[vz-users] Easymeter vzlogger-conf
Matthias Behr
mbehr at mcbehr.de
Mon Jan 26 11:23:26 CET 2015
Ok. In dem Log ist kein Sprung sichtbar.
[Jan 25 20:54:17][chn0] Adding reading to queue (value=795554.60 ts=1422219257.039)
[Jan 25 20:54:18][chn1] Adding reading to queue (value=680592.00 ts=1422219258.619)
[Jan 25 21:04:17][chn0] Adding reading to queue (value=795554.90 ts=1422219857.050)
[Jan 25 21:04:18][chn1] Adding reading to queue (value=680592.00 ts=1422219858.639)
[Jan 25 21:14:17][chn0] Adding reading to queue (value=795555.20 ts=1422220457.062)
[Jan 25 21:14:18][chn1] Adding reading to queue (value=680592.00 ts=1422220458.662)
Kannst du einen Log schicken (oder eine Zeitangabe), wo ein Sprung war?
> Am 26.01.2015 um 18:05 schrieb Jan Goe <jan.andrea7 at googlemail.com>:
>
> ja ich habe 2 Meter angeschlossen ( 1x für wohnung 1x für die wäremepumpe )
>
> hier die config:
>
> ---------------
> /**
> * vzlogger configuration
> *
> * use proper encoded JSON with javascript comments
> *
> * take a look at the wiki for detailed information:
> * http://wiki.volkszaehler.org/software/controller/vzlogger#configuration <http://wiki.volkszaehler.org/software/controller/vzlogger#configuration>
> */
>
> {
> "retry" : 30, /* how long to sleep between failed requests, in seconds */
> "daemon": true, /* run periodically */
> "foreground" : true, /* dont run in background (prevents forking) */
>
> "verbosity" : 15, /* between 0 and 15 */
> "log" : "/var/log/vzlogger.log",/* path to logfile, optional */
>
> "local" : {
> "enabled" : false, /* should we start the local HTTPd for serving live readings? */
> "port" : 80, /* the TCP port for the local HTTPd */
> "index" : true, /* should we provide a index listing of available channels? */
> "timeout" : 30, /* timeout for long polling comet requests, 0 disables comet, in seconds */
> "buffer" : 600 /* how long to buffer readings for the local interface, in seconds */
> },
>
> "meters" : [{
> "enabled" : true, /* disabled meters will be ignored */
> "protocol" : "sml", /* use 'vzlogger -h' for list of available protocols */
> "device" : "/dev/usb-ir-lesekopf0",
> "interval": 600,
> "channels": [{
> "uuid" : "11c04d20-a31e-11e4-8745-d1d65d1da157",
> "middleware" : "http://127.0.0.1/volkszaehler.org/htdocs/middleware.php <http://127.0.0.1/volkszaehler.org/htdocs/middleware.php>",
> "identifier" : "1-0:1.8.0",
> }]
>
> },{
> "enabled" : true, /* disabled meters will be ignored */
> "protocol" : "sml", /* use 'vzlogger -h' for list of available protocols */
> "device" : "/dev/usb-ir-lesekopf1",
> "interval": 600,
> "channels": [{
> "uuid" : "f9d00040-a47e-11e4-8bb8-edea5119d3cf",
> "middleware" : "http://127.0.0.1/volkszaehler.org/htdocs/middleware.php <http://127.0.0.1/volkszaehler.org/htdocs/middleware.php>",
> "identifier" : "1-0:1.8.0",
> }]
> },
> ]}
>
> ---------------------------
>
> 2015-01-25 23:33 GMT+01:00 Matthias Behr <mbehr at mcbehr.de <mailto:mbehr at mcbehr.de>>:
> Du hast 2 Meter angeschlossen, oder? Kannst du mal die ganze Config schicken?
>
> [Jan 25 21:14:17][mtr0] Reading: id=1-0:1.8.0*255/ObisItentifier:1-0:1.8.0*255 value=795555.20 ts=1422220457.062
> [Jan 25 21:14:18][mtr1] Reading: id=1-0:1.8.0*255/ObisItentifier:1-0:1.8.0*255 value=680592.00 ts=1422220458.662
>
>
>
>> Am 26.01.2015 um 06:23 schrieb Jan Goe <jan.andrea7 at googlemail.com <mailto:jan.andrea7 at googlemail.com>>:
>>
>> hallo im anhang die vzlogger.log
>>
>> 2015-01-25 22:16 GMT+01:00 Matthias Behr <mbehr at mcbehr.de <mailto:mbehr at mcbehr.de>>:
>> Kannst du mal ein Log mitschicken?
>> Die Frage ist, ob das zB durch falsches Parsen oder Bitfehler bei der Übertragung passiert.
>>
>> Gruß
>> Matthias
>>
>> Sent from a mobile device.
>>
>> Am 26.01.2015 um 01:34 schrieb Nils Radde <nils.rasmus at googlemail.com <mailto:nils.rasmus at googlemail.com>>:
>>
>>>
>>>
>>> Moin zusammen,
>>>
>>>
>>>
>>> ich habe mir den Auslesekopf (USB) von Udo gekauft und möchte damit mein Easymeter Q3D auslesen.
>>>
>>> Dieses klappt eigentlich ganz gut, nur das ich immer sehr hohe spitzen drin habe.
>>>
>>> Sowas wie 24 MW.
>>>
>>>
>>>
>>> Wie bekomme ich diese weg. Ich schicke euch meine vzlogger conf mal mit.
>>>
>>>
>>>
>>> /**
>>>
>>> * vzlogger configuration
>>>
>>> *
>>>
>>> * use proper encoded JSON with javascript comments
>>>
>>> *
>>>
>>> * take a look at the wiki for detailed information:
>>>
>>> * http://wiki.volkszaehler.org/software/controller/vzlogger#configuration <http://wiki.volkszaehler.org/software/controller/vzlogger#configuration>
>>> */
>>>
>>>
>>>
>>> {
>>>
>>> "retry" : 30, /* how long to sleep between failed requests, in seconds */
>>>
>>> "daemon": true, /* run periodically */
>>>
>>> //"foreground" : true, /* dont run in background (prevents forking) */
>>>
>>> "verbosity" : 1, /* between 0 and 15 */
>>>
>>> "log" : "/var/log/vzlogger.log", /* path to logfile, optional */
>>>
>>>
>>>
>>> "local" : {
>>>
>>> "enabled" : false, /* should we start the local HTTPd for serving live readings? */
>>>
>>> "port" : 80, /* the TCP port for the local HTTPd */
>>>
>>> "index" : true, /* should we provide a index listing of available channels if no UUID was requested? */
>>>
>>> "timeout" : 30, /* timeout for long polling comet requests, 0 disables comet, in seconds */
>>>
>>> "buffer" : 600 /* how long to buffer readings for the local interface, in seconds */
>>>
>>> },
>>>
>>>
>>>
>>> "meters" : [{
>>>
>>> "enabled" : true, /* disabled meters will be ignored */
>>>
>>> "protocol" : "d0", /* see 'vzlogger -h' for list of available prot$ */
>>>
>>> "device" : "/dev/usb-ir-lesekopf",
>>>
>>> "channels": [{
>>>
>>> "uuid" : "9176b410-a273-11e4-9298-d98f4ffd1494",
>>>
>>> "middleware" : "http://localhost/middleware.php <http://localhost/middleware.php>",
>>>
>>> "identifier" : "1-0:1.7.255",
>>>
>>> }, {
>>>
>>> "uuid" : "57829b20-a271-11e4-88bc-c33ce80d3bd2",
>>>
>>> "middleware" : "http://localhost/middleware.php <http://localhost/middleware.php>",
>>>
>>> "identifier" : "1-0:1.8.0"
>>>
>>> }]
>>>
>>> }]
>>>
>>> }
>>>
>>>
>>>
>>> Danke
>>>
>>
>> <vzlogger.log>
>
>
Gruß
Matthias Behr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://demo.volkszaehler.org/pipermail/volkszaehler-users/attachments/20150126/1e91bbac/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 5256 bytes
Desc: not available
URL: <http://demo.volkszaehler.org/pipermail/volkszaehler-users/attachments/20150126/1e91bbac/attachment-0001.bin>
More information about the volkszaehler-users
mailing list