_c_version.lo -MD -MP -MF .deps/json_c_version.Tpo -c json_c_version.c -fPIC -DPIC -o .libs/json_c_version.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT json_c_version.lo -MD -MP -MF .deps/json_c_version.Tpo -c json_c_version.c -o json_c_version.o >/dev/null 2>&1
mv -f .deps/json_c_version.Tpo .deps/json_c_version.Plo
/bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT json_object.lo -MD -MP -MF .deps/json_object.Tpo -c -o json_object.lo json_object.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT json_object.lo -MD -MP -MF .deps/json_object.Tpo -c json_object.c -fPIC -DPIC -o .libs/json_object.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT json_object.lo -MD -MP -MF .deps/json_object.Tpo -c json_object.c -o json_object.o >/dev/null 2>&1
mv -f .deps/json_object.Tpo .deps/json_object.Plo
/bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT json_object_iterator.lo -MD -MP -MF .deps/json_object_iterator.Tpo -c -o json_object_iterator.lo json_object_iterator.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT json_object_iterator.lo -MD -MP -MF .deps/json_object_iterator.Tpo -c json_object_iterator.c -fPIC -DPIC -o .libs/json_object_iterator.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT json_object_iterator.lo -MD -MP -MF .deps/json_object_iterator.Tpo -c json_object_iterator.c -o json_object_iterator.o >/dev/null 2>&1
mv -f .deps/json_object_iterator.Tpo .deps/json_object_iterator.Plo
/bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT json_tokener.lo -MD -MP -MF .deps/json_tokener.Tpo -c -o json_tokener.lo json_tokener.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT json_tokener.lo -MD -MP -MF .deps/json_tokener.Tpo -c json_tokener.c -fPIC -DPIC -o .libs/json_tokener.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT json_tokener.lo -MD -MP -MF .deps/json_tokener.Tpo -c json_tokener.c -o json_tokener.o >/dev/null 2>&1
mv -f .deps/json_tokener.Tpo .deps/json_tokener.Plo
/bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT json_util.lo -MD -MP -MF .deps/json_util.Tpo -c -o json_util.lo json_util.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT json_util.lo -MD -MP -MF .deps/json_util.Tpo -c json_util.c -fPIC -DPIC -o .libs/json_util.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT json_util.lo -MD -MP -MF .deps/json_util.Tpo -c json_util.c -o json_util.o >/dev/null 2>&1
mv -f .deps/json_util.Tpo .deps/json_util.Plo
/bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT linkhash.lo -MD -MP -MF .deps/linkhash.Tpo -c -o linkhash.lo linkhash.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT linkhash.lo -MD -MP -MF .deps/linkhash.Tpo -c linkhash.c -fPIC -DPIC -o .libs/linkhash.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT linkhash.lo -MD -MP -MF .deps/linkhash.Tpo -c linkhash.c -o linkhash.o >/dev/null 2>&1
mv -f .deps/linkhash.Tpo .deps/linkhash.Plo
/bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT printbuf.lo -MD -MP -MF .deps/printbuf.Tpo -c -o printbuf.lo printbuf.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT printbuf.lo -MD -MP -MF .deps/printbuf.Tpo -c printbuf.c -fPIC -DPIC -o .libs/printbuf.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT printbuf.lo -MD -MP -MF .deps/printbuf.Tpo -c printbuf.c -o printbuf.o >/dev/null 2>&1
mv -f .deps/printbuf.Tpo .deps/printbuf.Plo
/bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT random_seed.lo -MD -MP -MF .deps/random_seed.Tpo -c -o random_seed.lo random_seed.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT random_seed.lo -MD -MP -MF .deps/random_seed.Tpo -c random_seed.c -fPIC -DPIC -o .libs/random_seed.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -MT random_seed.lo -MD -MP -MF .deps/random_seed.Tpo -c random_seed.c -o random_seed.o >/dev/null 2>&1
mv -f .deps/random_seed.Tpo .deps/random_seed.Plo
/bin/bash ./libtool --tag=CC --mode=link gcc -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT -g -O2 -version-info 2:2:0 -no-undefined -Wl,-Bsymbolic-functions -o libjson-c.la -rpath /usr/local/lib arraylist.lo debug.lo json_c_version.lo json_object.lo json_object_iterator.lo json_tokener.lo json_util.lo linkhash.lo printbuf.lo random_seed.lo
libtool: link: rm -fr .libs/libjson-c.a .libs/libjson-c.la .libs/libjson-c.lai .libs/libjson-c.so .libs/libjson-c.so.2 .libs/libjson-c.so.2.0.2
libtool: link: gcc -shared -fPIC -DPIC .libs/arraylist.o .libs/debug.o .libs/json_c_version.o .libs/json_object.o .libs/json_object_iterator.o .libs/json_tokener.o .libs/json_util.o .libs/linkhash.o .libs/printbuf.o .libs/random_seed.o -g -O2 -Wl,-Bsymbolic-functions -Wl,-soname -Wl,libjson-c.so.2 -o .libs/libjson-c.so.2.0.2
libtool: link: (cd ".libs" && rm -f "libjson-c.so.2" && ln -s "libjson-c.so.2.0.2" "libjson-c.so.2")
libtool: link: (cd ".libs" && rm -f "libjson-c.so" && ln -s "libjson-c.so.2.0.2" "libjson-c.so")
libtool: link: ar cr .libs/libjson-c.a arraylist.o debug.o json_c_version.o json_object.o json_object_iterator.o json_tokener.o json_util.o linkhash.o printbuf.o random_seed.o
libtool: link: ranlib .libs/libjson-c.a
libtool: link: ( cd ".libs" && rm -f "libjson-c.la" && ln -s "../libjson-c.la" "libjson-c.la" )
make[2]: Verzeichnis „/home/pi/vzlogger/libs/json-c“ wird verlassen
Making all in tests
make[2]: Verzeichnis „/home/pi/vzlogger/libs/json-c/tests“ wird betreten
make[2]: Für das Ziel „all“ ist nichts zu tun.
make[2]: Verzeichnis „/home/pi/vzlogger/libs/json-c/tests“ wird verlassen
make[1]: Verzeichnis „/home/pi/vzlogger/libs/json-c“ wird verlassen
Making install in .
make[1]: Verzeichnis „/home/pi/vzlogger/libs/json-c“ wird betreten
make[2]: Verzeichnis „/home/pi/vzlogger/libs/json-c“ wird betreten
/usr/bin/mkdir -p '/usr/local/lib'
/bin/bash ./libtool --mode=install /usr/bin/install -c libjson-c.la '/usr/local/lib'
libtool: install: /usr/bin/install -c .libs/libjson-c.so.2.0.2 /usr/local/lib/libjson-c.so.2.0.2
libtool: install: (cd /usr/local/lib && { ln -s -f libjson-c.so.2.0.2 libjson-c.so.2 || { rm -f libjson-c.so.2 && ln -s libjson-c.so.2.0.2 libjson-c.so.2; }; })
libtool: install: (cd /usr/local/lib && { ln -s -f libjson-c.so.2.0.2 libjson-c.so || { rm -f libjson-c.so && ln -s libjson-c.so.2.0.2 libjson-c.so; }; })
libtool: install: /usr/bin/install -c .libs/libjson-c.lai /usr/local/lib/libjson-c.la
libtool: install: /usr/bin/install -c .libs/libjson-c.a /usr/local/lib/libjson-c.a
libtool: install: chmod 644 /usr/local/lib/libjson-c.a
libtool: install: ranlib /usr/local/lib/libjson-c.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /usr/local/lib
----------------------------------------------------------------------
Libraries have been installed in:
/usr/local/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
/usr/bin/mkdir -p '/usr/local/include/json-c'
/usr/bin/install -c -m 644 arraylist.h bits.h debug.h json.h json_config.h json_c_version.h json_inttypes.h json_object.h json_object_iterator.h json_object_private.h json_tokener.h json_util.h linkhash.h printbuf.h random_seed.h '/usr/local/include/json-c'
/usr/bin/mkdir -p '/usr/local/lib/pkgconfig'
/usr/bin/install -c -m 644 json-c.pc '/usr/local/lib/pkgconfig'
make[2]: Verzeichnis „/home/pi/vzlogger/libs/json-c“ wird verlassen
make[1]: Verzeichnis „/home/pi/vzlogger/libs/json-c“ wird verlassen
Making install in tests
make[1]: Verzeichnis „/home/pi/vzlogger/libs/json-c/tests“ wird betreten
make[2]: Verzeichnis „/home/pi/vzlogger/libs/json-c/tests“ wird betreten
make[2]: Für das Ziel „install-exec-am“ ist nichts zu tun.
make[2]: Für das Ziel „install-data-am“ ist nichts zu tun.
make[2]: Verzeichnis „/home/pi/vzlogger/libs/json-c/tests“ wird verlassen
make[1]: Verzeichnis „/home/pi/vzlogger/libs/json-c/tests“ wird verlassen
/home/pi/vzlogger/libs /home/pi/vzlogger
building and installing libsml
/home/pi/vzlogger/libs/libsml /home/pi/vzlogger/libs /home/pi/vzlogger
make[1]: Verzeichnis „/home/pi/vzlogger/libs/libsml/sml“ wird betreten
make[1]: Für das Ziel „all“ ist nichts zu tun.
make[1]: Verzeichnis „/home/pi/vzlogger/libs/libsml/sml“ wird verlassen
make[1]: Verzeichnis „/home/pi/vzlogger/libs/libsml/examples“ wird betreten
make[1]: Für das Ziel „all“ ist nichts zu tun.
make[1]: Verzeichnis „/home/pi/vzlogger/libs/libsml/examples“ wird verlassen
make[1]: Verzeichnis „/home/pi/vzlogger/libs/libsml/test“ wird betreten
make[2]: Verzeichnis „/home/pi/vzlogger/libs/libsml/sml“ wird betreten
make[2]: Für das Ziel „all“ ist nichts zu tun.
make[2]: Verzeichnis „/home/pi/vzlogger/libs/libsml/sml“ wird verlassen
Unity test run 1 of 1
libsml: sml_message_parse(): crc mismatch, dropping message
libsml: error: message type 0900 not yet implemented
libsml: NYI: sml_message_body_free for message type 0900
libsml: warning: could not read the whole file
........................................................................................
-----------------------
88 Tests 0 Failures 0 Ignored
OK
make[1]: Verzeichnis „/home/pi/vzlogger/libs/libsml/test“ wird verlassen
/home/pi/vzlogger/libs /home/pi/vzlogger
building and installing libmbus
/home/pi/vzlogger/libs/libmbus /home/pi/vzlogger/libs /home/pi/vzlogger
make all-recursive
make[1]: Verzeichnis „/home/pi/vzlogger/libs/libmbus“ wird betreten
Making all in mbus
make[2]: Verzeichnis „/home/pi/vzlogger/libs/libmbus/mbus“ wird betreten
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -g -O2 -MT mbus.lo -MD -MP -MF .deps/mbus.Tpo -c -o mbus.lo mbus.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -g -O2 -MT mbus.lo -MD -MP -MF .deps/mbus.Tpo -c mbus.c -fPIC -DPIC -o .libs/mbus.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -g -O2 -MT mbus.lo -MD -MP -MF .deps/mbus.Tpo -c mbus.c -o mbus.o >/dev/null 2>&1
mv -f .deps/mbus.Tpo .deps/mbus.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -g -O2 -MT mbus-protocol.lo -MD -MP -MF .deps/mbus-protocol.Tpo -c -o mbus-protocol.lo mbus-protocol.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -g -O2 -MT mbus-protocol.lo -MD -MP -MF .deps/mbus-protocol.Tpo -c mbus-protocol.c -fPIC -DPIC -o .libs/mbus-protocol.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -g -O2 -MT mbus-protocol.lo -MD -MP -MF .deps/mbus-protocol.Tpo -c mbus-protocol.c -o mbus-protocol.o >/dev/null 2>&1
mv -f .deps/mbus-protocol.Tpo .deps/mbus-protocol.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -g -O2 -MT mbus-tcp.lo -MD -MP -MF .deps/mbus-tcp.Tpo -c -o mbus-tcp.lo mbus-tcp.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -g -O2 -MT mbus-tcp.lo -MD -MP -MF .deps/mbus-tcp.Tpo -c mbus-tcp.c -fPIC -DPIC -o .libs/mbus-tcp.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -g -O2 -MT mbus-tcp.lo -MD -MP -MF .deps/mbus-tcp.Tpo -c mbus-tcp.c -o mbus-tcp.o >/dev/null 2>&1
mv -f .deps/mbus-tcp.Tpo .deps/mbus-tcp.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -g -O2 -MT mbus-serial.lo -MD -MP -MF .deps/mbus-serial.Tpo -c -o mbus-serial.lo mbus-serial.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -g -O2 -MT mbus-serial.lo -MD -MP -MF .deps/mbus-serial.Tpo -c mbus-serial.c -fPIC -DPIC -o .libs/mbus-serial.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -g -O2 -MT mbus-serial.lo -MD -MP -MF .deps/mbus-serial.Tpo -c mbus-serial.c -o mbus-serial.o >/dev/null 2>&1
mv -f .deps/mbus-serial.Tpo .deps/mbus-serial.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -g -O2 -MT mbus-protocol-aux.lo -MD -MP -MF .deps/mbus-protocol-aux.Tpo -c -o mbus-protocol-aux.lo mbus-protocol-aux.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -g -O2 -MT mbus-protocol-aux.lo -MD -MP -MF .deps/mbus-protocol-aux.Tpo -c mbus-protocol-aux.c -fPIC -DPIC -o .libs/mbus-protocol-aux.o
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -g -O2 -MT mbus-protocol-aux.lo -MD -MP -MF .deps/mbus-protocol-aux.Tpo -c mbus-protocol-aux.c -o mbus-protocol-aux.o >/dev/null 2>&1
mv -f .deps/mbus-protocol-aux.Tpo .deps/mbus-protocol-aux.Plo
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -version-info 0:9:0 -o libmbus.la -rpath /usr/local/lib mbus.lo mbus-protocol.lo mbus-tcp.lo mbus-serial.lo mbus-protocol-aux.lo
libtool: link: rm -fr .libs/libmbus.a .libs/libmbus.la .libs/libmbus.lai .libs/libmbus.so .libs/libmbus.so.0 .libs/libmbus.so.0.0.9
libtool: link: gcc -shared -fPIC -DPIC .libs/mbus.o .libs/mbus-protocol.o .libs/mbus-tcp.o .libs/mbus-serial.o .libs/mbus-protocol-aux.o -g -O2 -Wl,-soname -Wl,libmbus.so.0 -o .libs/libmbus.so.0.0.9
libtool: link: (cd ".libs" && rm -f "libmbus.so.0" && ln -s "libmbus.so.0.0.9" "libmbus.so.0")
libtool: link: (cd ".libs" && rm -f "libmbus.so" && ln -s "libmbus.so.0.0.9" "libmbus.so")
libtool: link: ar cr .libs/libmbus.a mbus.o mbus-protocol.o mbus-tcp.o mbus-serial.o mbus-protocol-aux.o
libtool: link: ranlib .libs/libmbus.a
libtool: link: ( cd ".libs" && rm -f "libmbus.la" && ln -s "../libmbus.la" "libmbus.la" )
make[2]: Verzeichnis „/home/pi/vzlogger/libs/libmbus/mbus“ wird verlassen
Making all in bin
make[2]: Verzeichnis „/home/pi/vzlogger/libs/libmbus/bin“ wird betreten
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I../src -g -O2 -MT mbus-tcp-scan.o -MD -MP -MF .deps/mbus-tcp-scan.Tpo -c -o mbus-tcp-scan.o mbus-tcp-scan.c
mv -f .deps/mbus-tcp-scan.Tpo .deps/mbus-tcp-scan.Po
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -L../mbus -version-info 0:9:0 -o mbus-tcp-scan mbus-tcp-scan.o -lmbus -lm
libtool: warning: '-version-info' is ignored for programs
libtool: link: gcc -g -O2 -o .libs/mbus-tcp-scan mbus-tcp-scan.o -L../mbus /home/pi/vzlogger/libs/libmbus/mbus/.libs/libmbus.so -lm
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I../src -g -O2 -MT mbus-tcp-request-data.o -MD -MP -MF .deps/mbus-tcp-request-data.Tpo -c -o mbus-tcp-request-data.o mbus-tcp-request-data.c
mv -f .deps/mbus-tcp-request-data.Tpo .deps/mbus-tcp-request-data.Po
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -L../mbus -version-info 0:9:0 -o mbus-tcp-request-data mbus-tcp-request-data.o -lmbus -lm
libtool: warning: '-version-info' is ignored for programs
libtool: link: gcc -g -O2 -o .libs/mbus-tcp-request-data mbus-tcp-request-data.o -L../mbus /home/pi/vzlogger/libs/libmbus/mbus/.libs/libmbus.so -lm
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I../src -g -O2 -MT mbus-tcp-request-data-multi-reply.o -MD -MP -MF .deps/mbus-tcp-request-data-multi-reply.Tpo -c -o mbus-tcp-request-data-multi-reply.o mbus-tcp-request-data-multi-reply.c
mv -f .deps/mbus-tcp-request-data-multi-reply.Tpo .deps/mbus-tcp-request-data-multi-reply.Po
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -L../mbus -version-info 0:9:0 -o mbus-tcp-request-data-multi-reply mbus-tcp-request-data-multi-reply.o -lmbus -lm
libtool: warning: '-version-info' is ignored for programs
libtool: link: gcc -g -O2 -o .libs/mbus-tcp-request-data-multi-reply mbus-tcp-request-data-multi-reply.o -L../mbus /home/pi/vzlogger/libs/libmbus/mbus/.libs/libmbus.so -lm
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I../src -g -O2 -MT mbus-tcp-select-secondary.o -MD -MP -MF .deps/mbus-tcp-select-secondary.Tpo -c -o mbus-tcp-select-secondary.o mbus-tcp-select-secondary.c
mv -f .deps/mbus-tcp-select-secondary.Tpo .deps/mbus-tcp-select-secondary.Po
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -L../mbus -version-info 0:9:0 -o mbus-tcp-select-secondary mbus-tcp-select-secondary.o -lmbus -lm
libtool: warning: '-version-info' is ignored for programs
libtool: link: gcc -g -O2 -o .libs/mbus-tcp-select-secondary mbus-tcp-select-secondary.o -L../mbus /home/pi/vzlogger/libs/libmbus/mbus/.libs/libmbus.so -lm
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I../src -g -O2 -MT mbus-tcp-scan-secondary.o -MD -MP -MF .deps/mbus-tcp-scan-secondary.Tpo -c -o mbus-tcp-scan-secondary.o mbus-tcp-scan-secondary.c
mv -f .deps/mbus-tcp-scan-secondary.Tpo .deps/mbus-tcp-scan-secondary.Po
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -L../mbus -version-info 0:9:0 -o mbus-tcp-scan-secondary mbus-tcp-scan-secondary.o -lmbus -lm
libtool: warning: '-version-info' is ignored for programs
libtool: link: gcc -g -O2 -o .libs/mbus-tcp-scan-secondary mbus-tcp-scan-secondary.o -L../mbus /home/pi/vzlogger/libs/libmbus/mbus/.libs/libmbus.so -lm
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I../src -g -O2 -MT mbus-serial-scan.o -MD -MP -MF .deps/mbus-serial-scan.Tpo -c -o mbus-serial-scan.o mbus-serial-scan.c
mv -f .deps/mbus-serial-scan.Tpo .deps/mbus-serial-scan.Po
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -L../mbus -version-info 0:9:0 -o mbus-serial-scan mbus-serial-scan.o -lmbus -lm
libtool: warning: '-version-info' is ignored for programs
libtool: link: gcc -g -O2 -o .libs/mbus-serial-scan mbus-serial-scan.o -L../mbus /home/pi/vzlogger/libs/libmbus/mbus/.libs/libmbus.so -lm
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I../src -g -O2 -MT mbus-serial-request-data.o -MD -MP -MF .deps/mbus-serial-request-data.Tpo -c -o mbus-serial-request-data.o mbus-serial-request-data.c
mv -f .deps/mbus-serial-request-data.Tpo .deps/mbus-serial-request-data.Po
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -L../mbus -version-info 0:9:0 -o mbus-serial-request-data mbus-serial-request-data.o -lmbus -lm
libtool: warning: '-version-info' is ignored for programs
libtool: link: gcc -g -O2 -o .libs/mbus-serial-request-data mbus-serial-request-data.o -L../mbus /home/pi/vzlogger/libs/libmbus/mbus/.libs/libmbus.so -lm
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I../src -g -O2 -MT mbus-serial-request-data-multi-reply.o -MD -MP -MF .deps/mbus-serial-request-data-multi-reply.Tpo -c -o mbus-serial-request-data-multi-reply.o mbus-serial-request-data-multi-reply.c
mv -f .deps/mbus-serial-request-data-multi-reply.Tpo .deps/mbus-serial-request-data-multi-reply.Po
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -L../mbus -version-info 0:9:0 -o mbus-serial-request-data-multi-reply mbus-serial-request-data-multi-reply.o -lmbus -lm
libtool: warning: '-version-info' is ignored for programs
libtool: link: gcc -g -O2 -o .libs/mbus-serial-request-data-multi-reply mbus-serial-request-data-multi-reply.o -L../mbus /home/pi/vzlogger/libs/libmbus/mbus/.libs/libmbus.so -lm
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I../src -g -O2 -MT mbus-serial-select-secondary.o -MD -MP -MF .deps/mbus-serial-select-secondary.Tpo -c -o mbus-serial-select-secondary.o mbus-serial-select-secondary.c
mv -f .deps/mbus-serial-select-secondary.Tpo .deps/mbus-serial-select-secondary.Po
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -L../mbus -version-info 0:9:0 -o mbus-serial-select-secondary mbus-serial-select-secondary.o -lmbus -lm
libtool: warning: '-version-info' is ignored for programs
libtool: link: gcc -g -O2 -o .libs/mbus-serial-select-secondary mbus-serial-select-secondary.o -L../mbus /home/pi/vzlogger/libs/libmbus/mbus/.libs/libmbus.so -lm
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I../src -g -O2 -MT mbus-serial-scan-secondary.o -MD -MP -MF .deps/mbus-serial-scan-secondary.Tpo -c -o mbus-serial-scan-secondary.o mbus-serial-scan-secondary.c
mv -f .deps/mbus-serial-scan-secondary.Tpo .deps/mbus-serial-scan-secondary.Po
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -L../mbus -version-info 0:9:0 -o mbus-serial-scan-secondary mbus-serial-scan-secondary.o -lmbus -lm
libtool: warning: '-version-info' is ignored for programs
libtool: link: gcc -g -O2 -o .libs/mbus-serial-scan-secondary mbus-serial-scan-secondary.o -L../mbus /home/pi/vzlogger/libs/libmbus/mbus/.libs/libmbus.so -lm
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I../src -g -O2 -MT mbus-serial-switch-baudrate.o -MD -MP -MF .deps/mbus-serial-switch-baudrate.Tpo -c -o mbus-serial-switch-baudrate.o mbus-serial-switch-baudrate.c
mv -f .deps/mbus-serial-switch-baudrate.Tpo .deps/mbus-serial-switch-baudrate.Po
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -L../mbus -version-info 0:9:0 -o mbus-serial-switch-baudrate mbus-serial-switch-baudrate.o -lmbus -lm
libtool: warning: '-version-info' is ignored for programs
libtool: link: gcc -g -O2 -o .libs/mbus-serial-switch-baudrate mbus-serial-switch-baudrate.o -L../mbus /home/pi/vzlogger/libs/libmbus/mbus/.libs/libmbus.so -lm
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I../src -g -O2 -MT mbus-tcp-raw-send.o -MD -MP -MF .deps/mbus-tcp-raw-send.Tpo -c -o mbus-tcp-raw-send.o mbus-tcp-raw-send.c
mv -f .deps/mbus-tcp-raw-send.Tpo .deps/mbus-tcp-raw-send.Po
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -L../mbus -version-info 0:9:0 -o mbus-tcp-raw-send mbus-tcp-raw-send.o -lmbus -lm
libtool: warning: '-version-info' is ignored for programs
libtool: link: gcc -g -O2 -o .libs/mbus-tcp-raw-send mbus-tcp-raw-send.o -L../mbus /home/pi/vzlogger/libs/libmbus/mbus/.libs/libmbus.so -lm
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I../src -g -O2 -MT mbus-tcp-application-reset.o -MD -MP -MF .deps/mbus-tcp-application-reset.Tpo -c -o mbus-tcp-application-reset.o mbus-tcp-application-reset.c
mv -f .deps/mbus-tcp-application-reset.Tpo .deps/mbus-tcp-application-reset.Po
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -L../mbus -version-info 0:9:0 -o mbus-tcp-application-reset mbus-tcp-application-reset.o -lmbus -lm
libtool: warning: '-version-info' is ignored for programs
libtool: link: gcc -g -O2 -o .libs/mbus-tcp-application-reset mbus-tcp-application-reset.o -L../mbus /home/pi/vzlogger/libs/libmbus/mbus/.libs/libmbus.so -lm
gcc -DHAVE_CONFIG_H -I. -I.. -I.. -I.. -I../src -g -O2 -MT mbus-serial-set-address.o -MD -MP -MF .deps/mbus-serial-set-address.Tpo -c -o mbus-serial-set-address.o mbus-serial-set-address.c
mv -f .deps/mbus-serial-set-address.Tpo .deps/mbus-serial-set-address.Po
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -L../mbus -version-info 0:9:0 -o mbus-serial-set-address mbus-serial-set-address.o -lmbus -lm
libtool: warning: '-version-info' is ignored for programs
libtool: link: gcc -g -O2 -o .libs/mbus-serial-set-address mbus-serial-set-address.o -L../mbus /home/pi/vzlogger/libs/libmbus/mbus/.libs/libmbus.so -lm
make[2]: Verzeichnis „/home/pi/vzlogger/libs/libmbus/bin“ wird verlassen
make[2]: Verzeichnis „/home/pi/vzlogger/libs/libmbus“ wird betreten
make[2]: Verzeichnis „/home/pi/vzlogger/libs/libmbus“ wird verlassen
make[1]: Verzeichnis „/home/pi/vzlogger/libs/libmbus“ wird verlassen
Making install in mbus
make[1]: Verzeichnis „/home/pi/vzlogger/libs/libmbus/mbus“ wird betreten
make[2]: Verzeichnis „/home/pi/vzlogger/libs/libmbus/mbus“ wird betreten
/usr/bin/mkdir -p '/usr/local/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libmbus.la '/usr/local/lib'
libtool: install: /usr/bin/install -c .libs/libmbus.so.0.0.9 /usr/local/lib/libmbus.so.0.0.9
libtool: install: (cd /usr/local/lib && { ln -s -f libmbus.so.0.0.9 libmbus.so.0 || { rm -f libmbus.so.0 && ln -s libmbus.so.0.0.9 libmbus.so.0; }; })
libtool: install: (cd /usr/local/lib && { ln -s -f libmbus.so.0.0.9 libmbus.so || { rm -f libmbus.so && ln -s libmbus.so.0.0.9 libmbus.so; }; })
libtool: install: /usr/bin/install -c .libs/libmbus.lai /usr/local/lib/libmbus.la
libtool: install: /usr/bin/install -c .libs/libmbus.a /usr/local/lib/libmbus.a
libtool: install: chmod 644 /usr/local/lib/libmbus.a
libtool: install: ranlib /usr/local/lib/libmbus.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /usr/local/lib
----------------------------------------------------------------------
Libraries have been installed in:
/usr/local/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
/usr/bin/mkdir -p '/usr/local/include/mbus'
/usr/bin/install -c -m 644 mbus.h mbus-protocol.h mbus-tcp.h mbus-serial.h mbus-protocol-aux.h '/usr/local/include/mbus'
make[2]: Verzeichnis „/home/pi/vzlogger/libs/libmbus/mbus“ wird verlassen
make[1]: Verzeichnis „/home/pi/vzlogger/libs/libmbus/mbus“ wird verlassen
Making install in bin
make[1]: Verzeichnis „/home/pi/vzlogger/libs/libmbus/bin“ wird betreten
make[2]: Verzeichnis „/home/pi/vzlogger/libs/libmbus/bin“ wird betreten
/usr/bin/mkdir -p '/usr/local/bin'
/bin/bash ../libtool --mode=install /usr/bin/install -c mbus-tcp-scan mbus-tcp-request-data mbus-tcp-request-data-multi-reply mbus-tcp-select-secondary mbus-tcp-scan-secondary mbus-serial-scan mbus-serial-request-data mbus-serial-request-data-multi-reply mbus-serial-select-secondary mbus-serial-scan-secondary mbus-serial-switch-baudrate mbus-tcp-raw-send mbus-tcp-application-reset mbus-serial-set-address '/usr/local/bin'
libtool: install: /usr/bin/install -c .libs/mbus-tcp-scan /usr/local/bin/mbus-tcp-scan
libtool: install: /usr/bin/install -c .libs/mbus-tcp-request-data /usr/local/bin/mbus-tcp-request-data
libtool: install: /usr/bin/install -c .libs/mbus-tcp-request-data-multi-reply /usr/local/bin/mbus-tcp-request-data-multi-reply
libtool: install: /usr/bin/install -c .libs/mbus-tcp-select-secondary /usr/local/bin/mbus-tcp-select-secondary
libtool: install: /usr/bin/install -c .libs/mbus-tcp-scan-secondary /usr/local/bin/mbus-tcp-scan-secondary
libtool: install: /usr/bin/install -c .libs/mbus-serial-scan /usr/local/bin/mbus-serial-scan
libtool: install: /usr/bin/install -c .libs/mbus-serial-request-data /usr/local/bin/mbus-serial-request-data
libtool: install: /usr/bin/install -c .libs/mbus-serial-request-data-multi-reply /usr/local/bin/mbus-serial-request-data-multi-reply
libtool: install: /usr/bin/install -c .libs/mbus-serial-select-secondary /usr/local/bin/mbus-serial-select-secondary
libtool: install: /usr/bin/install -c .libs/mbus-serial-scan-secondary /usr/local/bin/mbus-serial-scan-secondary
libtool: install: /usr/bin/install -c .libs/mbus-serial-switch-baudrate /usr/local/bin/mbus-serial-switch-baudrate
libtool: install: /usr/bin/install -c .libs/mbus-tcp-raw-send /usr/local/bin/mbus-tcp-raw-send
libtool: install: /usr/bin/install -c .libs/mbus-tcp-application-reset /usr/local/bin/mbus-tcp-application-reset
libtool: install: /usr/bin/install -c .libs/mbus-serial-set-address /usr/local/bin/mbus-serial-set-address
/usr/bin/mkdir -p '/usr/local/share/man/man1'
/usr/bin/install -c -m 644 libmbus.1 mbus-tcp-scan.1 mbus-tcp-request-data.1 mbus-tcp-request-data-multi-reply.1 mbus-tcp-select-secondary.1 mbus-tcp-scan-secondary.1 mbus-tcp-raw-send.1 mbus-serial-scan.1 mbus-serial-request-data.1 mbus-serial-request-data-multi-reply.1 mbus-serial-select-secondary.1 mbus-serial-scan-secondary.1 mbus-serial-switch-baudrate.1 '/usr/local/share/man/man1'
make[2]: Verzeichnis „/home/pi/vzlogger/libs/libmbus/bin“ wird verlassen
make[1]: Verzeichnis „/home/pi/vzlogger/libs/libmbus/bin“ wird verlassen
make[1]: Verzeichnis „/home/pi/vzlogger/libs/libmbus“ wird betreten
make[2]: Verzeichnis „/home/pi/vzlogger/libs/libmbus“ wird betreten
make[2]: Für das Ziel „install-exec-am“ ist nichts zu tun.
/usr/bin/mkdir -p '/usr/local/share/doc/libmbus-0.9.0'
/usr/bin/install -c -m 644 README.md COPYING hardware/MBus_USB.pdf hardware/MBus_USB.txt '/usr/local/share/doc/libmbus-0.9.0'
/usr/bin/mkdir -p '/usr/local/lib/pkgconfig'
/usr/bin/install -c -m 644 libmbus.pc '/usr/local/lib/pkgconfig'
make[2]: Verzeichnis „/home/pi/vzlogger/libs/libmbus“ wird verlassen
make[1]: Verzeichnis „/home/pi/vzlogger/libs/libmbus“ wird verlassen
/home/pi/vzlogger/libs /home/pi/vzlogger
/home/pi/vzlogger
building and installing vzlogger
/home/pi/vzlogger/build /home/pi/vzlogger
building vzlogger
CMake Warning (dev) at CMakeLists.txt:2 (project):
Policy CMP0048 is not set: project() command manages VERSION variables.
Run "cmake --help-policy CMP0048" for policy details. Use the cmake_policy
command to set the policy and suppress this warning.
The following variable(s) would be set to empty:
CMAKE_PROJECT_VERSION
CMAKE_PROJECT_VERSION_MAJOR
CMAKE_PROJECT_VERSION_MINOR
CMAKE_PROJECT_VERSION_PATCH
This warning is for project developers. Use -Wno-dev to suppress it.
Compiling for target ''
-- using gcc compiler GNU
-- checking if -Wno-ignored-qualifiers works
-- FindSml check
-- SML_HOME is not empty: "/home/pi/downloads/libsml"
-- Looking for sml in /home/pi/downloads/libsml
-- FindMBus check
-- Looking for libmbus in /usr/local/include
libmbus found: '/usr/local/include'
-- FindMicrohttpd check
-- Checking for module 'microhttpd>=0.9'
-- No package 'microhttpd' found
-- MICROHTTPD_HOME env is not set, setting it to /usr/local
-- Looking for microhttpd in /usr/local
-- search for libmosquitto returned /usr/lib/arm-linux-gnueabihf/libmosquitto.so and /usr/include
-- libmosquitto found at /usr/lib/arm-linux-gnueabihf/libmosquitto.so
-- FindJson check
-- JSON_HOME env is not set, setting it to /usr/local
-- Looking for json in /usr/local
Json-c search: '/usr/local/include;/usr/local/include;/usr/local/include;/usr/include'
Json-c found: '/usr/local/include'
-- FindGnuTls check
-- ==> ''
-- GNUTLS_HOME env is not set, setting it to /usr/local
-- Looking for gnutls in /usr/local
==> GNUTLS_LIBRARIES='/usr/lib/arm-linux-gnueabihf/libgnutls.a;/usr/lib/arm-linux-gnueabihf/libgmp.a;/usr/lib/arm-linux-gnueabihf/libunistring.a;-latomic;/usr/lib/arm-linux-gnueabihf/libhogweed.a;/usr/lib/arm-linux-gnueabihf/libgmp.a;/usr/lib/arm-linux-gnueabihf/libnettle.a;/usr/lib/arm-linux-gnueabihf/libtasn1.a;/usr/lib/arm-linux-gnueabihf/libidn2.a;/usr/lib/arm-linux-gnueabihf/libunistring.a;-lp11-kit;-lsasl2;-lgcrypt'
***** Configuration parameters *****
prefix: /usr/local
json: -L/usr/local/lib/libjson-c.a;-lrt -I/usr/local/include
sml: -L/usr/lib/libsml.a;-lrt -I/usr/include
microhttpd: -L/usr/lib/arm-linux-gnueabihf/libmicrohttpd.a;-lrt -I/usr/include
mqtt: -L/usr/lib/arm-linux-gnueabihf/libmosquitto.so -I/usr/include
libmbus: -L/usr/local/lib/libmbus.so;-lm -I/usr/local/include
-- Configuring done
-- Generating done
-- Build files have been written to: /home/pi/vzlogger
/usr/bin/cmake -S/home/pi/vzlogger -B/home/pi/vzlogger/build --check-build-system CMakeFiles/Makefile.cmake 0
Compiling for target ''
-- using gcc compiler GNU
-- checking if -Wno-ignored-qualifiers works
-- FindSml check
-- SML_HOME env is not set, setting it to /usr/local
-- Looking for sml in /usr/local
-- FindMBus check
-- Looking for libmbus in /usr/local/include
libmbus found: '/usr/local/include'
-- FindMicrohttpd check
-- Checking for module 'microhttpd>=0.9'
-- No package 'microhttpd' found
-- MICROHTTPD_HOME env is not set, setting it to /usr/local
-- Looking for microhttpd in /usr/local
-- search for libmosquitto returned /usr/lib/arm-linux-gnueabihf/libmosquitto.so and /usr/include
-- libmosquitto found at /usr/lib/arm-linux-gnueabihf/libmosquitto.so
-- FindJson check
-- JSON_HOME env is not set, setting it to /usr/local
-- Looking for json in /usr/local
Json-c search: '/usr/local/include;/usr/local/include;/usr/local/include;/usr/include'
Json-c found: '/usr/local/include'
-- FindGnuTls check
-- ==> ''
-- GNUTLS_HOME env is not set, setting it to /usr/local
-- Looking for gnutls in /usr/local
==> GNUTLS_LIBRARIES='/usr/lib/arm-linux-gnueabihf/libgnutls.a;/usr/lib/arm-linux-gnueabihf/libgmp.a;/usr/lib/arm-linux-gnueabihf/libunistring.a;-latomic;/usr/lib/arm-linux-gnueabihf/libhogweed.a;/usr/lib/arm-linux-gnueabihf/libgmp.a;/usr/lib/arm-linux-gnueabihf/libnettle.a;/usr/lib/arm-linux-gnueabihf/libtasn1.a;/usr/lib/arm-linux-gnueabihf/libidn2.a;/usr/lib/arm-linux-gnueabihf/libunistring.a;-lp11-kit;-lsasl2;-lgcrypt'
***** Configuration parameters *****
prefix: /usr/local
json: -L/usr/local/lib/libjson-c.a;-lrt -I/usr/local/include
sml: -L/usr/lib/libsml.a;-lrt -I/usr/include
microhttpd: -L/usr/lib/arm-linux-gnueabihf/libmicrohttpd.a;-lrt -I/usr/include
mqtt: -L/usr/lib/arm-linux-gnueabihf/libmosquitto.so -I/usr/include
libmbus: -L/usr/local/lib/libmbus.so;-lm -I/usr/local/include
-- Configuring done
-- Generating done
-- Build files have been written to: /home/pi/vzlogger/build
/usr/bin/cmake -E cmake_progress_start /home/pi/vzlogger/build/CMakeFiles /home/pi/vzlogger/build//CMakeFiles/progress.marks
make -f CMakeFiles/Makefile2 all
make[1]: Verzeichnis „/home/pi/vzlogger/build“ wird betreten
make -f src/protocols/CMakeFiles/proto.dir/build.make src/protocols/CMakeFiles/proto.dir/depend
make[2]: Verzeichnis „/home/pi/vzlogger/build“ wird betreten
cd /home/pi/vzlogger/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/pi/vzlogger /home/pi/vzlogger/src/protocols /home/pi/vzlogger/build /home/pi/vzlogger/build/src/protocols /home/pi/vzlogger/build/src/protocols/CMakeFiles/proto.dir/DependInfo.cmake --color=
Scanning dependencies of target proto
make[2]: Verzeichnis „/home/pi/vzlogger/build“ wird verlassen
make -f src/protocols/CMakeFiles/proto.dir/build.make src/protocols/CMakeFiles/proto.dir/build
make[2]: Verzeichnis „/home/pi/vzlogger/build“ wird betreten
[ 2%] Building CXX object src/protocols/CMakeFiles/proto.dir/MeterS0.cpp.o
cd /home/pi/vzlogger/build/src/protocols && /usr/bin/c++ -DHAVE_CONFIG_HPP -I/home/pi/vzlogger/build -I/home/pi/vzlogger/include -I/home/pi/vzlogger -W -Wall -Wextra -Werror -Wnon-virtual-dtor -Wno-system-headers -Wno-deprecated -Wno-deprecated-declarations -Winit-self -Wmissing-include-dirs -Wno-pragmas -Wredundant-decls -Wno-unused-parameter -std=c++11 -fpermissive -Wno-error=redundant-decls -Wno-ignored-qualifiers -g3 -o CMakeFiles/proto.dir/MeterS0.cpp.o -c /home/pi/vzlogger/src/protocols/MeterS0.cpp
[ 5%] Building CXX object src/protocols/CMakeFiles/proto.dir/MeterD0.cpp.o
cd /home/pi/vzlogger/build/src/protocols && /usr/bin/c++ -DHAVE_CONFIG_HPP -I/home/pi/vzlogger/build -I/home/pi/vzlogger/include -I/home/pi/vzlogger -W -Wall -Wextra -Werror -Wnon-virtual-dtor -Wno-system-headers -Wno-deprecated -Wno-deprecated-declarations -Winit-self -Wmissing-include-dirs -Wno-pragmas -Wredundant-decls -Wno-unused-parameter -std=c++11 -fpermissive -Wno-error=redundant-decls -Wno-ignored-qualifiers -g3 -o CMakeFiles/proto.dir/MeterD0.cpp.o -c /home/pi/vzlogger/src/protocols/MeterD0.cpp
[ 8%] Building CXX object src/protocols/CMakeFiles/proto.dir/MeterSML.cpp.o
cd /home/pi/vzlogger/build/src/protocols && /usr/bin/c++ -DHAVE_CONFIG_HPP -I/home/pi/vzlogger/build -I/home/pi/vzlogger/include -I/home/pi/vzlogger -W -Wall -Wextra -Werror -Wnon-virtual-dtor -Wno-system-headers -Wno-deprecated -Wno-deprecated-declarations -Winit-self -Wmissing-include-dirs -Wno-pragmas -Wredundant-decls -Wno-unused-parameter -std=c++11 -fpermissive -Wno-error=redundant-decls -Wno-ignored-qualifiers -g3 -o CMakeFiles/proto.dir/MeterSML.cpp.o -c /home/pi/vzlogger/src/protocols/MeterSML.cpp
[ 10%] Building CXX object src/protocols/CMakeFiles/proto.dir/MeterFluksoV2.cpp.o
cd /home/pi/vzlogger/build/src/protocols && /usr/bin/c++ -DHAVE_CONFIG_HPP -I/home/pi/vzlogger/build -I/home/pi/vzlogger/include -I/home/pi/vzlogger -W -Wall -Wextra -Werror -Wnon-virtual-dtor -Wno-system-headers -Wno-deprecated -Wno-deprecated-declarations -Winit-self -Wmissing-include-dirs -Wno-pragmas -Wredundant-decls -Wno-unused-parameter -std=c++11 -fpermissive -Wno-error=redundant-decls -Wno-ignored-qualifiers -g3 -o CMakeFiles/proto.dir/MeterFluksoV2.cpp.o -c /home/pi/vzlogger/src/protocols/MeterFluksoV2.cpp
[ 13%] Building CXX object src/protocols/CMakeFiles/proto.dir/MeterFile.cpp.o
cd /home/pi/vzlogger/build/src/protocols && /usr/bin/c++ -DHAVE_CONFIG_HPP -I/home/pi/vzlogger/build -I/home/pi/vzlogger/include -I/home/pi/vzlogger -W -Wall -Wextra -Werror -Wnon-virtual-dtor -Wno-system-headers -Wno-deprecated -Wno-deprecated-declarations -Winit-self -Wmissing-include-dirs -Wno-pragmas -Wredundant-decls -Wno-unused-parameter -std=c++11 -fpermissive -Wno-error=redundant-decls -Wno-ignored-qualifiers -g3 -o CMakeFiles/proto.dir/MeterFile.cpp.o -c /home/pi/vzlogger/src/protocols/MeterFile.cpp
[ 16%] Building CXX object src/protocols/CMakeFiles/proto.dir/MeterExec.cpp.o
cd /home/pi/vzlogger/build/src/protocols && /usr/bin/c++ -DHAVE_CONFIG_HPP -I/home/pi/vzlogger/build -I/home/pi/vzlogger/include -I/home/pi/vzlogger -W -Wall -Wextra -Werror -Wnon-virtual-dtor -Wno-system-headers -Wno-deprecated -Wno-deprecated-declarations -Winit-self -Wmissing-include-dirs -Wno-pragmas -Wredundant-decls -Wno-unused-parameter -std=c++11 -fpermissive -Wno-error=redundant-decls -Wno-ignored-qualifiers -g3 -o CMakeFiles/proto.dir/MeterExec.cpp.o -c /home/pi/vzlogger/src/protocols/MeterExec.cpp
[ 18%] Building CXX object src/protocols/CMakeFiles/proto.dir/MeterRandom.cpp.o
cd /home/pi/vzlogger/build/src/protocols && /usr/bin/c++ -DHAVE_CONFIG_HPP -I/home/pi/vzlogger/build -I/home/pi/vzlogger/include -I/home/pi/vzlogger -W -Wall -Wextra -Werror -Wnon-virtual-dtor -Wno-system-headers -Wno-deprecated -Wno-deprecated-declarations -Winit-self -Wmissing-include-dirs -Wno-pragmas -Wredundant-decls -Wno-unused-parameter -std=c++11 -fpermissive -Wno-error=redundant-decls -Wno-ignored-qualifiers -g3 -o CMakeFiles/proto.dir/MeterRandom.cpp.o -c /home/pi/vzlogger/src/protocols/MeterRandom.cpp
[ 21%] Building CXX object src/protocols/CMakeFiles/proto.dir/MeterW1therm.cpp.o
cd /home/pi/vzlogger/build/src/protocols && /usr/bin/c++ -DHAVE_CONFIG_HPP -I/home/pi/vzlogger/build -I/home/pi/vzlogger/include -I/home/pi/vzlogger -W -Wall -Wextra -Werror -Wnon-virtual-dtor -Wno-system-headers -Wno-deprecated -Wno-deprecated-declarations -Winit-self -Wmissing-include-dirs -Wno-pragmas -Wredundant-decls -Wno-unused-parameter -std=c++11 -fpermissive -Wno-error=redundant-decls -Wno-ignored-qualifiers -g3 -o CMakeFiles/proto.dir/MeterW1therm.cpp.o -c /home/pi/vzlogger/src/protocols/MeterW1therm.cpp
[ 24%] Building CXX object src/protocols/CMakeFiles/proto.dir/MeterOMS.cpp.o
cd /home/pi/vzlogger/build/src/protocols && /usr/bin/c++ -DHAVE_CONFIG_HPP -I/home/pi/vzlogger/build -I/home/pi/vzlogger/include -I/home/pi/vzlogger -W -Wall -Wextra -Werror -Wnon-virtual-dtor -Wno-system-headers -Wno-deprecated -Wno-deprecated-declarations -Winit-self -Wmissing-include-dirs -Wno-pragmas -Wredundant-decls -Wno-unused-parameter -std=c++11 -fpermissive -Wno-error=redundant-decls -Wno-ignored-qualifiers -g3 -o CMakeFiles/proto.dir/MeterOMS.cpp.o -c /home/pi/vzlogger/src/protocols/MeterOMS.cpp
[ 27%] Linking CXX static library libproto.a
cd /home/pi/vzlogger/build/src/protocols && /usr/bin/cmake -P CMakeFiles/proto.dir/cmake_clean_target.cmake
cd /home/pi/vzlogger/build/src/protocols && /usr/bin/cmake -E cmake_link_script CMakeFiles/proto.dir/link.txt --verbose=1
/usr/bin/ar qc libproto.a CMakeFiles/proto.dir/MeterS0.cpp.o CMakeFiles/proto.dir/MeterD0.cpp.o CMakeFiles/proto.dir/MeterSML.cpp.o CMakeFiles/proto.dir/MeterFluksoV2.cpp.o CMakeFiles/proto.dir/MeterFile.cpp.o CMakeFiles/proto.dir/MeterExec.cpp.o CMakeFiles/proto.dir/MeterRandom.cpp.o CMakeFiles/proto.dir/MeterW1therm.cpp.o CMakeFiles/proto.dir/MeterOMS.cpp.o
/usr/bin/ranlib libproto.a
make[2]: Verzeichnis „/home/pi/vzlogger/build“ wird verlassen
[ 27%] Built target proto
make -f src/CMakeFiles/vz.dir/build.make src/CMakeFiles/vz.dir/depend
make[2]: Verzeichnis „/home/pi/vzlogger/build“ wird betreten
cd /home/pi/vzlogger/build && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/pi/vzlogger /home/pi/vzlogger/src /home/pi/vzlogger/build /home/pi/vzlogger/build/src /home/pi/vzlogger/build/src/CMakeFiles/vz.dir/DependInfo.cmake --color=
Scanning dependencies of target vz
make[2]: Verzeichnis „/home/pi/vzlogger/build“ wird verlassen
make -f src/CMakeFiles/vz.dir/build.make src/CMakeFiles/vz.dir/build
make[2]: Verzeichnis „/home/pi/vzlogger/build“ wird betreten
[ 29%] Building CXX object src/CMakeFiles/vz.dir/Channel.cpp.o
cd /home/pi/vzlogger/build/src && /usr/bin/c++ -DHAVE_CONFIG_HPP -I/home/pi/vzlogger/build -I/home/pi/vzlogger/include -I/home/pi/vzlogger -W -Wall -Wextra -Werror -Wnon-virtual-dtor -Wno-system-headers -Wno-deprecated -Wno-deprecated-declarations -Winit-self -Wmissing-include-dirs -Wno-pragmas -Wredundant-decls -Wno-unused-parameter -std=c++11 -fpermissive -Wno-error=redundant-decls -Wno-ignored-qualifiers -g3 -o CMakeFiles/vz.dir/Channel.cpp.o -c /home/pi/vzlogger/src/Channel.cpp
In file included from /usr/include/c++/10/list:63,
from /home/pi/vzlogger/include/Buffer.hpp:31,
from /home/pi/vzlogger/include/Channel.hpp:32,
from /home/pi/vzlogger/src/Channel.cpp:35:
/usr/include/c++/10/bits/stl_list.h: In copy constructor ‘std::__cxx11::list<_Tp, _Alloc>::list(const std::__cxx11::list<_Tp, _Alloc>&) [with _Tp = Option; _Alloc = std::allocator<Option>]’:
/usr/include/c++/10/bits/stl_list.h:738:31: note: parameter passing for argument of type ‘std::_List_const_iterator<Option>’ changed in GCC 7.1
738 | { _M_initialize_dispatch(__x.begin(), __x.end(), __false_type()); }
| ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/c++/10/bits/stl_list.h: In member function ‘void std::__cxx11::list<_Tp, _Alloc>::_M_initialize_dispatch(_InputIterator, _InputIterator, std::__false_type) [with _InputIterator = std::_List_const_iterator<Option>; _Tp = Option; _Alloc = std::allocator<Option>]’:
/usr/include/c++/10/bits/stl_list.h:1835:2: note: parameter passing for argument of type ‘std::_List_const_iterator<Option>’ changed in GCC 7.1
1835 | _M_initialize_dispatch(_InputIterator __first, _InputIterator __last,
| ^~~~~~~~~~~~~~~~~~~~~~
/usr/include/c++/10/bits/stl_list.h:1835:2: note: parameter passing for argument of type ‘std::_List_const_iterator<Option>’ changed in GCC 7.1
/usr/include/c++/10/bits/stl_list.h: In member function ‘void std::__cxx11::list<_Tp, _Alloc>::emplace_back(_Args&& ...) [with _Args = {const Option&}; _Tp = Option; _Alloc = std::allocator<Option>]’:
/usr/include/c++/10/bits/stl_list.h:1227:19: note: parameter passing for argument of type ‘std::_List_iterator<Option>’ changed in GCC 7.1
1227 | this->_M_insert(end(), std::forward<_Args>(__args)...);
| ~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/c++/10/bits/stl_list.h: In member function ‘void std::__cxx11::list<_Tp, _Alloc>::_M_insert(std::__cxx11::list<_Tp, _Alloc>::iterator, _Args&& ...) [with _Args = {const Option&}; _Tp = Option; _Alloc = std::allocator<Option>]’:
/usr/include/c++/10/bits/stl_list.h:1909:8: note: parameter passing for argument of type ‘std::__cxx11::list<Option>::iterator’ changed in GCC 7.1
1909 | _M_insert(iterator __position, _Args&&... __args)
| ^~~~~~~~~
[ 32%] Building CXX object src/CMakeFiles/vz.dir/Config_Options.cpp.o
cd /home/pi/vzlogger/build/src && /usr/bin/c++ -DHAVE_CONFIG_HPP -I/home/pi/vzlogger/build -I/home/pi/vzlogger/include -I/home/pi/vzlogger -W -Wall -Wextra -Werror -Wnon-virtual-dtor -Wno-system-headers -Wno-deprecated -Wno-deprecated-declarations -Winit-self -Wmissing-include-dirs -Wno-pragmas -Wredundant-decls -Wno-unused-parameter -std=c++11 -fpermissive -Wno-error=redundant-decls -Wno-ignored-qualifiers -g3 -o CMakeFiles/vz.dir/Config_Options.cpp.o -c /home/pi/vzlogger/src/Config_Options.cpp
In file included from /usr/include/c++/10/list:63,
from /home/pi/vzlogger/include/Buffer.hpp:31,
from /home/pi/vzlogger/include/Channel.hpp:32,
from /home/pi/vzlogger/src/Config_Options.cpp:31:
/usr/include/c++/10/bits/stl_list.h: In copy constructor ‘std::__cxx11::list<_Tp, _Alloc>::list(const std::__cxx11::list<_Tp, _Alloc>&) [with _Tp = Option; _Alloc = std::allocator<Option>]’:
/usr/include/c++/10/bits/stl_list.h:738:31: note: parameter passing for argument of type ‘std::_List_const_iterator<Option>’ changed in GCC 7.1
738 | { _M_initialize_dispatch(__x.begin(), __x.end(), __false_type()); }
| ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/c++/10/bits/stl_list.h: In member function ‘void std::__cxx11::list<_Tp, _Alloc>::push_back(const value_type&) [with _Tp = Option; _Alloc = std::allocator<Option>]’:
/usr/include/c++/10/bits/stl_list.h:1212:24: note: parameter passing for argument of type ‘std::_List_iterator<Option>’ changed in GCC 7.1
1212 | { this->_M_insert(end(), __x); }
| ~~~~~~~~~~~~~~~^~~~~~~~~~~~
/usr/include/c++/10/bits/stl_list.h: In member function ‘void std::__cxx11::list<_Tp, _Alloc>::_M_initialize_dispatch(_InputIterator, _InputIterator, std::__false_type) [with _InputIterator = std::_List_const_iterator<Option>; _Tp = Option; _Alloc = std::allocator<Option>]’:
/usr/include/c++/10/bits/stl_list.h:1835:2: note: parameter passing for argument of type ‘std::_List_const_iterator<Option>’ changed in GCC 7.1
1835 | _M_initialize_dispatch(_InputIterator __first, _InputIterator __last,
| ^~~~~~~~~~~~~~~~~~~~~~
/usr/include/c++/10/bits/stl_list.h:1835:2: note: parameter passing for argument of type ‘std::_List_const_iterator<Option>’ changed in GCC 7.1
/usr/include/c++/10/bits/stl_list.h: In member function ‘void std::__cxx11::list<_Tp, _Alloc>::_M_insert(std::__cxx11::list<_Tp, _Alloc>::iterator, _Args&& ...) [with _Args = {const Option&}; _Tp = Option; _Alloc = std::allocator<Option>]’:
/usr/include/c++/10/bits/stl_list.h:1909:8: note: parameter passing for argument of type ‘std::__cxx11::list<Option>::iterator’ changed in GCC 7.1
1909 | _M_insert(iterator __position, _Args&&... __args)
| ^~~~~~~~~
/usr/include/c++/10/bits/stl_list.h: In member function ‘void std::__cxx11::list<_Tp, _Alloc>::emplace_back(_Args&& ...) [with _Args = {const Option&}; _Tp = Option; _Alloc = std::allocator<Option>]’:
/usr/include/c++/10/bits/stl_list.h:1227:19: note: parameter passing for argument of type ‘std::_List_iterator<Option>’ changed in GCC 7.1
1227 | this->_M_insert(end(), std::forward<_Args>(__args)...);
| ~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Am 09.04.2023 um 12:10 schrieb applicationMGR <applicationMGR at ecoCuyo.de>:
>
> Hallo Daniel,
> Danke für die schnelle Antwort. Compiler läuft noch ….
> Beste Grüße, Armin
>
>> Am 09.04.2023 um 12:07 schrieb Daniel Lauckner <vz at jahp.de>:
>>
>> Hallo,
>>
>>
>> am Sonntag, 9. April 2023 um 11:55 hat applicationMGR geschrieben:
>>> … muss "direction_from_status": true beim betreffenden meter mit in die vzlogger.conf?
>>
>> Ja.
>>
>> Die oberste Zeile im Log mit dem Versionshinweis sollte auch anders aussehen.
>>
>>
>> mfg Daniel
>>
>
-------------- nächster Teil --------------
Ein Dateianhang mit HTML-Daten wurde abgetrennt...
URL: <http://demo.volkszaehler.org/pipermail/volkszaehler-users/attachments/20230409/90ec87bd/attachment-0001.html>
Mehr Informationen über die Mailingliste volkszaehler-users