<html>
<head>
<meta content="text/html; charset=utf-8" http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Hallo,<br>
<br>
meine rc.local:<br>
<br>
#!/bin/sh -e<br>
#<br>
# rc.local<br>
#<br>
# This script is executed at the end of each multiuser runlevel.<br>
# Make sure that the script will "exit 0" on success or any other<br>
# value on error.<br>
#<br>
# In order to enable or disable this script just change the
execution<br>
# bits.<br>
#<br>
# By default this script does nothing.<br>
<br>
# Print the IP address<br>
_IP=$(hostname -I) || true<br>
if [ "$_IP" ]; then<br>
printf "My IP address is %s\n" "$_IP"<br>
fi<br>
<br>
# Part of DS2482 I2C 1-Wire Master to Volkszaehler 'RaspberryPI
deamon'.<br>
echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-1/new_device<br>
# echo ds2482 0x19 > /sys/bus/i2c/devices/i2c-1/new_device<br>
# echo ds2482 0x1a > /sys/bus/i2c/devices/i2c-1/new_device<br>
<br>
# Register I2C RTC, nur bei großer Erweiterung<br>
# echo ds1307 0x68 > /sys/bus/i2c/devices/i2c-1/new_device<br>
<br>
# Part of S0/Impulse to Volkszaehler 'RaspberryPI deamon','s0vz',
nur bei alter große Erweiterung<br>
# echo 17 > /sys/class/gpio/export && echo "rising" >
/sys/class/gpio/gpio17/edge<br>
# echo 18 > /sys/class/gpio/export && echo "rising" >
/sys/class/gpio/gpio18/edge<br>
# echo 22 > /sys/class/gpio/export && echo "rising" >
/sys/class/gpio/gpio22/edge<br>
# echo 23 > /sys/class/gpio/export && echo "rising" >
/sys/class/gpio/gpio23/edge<br>
# echo 24 > /sys/class/gpio/export && echo "rising" >
/sys/class/gpio/gpio24/edge<br>
# echo 27 > /sys/class/gpio/export && echo "rising" >
/sys/class/gpio/gpio27/edge<br>
<br>
# Part of S0/Impulse to Volkszaehler 'RaspberryPI
deamon','s0vz_new', nur bei neuer große Erweiterung<br>
# echo 4 > /sys/class/gpio/export && echo "rising" >
/sys/class/gpio/gpio4/edge<br>
# echo 18 > /sys/class/gpio/export && echo "rising" >
/sys/class/gpio/gpio18/edge<br>
# echo 17 > /sys/class/gpio/export && echo "rising" >
/sys/class/gpio/gpio17/edge<br>
# echo 23 > /sys/class/gpio/export && echo "rising" >
/sys/class/gpio/gpio23/edge<br>
# echo 27 > /sys/class/gpio/export && echo "rising" >
/sys/class/gpio/gpio27/edge<br>
# echo 22 > /sys/class/gpio/export && echo "rising" >
/sys/class/gpio/gpio22/edge<br>
<br>
# GPIOs exportieren und Datenrichtung einstellen,
'Schaltausgang_new'<br>
# echo 24 > /sys/class/gpio/export<br>
# echo 25 > /sys/class/gpio/export<br>
# echo out > /sys/class/gpio/gpio24/direction<br>
# echo out > /sys/class/gpio/gpio25/direction<br>
<br>
# GPIOs exportieren und Datenrichtung einstellen, 'Schaltausgang'<br>
echo 9 > /sys/class/gpio/export<br>
echo 11 > /sys/class/gpio/export<br>
echo out > /sys/class/gpio/gpio9/direction<br>
echo out > /sys/class/gpio/gpio11/direction<br>
<br>
# 1wirevz starten<br>
#/etc/init.d/1wirevz restart<br>
<br>
#s0vz starten<br>
#sudo s0vz<br>
#sudo s0vz_new<br>
<br>
#vzlogger starten<br>
sudo vzlogger -d<br>
<br>
#Set Systemtime from RTC<br>
# sudo hwclock -s<br>
<br>
exit 0<br>
<br>
<br>
<br>
<b><big><big>und hier die vzlogger.conf:</big></big></b><br>
{<br>
"retry": 0,<br>
"daemon": true,<br>
"verbosity": 15,<br>
"log": "/var/log/vzlogger.log",<br>
// "push": [],<br>
"local": {<br>
"enabled": false,<br>
"port": 8080,<br>
"index": false,<br>
"timeout": 0,<br>
"buffer": 0<br>
},<br>
"meters": [<br>
{<br>
"enabled": true,<br>
"allowskip": false,<br>
"interval": -1,<br>
"aggtime": -1,<br>
"aggfixedinterval": false,<br>
"channels": [<br>
{<br>
"uuid": "e6f572e0-56d1-11e5-a2e3-9309764087d9",<br>
"identifier": "Impulse",<br>
"api": "volkszaehler",<br>
"middleware": <a class="moz-txt-link-rfc2396E" href="http://127.0.0.1/middleware.php">"http://127.0.0.1/middleware.php"</a>,<br>
"secretKey": "",<br>
"type": "device",<br>
"scaler": 1,<br>
"aggmode": "none",<br>
"duplicates": 0<br>
}<br>
],<br>
"protocol": "s0",<br>
"gpio": 24,<br>
"resolution": 1000,<br>
"configureGPIO": true,<br>
"debounce_delay": 0<br>
},<br>
{<br>
"enabled": true,<br>
"allowskip": false,<br>
"interval": -1,<br>
"aggtime": -1,<br>
"aggfixedinterval": false,<br>
"channels": [<br>
{<br>
"uuid": "b9a4f840-5607-11e5-bd7e-b5567e690b9d",<br>
"identifier": "Impulse",<br>
"api": "volkszaehler",<br>
"middleware": <a class="moz-txt-link-rfc2396E" href="http://127.0.0.1/middleware.php">"http://127.0.0.1/middleware.php"</a>,<br>
"secretKey": "",<br>
"type": "device",<br>
"scaler": 1,<br>
"aggmode": "none",<br>
"duplicates": 0<br>
}<br>
],<br>
"protocol": "s0",<br>
"gpio": 10,<br>
"resolution": 1000,<br>
"configureGPIO": true,<br>
"debounce_delay": 0<br>
},<br>
{<br>
"enabled": true,<br>
"allowskip": false,<br>
"interval": -1,<br>
"aggtime": -1,<br>
"aggfixedinterval": false,<br>
"channels": [<br>
{<br>
"uuid": "079e4d60-f03a-11e4-a1f2-8ba3458b66ed",<br>
"identifier": "Impulse",<br>
"api": "volkszaehler",<br>
"middleware": <a class="moz-txt-link-rfc2396E" href="http://127.0.0.1/middleware.php">"http://127.0.0.1/middleware.php"</a>,<br>
"secretKey": "",<br>
"type": "device",<br>
"scaler": 1,<br>
"aggmode": "none",<br>
"duplicates": 0<br>
}<br>
],<br>
"protocol": "s0",<br>
"gpio": 17,<br>
"resolution": 1000,<br>
"configureGPIO": true,<br>
"debounce_delay": 0<br>
},<br>
{<br>
"enabled": true,<br>
"allowskip": false,<br>
"interval": -1,<br>
"aggtime": -1,<br>
"aggfixedinterval": false,<br>
"channels": [<br>
{<br>
"uuid": "14d79bd0-f03a-11e4-85e9-edfdbad8043f",<br>
"identifier": "Impulse",<br>
"api": "volkszaehler",<br>
"middleware": <a class="moz-txt-link-rfc2396E" href="http://127.0.0.1/middleware.php">"http://127.0.0.1/middleware.php"</a>,<br>
"secretKey": "",<br>
"type": "device",<br>
"scaler": 1,<br>
"aggmode": "none",<br>
"duplicates": 0<br>
}<br>
],<br>
"protocol": "s0",<br>
"gpio": 23,<br>
"resolution": 1000,<br>
"configureGPIO": true,<br>
"debounce_delay": 0<br>
},<br>
{<br>
"enabled": true,<br>
"allowskip": false,<br>
"interval": -1,<br>
"aggtime": -1,<br>
"aggfixedinterval": false,<br>
"channels": [<br>
{<br>
"uuid": "24ef24a0-f03a-11e4-8653-2f3eb496bfb8",<br>
"identifier": "Impulse",<br>
"api": "volkszaehler",<br>
"middleware": <a class="moz-txt-link-rfc2396E" href="http://localhost/middleware.php">"http://localhost/middleware.php"</a>,<br>
"secretKey": "",<br>
"type": "device",<br>
"scaler": 1,<br>
"aggmode": "none",<br>
"duplicates": 0<br>
}<br>
],<br>
"protocol": "s0",<br>
"gpio": 27,<br>
"resolution": 1000,<br>
"configureGPIO": true,<br>
"debounce_delay": 0<br>
},<br>
{<br>
"enabled": true,<br>
"allowskip": false,<br>
"interval": -1,<br>
"aggtime": -1,<br>
"aggfixedinterval": false,<br>
"channels": [<br>
{<br>
"uuid": "777a37c0-56d2-11e5-b180-2f8252896f04",<br>
"identifier": "Impulse",<br>
"api": "volkszaehler",<br>
"middleware": <a class="moz-txt-link-rfc2396E" href="http://127.0.0.1/middleware.php">"http://127.0.0.1/middleware.php"</a>,<br>
"secretKey": "",<br>
"type": "device",<br>
"scaler": 1,<br>
"aggmode": "none",<br>
"duplicates": 0<br>
}<br>
],<br>
"protocol": "s0",<br>
"gpio": 22,<br>
"resolution": 1000,<br>
"configureGPIO": true,<br>
"debounce_delay": 0<br>
},<br>
{<br>
"enabled": true,<br>
"allowskip": false,<br>
"interval": -1,<br>
"aggtime": -1,<br>
"aggfixedinterval": false,<br>
"channels": [<br>
{<br>
"uuid": "68102e10-ef7c-11e4-a495-7f0a84de0257",<br>
"identifier": "28-000004508eec",<br>
"api": "volkszaehler",<br>
"middleware": <a class="moz-txt-link-rfc2396E" href="http://127.0.0.1/middleware.php">"http://127.0.0.1/middleware.php"</a>,<br>
"secretKey": "",<br>
"type": "device",<br>
"scaler": 1,<br>
"aggmode": "none",<br>
"duplicates": 0<br>
},<br>
{<br>
"uuid": "9bee5e60-ef7c-11e4-80af-6b56ff429c5f",<br>
"identifier": "28-00000450a4cc",<br>
"api": "volkszaehler",<br>
"middleware": <a class="moz-txt-link-rfc2396E" href="http://127.0.0.1/middleware.php">"http://127.0.0.1/middleware.php"</a>,<br>
"secretKey": "",<br>
"type": "device",<br>
"scaler": 1,<br>
"aggmode": "none",<br>
"duplicates": 0<br>
},<br>
{<br>
"uuid": "c6cb4b20-ef7c-11e4-8fd6-972990841f29",<br>
"identifier": "28-00000450cbbd",<br>
"api": "volkszaehler",<br>
"middleware": <a class="moz-txt-link-rfc2396E" href="http://127.0.0.1/middleware.php">"http://127.0.0.1/middleware.php"</a>,<br>
"secretKey": "",<br>
"type": "device",<br>
"scaler": 1,<br>
"aggmode": "none",<br>
"duplicates": 0<br>
}<br>
],<br>
"protocol": "w1therm"<br>
}<br>
]<br>
}<br>
<br>
Im Frontend habe ich drei S0 Kanäle erstellt die an den eingängen
3,4 und 5 an der Erweiterung angeklemmt wurden.<br>
<br>
<br>
Gruß<br>
<br>
Daniel<br>
<br>
<br>
<br>
<br>
<br>
<div class="moz-cite-prefix">Am 06.10.2015 um 16:24 schrieb Udo1:<br>
</div>
<blockquote cite="mid:5613D985.6070209@gmx.net" type="cite">Hallo
Daniel,
<br>
<br>
Am 06.10.2015 um 14:18 schrieb News:
<br>
<blockquote type="cite">ich bekomme keinen Chart angezeigt. Hier
mal ein Auszug aus der /var/log/vzlogger.log </blockquote>
<br>
Ich wiederhole mich:
<br>
<br>
<blockquote type="cite">Poste mal deine jetzige komplette
/etc/rc.local und /etc/vzlogger.conf.
<br>
Was für einen Typ von Kanäle hast du im Frontend erstellt? </blockquote>
<br>
Gruß
<br>
Udo
<br>
<br>
</blockquote>
<br>
</body>
</html>