[vz-users] Temperaturen aufzeichnen?

[Hans Engelhardt]

Am 24.01.2014 13:59, schrieb Udo1:
> Wie sieht deine modules und rc.local jetzt aus? Bitte vollständig.
>
###################################################################
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
# Parameters can be specified after the module name.

snd-bcm2835

# Part of DS2482 I²C 1-Wire® Master to Volkszaehler 'RaspberryPI deamon'.
i2c-bcm2708
i2c-dev
ds2482
# 1wire
w1-gpio pullup=1
w1-therm

###################################################################
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

# Print the IP address
_IP=$(hostname -I) || true
if [ "$_IP" ]; then
   printf "My IP address is %s\n" "$_IP"
fi

#killall vzlogger
#/usr/local/bin/vzlogger
#/usr/local/bin/vzlogger-c

owfs

# Part of DS2482 I2C 1-Wire Master to Volkszaehler 'RaspberryPI deamon'.

#Raspberry Rev1
#echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-0/new_device
#echo ds2482 0x19 > /sys/bus/i2c/devices/i2c-0/new_device
#echo ds2482 0x1a > /sys/bus/i2c/devices/i2c-0/new_device

# Raspberry Rev2
echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-1/new_device
echo ds2482 0x19 > /sys/bus/i2c/devices/i2c-1/new_device
echo ds2482 0x1a > /sys/bus/i2c/devices/i2c-1/new_device

# Part of S0/Impulse to Volkszaehler 'RaspberryPI deamon'
echo 17 > /sys/class/gpio/export && echo "rising" > 
/sys/class/gpio/gpio17/edge
echo 18 > /sys/class/gpio/export && echo "rising" > 
/sys/class/gpio/gpio18/edge
echo 22 > /sys/class/gpio/export && echo "rising" > 
/sys/class/gpio/gpio22/edge
echo 23 > /sys/class/gpio/export && echo "rising" > 
/sys/class/gpio/gpio23/edge
echo 24 > /sys/class/gpio/export && echo "rising" > 
/sys/class/gpio/gpio24/edge
echo 10 > /sys/class/gpio/export && echo "rising" > 
/sys/class/gpio/gpio10/edge
#echo 17 > /sys/class/gpio/export && echo "in" > 
/sys/class/gpio/gpio17/direction && echo "falling" > 
/sys/class/gpio/gpio17/edge
#echo 18 > /sys/class/gpio/export && echo "in" > 
/sys/class/gpio/gpio18/direction && echo "falling" > 
/sys/class/gpio/gpio18/edge
#echo 23 > /sys/class/gpio/export && echo "in" > 
/sys/class/gpio/gpio23/direction && echo "falling" > 
/sys/class/gpio/gpio23/edge
#echo 22 > /sys/class/gpio/export && echo "in" > 
/sys/class/gpio/gpio22/direction && echo "falling" > 
/sys/class/gpio/gpio22/edge
#echo 24 > /sys/class/gpio/export && echo "in" > 
/sys/class/gpio/gpio24/direction && echo "falling" > 
/sys/class/gpio/gpio24/edge
#echo 10 > /sys/class/gpio/export && echo "in" > 
/sys/class/gpio/gpio10/direction && echo "falling" > 
/sys/class/gpio/gpio10/edge


exit 0
###################################################################
-- 
Tschau Hans