[vz-users] Temperaturen aufzeichnen?

[Udo1]

Am 24.01.2014 14:02, schrieb Hans Engelhardt:
modules:
> # Part of DS2482 I²C 1-Wire® Master to Volkszaehler 'RaspberryPI deamon'.
> i2c-bcm2708
> i2c-dev
> ds2482
> # 1wire
> w1-gpio pullup=1
> w1-therm 
Falsch!

Muss so aussehen:

> # Part of DS2482 I²C 1-Wire® Master to Volkszaehler 'RaspberryPI deamon'.
> i2c-bcm2708
> i2c-dev
> ds2482
> w1-therm
------------
rc.local:
> owfs
>
> # Part of DS2482 I2C 1-Wire Master to Volkszaehler 'RaspberryPI deamon'.
>
> #Raspberry Rev1
> #echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-0/new_device
> #echo ds2482 0x19 > /sys/bus/i2c/devices/i2c-0/new_device
> #echo ds2482 0x1a > /sys/bus/i2c/devices/i2c-0/new_device
>
> # Raspberry Rev2
> echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-1/new_device
> echo ds2482 0x19 > /sys/bus/i2c/devices/i2c-1/new_device
> echo ds2482 0x1a > /sys/bus/i2c/devices/i2c-1/new_device
owfs willst du nicht wirklich benutzen!
Sollte so aussehen:
> #owfs
>
> # Part of DS2482 I2C 1-Wire Master to Volkszaehler 'RaspberryPI deamon'.
>
> #Raspberry Rev1
> #echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-0/new_device
> #echo ds2482 0x19 > /sys/bus/i2c/devices/i2c-0/new_device
> #echo ds2482 0x1a > /sys/bus/i2c/devices/i2c-0/new_device
>
> # Raspberry Rev2
> echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-1/new_device
> #echo ds2482 0x19 > /sys/bus/i2c/devices/i2c-1/new_device
> #echo ds2482 0x1a > /sys/bus/i2c/devices/i2c-1/new_device

Gruß
Udo