[vz-users] Easymeter vzlogger-conf
Jan Goe
jan.andrea7 at googlemail.com
Mon Jan 26 11:46:14 CET 2015
Na klar, das problem ist die Sprünge finden immer nur statt wenn ich
vzlogger neu starte, um so länger vzlogger läuft um so größer wir die
abweichung zum zähler ein neu start von vzlogger behebt diese abweichung
dann meistens.
hier ein auzzug, wo man den sprung und den neu start gut erkennen kann :
-----
[Jan 26 08:45:19][chn1] compare: 1422261319015 1422261919024
1422261919024.211914
[Jan 26 08:45:19][chn1] JSON request body: [ [ 1422261919024.211914,
680616.500000 ] ]
[Jan 26 08:45:19][chn1] CURL: Connection #0 seems to be dead!
[Jan 26 08:45:19][chn1] CURL: Closing connection #0
[Jan 26 08:45:19][chn1] CURL: About to connect() to 127.0.0.1 port 80 (#0)
[Jan 26 08:45:19][chn1] CURL: Trying 127.0.0.1...
[Jan 26 08:45:19][chn1] CURL: connected
[Jan 26 08:45:19][chn1] CURL: Connected to 127.0.0.1 (127.0.0.1) port 80 (#0)
[Jan 26 08:45:19][chn1] Buffer dump (size=0 keep=32): {}
[Jan 26 08:45:19][mtr1] Next reading in 600 seconds
[Jan 26 08:45:19][chn1] CURL: Sent 43 bytes..
[Jan 26 08:45:19][chn1] CURL: Sent '[ [ 1422261919024.211914,
680616.500000 ] ]' bytes
[Jan 26 08:45:19][chn1] CURL: upload completely sent off: 43 out of 43 bytes
[Jan 26 08:45:19][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
[Jan 26 08:45:19][chn0] CURL: HTTP 1.1 or later with persistent
connection, pipelining supported
[Jan 26 08:45:19][chn0] CURL: Received 26 bytes
[Jan 26 08:45:19][chn0] CURL: Received '{"version":"0.3","rows":1}' bytes
[Jan 26 08:45:19][chn0] CURL: Connection #0 to host 127.0.0.1 left intact
[Jan 26 08:45:19][chn0] CURL Request succeeded with code: 200
[Jan 26 08:45:20][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
[Jan 26 08:45:21][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
[Jan 26 08:45:21][chn1] CURL: HTTP 1.1 or later with persistent
connection, pipelining supported
[Jan 26 08:45:21][chn1] CURL: Received 26 bytes
[Jan 26 08:45:21][chn1] CURL: Received '{"version":"0.3","rows":1}' bytes
[Jan 26 08:45:21][chn1] CURL: Connection #0 to host 127.0.0.1 left intact
[Jan 26 08:45:21][chn1] CURL Request succeeded with code: 200
[Jan 26 08:55:16][mtr0] Got 7 new readings from meter:
[Jan 26 08:55:16][mtr0] Reading:
id=1-0:1.8.0*255/ObisItentifier:1-0:1.8.0*255 value=796475.80
ts=1422262516.184
[Jan 26 08:55:16][mtr0] Reading:
id=1-0:1.8.1*255/ObisItentifier:1-0:1.8.1*255 value=796475.80
ts=1422262516.184
[Jan 26 08:55:16][mtr0] Reading:
id=1-0:1.8.2*255/ObisItentifier:1-0:1.8.2*255 value=0.00
ts=1422262516.184
[Jan 26 08:55:16][mtr0] Reading:
id=1-0:16.7.0*255/ObisItentifier:1-0:16.7.0*255 value=491.00
ts=1422262516.184
[Jan 26 08:55:16][mtr0] Reading:
id=1-0:36.7.0*255/ObisItentifier:1-0:36.7.0*255 value=282.00
ts=1422262516.184
[Jan 26 08:55:16][mtr0] Reading:
id=1-0:56.7.0*255/ObisItentifier:1-0:56.7.0*255 value=51.00
ts=1422262516.185
[Jan 26 08:55:16][mtr0] Reading:
id=1-0:76.7.0*255/ObisItentifier:1-0:76.7.0*255 value=156.00
ts=1422262516.185
[Jan 26 08:55:16][chn0] Adding reading to queue (value=796475.80
ts=1422262516.184)
[Jan 26 08:55:16][chn0] ==> number of tuples: 1
[Jan 26 08:55:16][chn0] compare: 1422261916165 1422262516184
1422262516184.354980
[Jan 26 08:55:16][chn0] JSON request body: [ [ 1422262516184.354980,
796475.800000 ] ]
[Jan 26 08:55:16][chn0] CURL: Connection #0 seems to be dead!
[Jan 26 08:55:16][chn0] CURL: Closing connection #0
[Jan 26 08:55:16][chn0] CURL: About to connect() to 127.0.0.1 port 80 (#0)
[Jan 26 08:55:16][chn0] CURL: Trying 127.0.0.1...
[Jan 26 08:55:16][chn0] Buffer dump (size=0 keep=32): {}
[Jan 26 08:55:16][mtr0] Next reading in 600 seconds
[Jan 26 08:55:16][chn0] CURL: connected
[Jan 26 08:55:16][chn0] CURL: Connected to 127.0.0.1 (127.0.0.1) port 80 (#0)
[Jan 26 08:55:16][chn0] CURL: Sent 43 bytes..
[Jan 26 08:55:16][chn0] CURL: Sent '[ [ 1422262516184.354980,
796475.800000 ] ]' bytes
[Jan 26 08:55:16][chn0] CURL: upload completely sent off: 43 out of 43 bytes
[Jan 26 08:55:16][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
[Jan 26 08:55:17][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
[Jan 26 08:55:18][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
[Jan 26 08:55:18][chn0] CURL: HTTP 1.1 or later with persistent
connection, pipelining supported
[Jan 26 08:55:18][chn0] CURL: Received 26 bytes
[Jan 26 08:55:18][chn0] CURL: Received '{"version":"0.3","rows":1}' bytes
[Jan 26 08:55:18][chn0] CURL: Connection #0 to host 127.0.0.1 left intact
[Jan 26 08:55:18][chn0] CURL Request succeeded with code: 200
[Jan 26 08:55:19][mtr1] Got 7 new readings from meter:
[Jan 26 08:55:19][mtr1] Reading:
id=1-0:1.8.0*255/ObisItentifier:1-0:1.8.0*255 value=680616.50
ts=1422262519.044
[Jan 26 08:55:19][mtr1] Reading:
id=1-0:1.8.1*255/ObisItentifier:1-0:1.8.1*255 value=680616.50
ts=1422262519.044
[Jan 26 08:55:19][mtr1] Reading:
id=1-0:1.8.2*255/ObisItentifier:1-0:1.8.2*255 value=0.00
ts=1422262519.044
[Jan 26 08:55:19][mtr1] Reading:
id=1-0:16.7.0*255/ObisItentifier:1-0:16.7.0*255 value=14.00
ts=1422262519.044
[Jan 26 08:55:19][mtr1] Reading:
id=1-0:36.7.0*255/ObisItentifier:1-0:36.7.0*255 value=-2.00
ts=1422262519.044
[Jan 26 08:55:19][mtr1] Reading:
id=1-0:56.7.0*255/ObisItentifier:1-0:56.7.0*255 value=0.00
ts=1422262519.044
[Jan 26 08:55:19][mtr1] Reading:
id=1-0:76.7.0*255/ObisItentifier:1-0:76.7.0*255 value=14.00
ts=1422262519.044
[Jan 26 08:55:19][chn1] Adding reading to queue (value=680616.50
ts=1422262519.044)
[Jan 26 08:55:19][chn1] ==> number of tuples: 1
[Jan 26 08:55:19][chn1] compare: 1422261919024 1422262519044
1422262519044.300049
[Jan 26 08:55:19][chn1] JSON request body: [ [ 1422262519044.300049,
680616.500000 ] ]
[Jan 26 08:55:19][chn1] CURL: Connection #0 seems to be dead!
[Jan 26 08:55:19][chn1] CURL: Closing connection #0
[Jan 26 08:55:19][chn1] CURL: About to connect() to 127.0.0.1 port 80 (#0)
[Jan 26 08:55:19][chn1] CURL: Trying 127.0.0.1...
[Jan 26 08:55:19][chn1] CURL: connected
[Jan 26 08:55:19][chn1] CURL: Connected to 127.0.0.1 (127.0.0.1) port 80 (#0)
[Jan 26 08:55:19][chn1] Buffer dump (size=0 keep=32): {}
[Jan 26 08:55:19][mtr1] Next reading in 600 seconds
[Jan 26 08:55:19][chn1] CURL: Sent 43 bytes..
[Jan 26 08:55:19][chn1] CURL: Sent '[ [ 1422262519044.300049,
680616.500000 ] ]' bytes
[Jan 26 08:55:19][chn1] CURL: upload completely sent off: 43 out of 43 bytes
[Jan 26 08:55:19][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
[Jan 26 08:55:20][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
[Jan 26 08:55:21][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
[Jan 26 08:55:21][chn1] CURL: HTTP 1.1 or later with persistent
connection, pipelining supported
[Jan 26 08:55:21][chn1] CURL: Received 26 bytes
[Jan 26 08:55:21][chn1] CURL: Received '{"version":"0.3","rows":1}' bytes
[Jan 26 08:55:21][chn1] CURL: Connection #0 to host 127.0.0.1 left intact
[Jan 26 08:55:21][chn1] CURL Request succeeded with code: 200
[Jan 26 09:03:51] terminating on signal 15.
[Jan 26 09:03:51] Closing connections to terminate
[Jan 26 09:04:20] Opened logfile /var/log/vzlogger.log
[Jan 26 09:04:20][] ===> Start meters
[Jan 26 09:04:20][mtr0] Meter connection established
[Jan 26 09:04:20][mtr0] Meter thread started
[Jan 26 09:04:20][mtr0] Meter is opened. Starting channels.
[Jan 26 09:04:20][chn0] Logging thread started
[Jan 26 09:04:20][chn0] Start logging thread for volkszaehler-api.
Running as daemon: yes
[Jan 26 09:04:20][mtr0] Number of readers: 32
[Jan 26 09:04:20][mtr1] Meter connection established
[Jan 26 09:04:20][mtr0] Config.daemon: 1
[Jan 26 09:04:20][mtr0] Config.local: 0
[Jan 26 09:04:20][mtr1] Meter thread started
[Jan 26 09:04:20][mtr1] Meter is opened. Starting channels.
[Jan 26 09:04:20][chn1] Logging thread started
[Jan 26 09:04:20][] Startup done.
[Jan 26 09:04:20][chn0] Using default volkszaehler api.
[Jan 26 09:04:20][chn1] Start logging thread for volkszaehler-api.
Running as daemon: yes
[Jan 26 09:04:20][chn1] Using default volkszaehler api.
[Jan 26 09:04:20][mtr1] Number of readers: 32
[Jan 26 09:04:20][mtr1] Config.daemon: 1
[Jan 26 09:04:20][mtr1] Config.local: 0
[Jan 26 09:04:21][mtr1] Got 7 new readings from meter:
[Jan 26 09:04:21][mtr1] Reading:
id=1-0:1.8.0*255/ObisItentifier:1-0:1.8.0*255 value=689827.40
ts=1422263061.162
[Jan 26 09:04:21][mtr1] Reading:
id=1-0:1.8.1*255/ObisItentifier:1-0:1.8.1*255 value=689827.40
ts=1422263061.162
[Jan 26 09:04:21][mtr1] Reading:
id=1-0:1.8.2*255/ObisItentifier:1-0:1.8.2*255 value=0.00
ts=1422263061.162
[Jan 26 09:04:21][mtr1] Reading:
id=1-0:16.7.0*255/ObisItentifier:1-0:16.7.0*255 value=2352.00
ts=1422263061.162
[Jan 26 09:04:21][mtr1] Reading:
id=1-0:36.7.0*255/ObisItentifier:1-0:36.7.0*255 value=743.00
ts=1422263061.162
[Jan 26 09:04:21][mtr1] Reading:
id=1-0:56.7.0*255/ObisItentifier:1-0:56.7.0*255 value=738.00
ts=1422263061.162
[Jan 26 09:04:21][mtr1] Reading:
id=1-0:76.7.0*255/ObisItentifier:1-0:76.7.0*255 value=871.00
ts=1422263061.162
[Jan 26 09:04:21][chn1] Adding reading to queue (value=689827.40
ts=1422263061.162)
[Jan 26 09:04:21][chn1] ==> number of tuples: 1
[Jan 26 09:04:21][chn1] compare: 0 1422263061162 1422263061162.205078
[Jan 26 09:04:21][chn1] JSON request body: [ [ 1422263061162.205078,
689827.400000 ] ]
[Jan 26 09:04:21][chn1] Buffer dump (size=0 keep=32): {}
[Jan 26 09:04:21][mtr1] Next reading in 600 seconds
[Jan 26 09:04:21][chn1] CURL: About to connect() to 127.0.0.1 port 80 (#0)
[Jan 26 09:04:21][chn1] CURL: Trying 127.0.0.1...
[Jan 26 09:04:21][chn1] CURL: connected
[Jan 26 09:04:21][chn1] CURL: Connected to 127.0.0.1 (127.0.0.1) port 80 (#0)
[Jan 26 09:04:21][chn1] CURL: Sent 43 bytes..
[Jan 26 09:04:21][chn1] CURL: Sent '[ [ 1422263061162.205078,
689827.400000 ] ]' bytes
[Jan 26 09:04:21][chn1] CURL: upload completely sent off: 43 out of 43 bytes
[Jan 26 09:04:21][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
[Jan 26 09:04:21][mtr0] Got 7 new readings from meter:
[Jan 26 09:04:21][mtr0] Reading:
id=1-0:1.8.0*255/ObisItentifier:1-0:1.8.0*255 value=800396.40
ts=1422263061.707
[Jan 26 09:04:21][mtr0] Reading:
id=1-0:1.8.1*255/ObisItentifier:1-0:1.8.1*255 value=800396.40
ts=1422263061.707
[Jan 26 09:04:21][mtr0] Reading:
id=1-0:1.8.2*255/ObisItentifier:1-0:1.8.2*255 value=0.00
ts=1422263061.707
[Jan 26 09:04:21][mtr0] Reading:
id=1-0:16.7.0*255/ObisItentifier:1-0:16.7.0*255 value=2404.00
ts=1422263061.707
[Jan 26 09:04:21][mtr0] Reading:
id=1-0:36.7.0*255/ObisItentifier:1-0:36.7.0*255 value=177.00
ts=1422263061.707
[Jan 26 09:04:21][mtr0] Reading:
id=1-0:56.7.0*255/ObisItentifier:1-0:56.7.0*255 value=158.00
ts=1422263061.707
[Jan 26 09:04:21][mtr0] Reading:
id=1-0:76.7.0*255/ObisItentifier:1-0:76.7.0*255 value=2068.00
ts=1422263061.707
[Jan 26 09:04:21][chn0] Adding reading to queue (value=800396.40
ts=1422263061.707)
[Jan 26 09:04:21][chn0] ==> number of tuples: 1
[Jan 26 09:04:21][chn0] compare: 0 1422263061707 1422263061707.106201
[Jan 26 09:04:21][chn0] JSON request body: [ [ 1422263061707.106201,
800396.400000 ] ]
[Jan 26 09:04:21][chn0] CURL: About to connect() to 127.0.0.1 port 80 (#0)
[Jan 26 09:04:21][chn0] CURL: Trying 127.0.0.1...
[Jan 26 09:04:21][chn0] CURL: connected
[Jan 26 09:04:21][chn0] CURL: Connected to 127.0.0.1 (127.0.0.1) port 80 (#0)
[Jan 26 09:04:21][chn0] CURL: Sent 43 bytes..
[Jan 26 09:04:21][chn0] CURL: Sent '[ [ 1422263061707.106201,
800396.400000 ] ]' bytes
[Jan 26 09:04:21][chn0] CURL: upload completely sent off: 43 out of 43 bytes
[Jan 26 09:04:21][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
[Jan 26 09:04:21][chn0] Buffer dump (size=0 keep=32): {}
[Jan 26 09:04:21][mtr0] Next reading in 600 seconds
[Jan 26 09:04:22][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
[Jan 26 09:04:22][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
[Jan 26 09:04:23][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
[Jan 26 09:04:23][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
[Jan 26 09:04:24][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
[Jan 26 09:04:24][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
[Jan 26 09:04:25][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
[Jan 26 09:04:25][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
[Jan 26 09:04:26][chn1] CURL: additional stuff not fine transfer.c:1037: 0 0
[Jan 26 09:04:26][chn1] CURL: HTTP 1.1 or later with persistent
connection, pipelining supported
[Jan 26 09:04:26][chn1] CURL: Received 26 bytes
[Jan 26 09:04:26][chn1] CURL: Received '{"version":"0.3","rows":1}' bytes
[Jan 26 09:04:26][chn1] CURL: Connection #0 to host 127.0.0.1 left intact
[Jan 26 09:04:26][chn1] CURL Request succeeded with code: 200
[Jan 26 09:04:26][chn0] CURL: additional stuff not fine transfer.c:1037: 0 0
[Jan 26 09:04:27][chn0] CURL: HTTP 1.1 or later with persistent
connection, pipelining supported
[Jan 26 09:04:27][chn0] CURL: Received 26 bytes
[Jan 26 09:04:27][chn0] CURL: Received '{"version":"0.3","rows":1}' bytes
[Jan 26 09:04:27][chn0] CURL: Connection #0 to host 127.0.0.1 left intact
[Jan 26 09:04:27][chn0] CURL Request succeeded with code: 200
---------------
hast du eine ahnung wie man den CURL: additional stuff not fine fehler
beheben kann ?
mfg
jan
2015-01-26 11:23 GMT+01:00 Matthias Behr <mbehr at mcbehr.de>:
> Ok. In dem Log ist kein Sprung sichtbar.
> [Jan 25 20:54:17][chn0] Adding reading to queue (value=795554.60
> ts=1422219257.039)
> [Jan 25 20:54:18][chn1] Adding reading to queue (value=680592.00
> ts=1422219258.619)
> [Jan 25 21:04:17][chn0] Adding reading to queue (value=795554.90
> ts=1422219857.050)
> [Jan 25 21:04:18][chn1] Adding reading to queue (value=680592.00
> ts=1422219858.639)
> [Jan 25 21:14:17][chn0] Adding reading to queue (value=795555.20
> ts=1422220457.062)
> [Jan 25 21:14:18][chn1] Adding reading to queue (value=680592.00
> ts=1422220458.662)
>
> Kannst du einen Log schicken (oder eine Zeitangabe), wo ein Sprung war?
>
> Am 26.01.2015 um 18:05 schrieb Jan Goe <jan.andrea7 at googlemail.com>:
>
> ja ich habe 2 Meter angeschlossen ( 1x für wohnung 1x für die wäremepumpe )
>
> hier die config:
>
> ---------------
> /**
> * vzlogger configuration
> *
> * use proper encoded JSON with javascript comments
> *
> * take a look at the wiki for detailed information:
> * http://wiki.volkszaehler.org/software/controller/vzlogger#configuration
> */
>
> {
> "retry" : 30, /* how long to sleep between failed
> requests, in seconds */
> "daemon": true, /* run periodically */
> "foreground" : true, /* dont run in background (prevents
> forking) */
>
> "verbosity" : 15, /* between 0 and 15 */
> "log" : "/var/log/vzlogger.log",/* path to logfile, optional */
>
> "local" : {
> "enabled" : false, /* should we start the local HTTPd for
> serving live readings? */
> "port" : 80, /* the TCP port for the local HTTPd */
> "index" : true, /* should we provide a index listing of
> available channels? */
> "timeout" : 30, /* timeout for long polling comet
> requests, 0 disables comet, in seconds */
> "buffer" : 600 /* how long to buffer readings for the
> local interface, in seconds */
> },
>
> "meters" : [{
> "enabled" : true, /* disabled meters will be ignored */
> "protocol" : "sml", /* use 'vzlogger -h' for list of available
> protocols */
> "device" : "/dev/usb-ir-lesekopf0",
> "interval": 600,
> "channels": [{
> "uuid" : "11c04d20-a31e-11e4-8745-d1d65d1da157",
> "middleware" : "
> http://127.0.0.1/volkszaehler.org/htdocs/middleware.php",
> "identifier" : "1-0:1.8.0",
> }]
>
> },{
> "enabled" : true, /* disabled meters will be ignored */
> "protocol" : "sml", /* use 'vzlogger -h' for list of available
> protocols */
> "device" : "/dev/usb-ir-lesekopf1",
> "interval": 600,
> "channels": [{
> "uuid" : "f9d00040-a47e-11e4-8bb8-edea5119d3cf",
> "middleware" : "
> http://127.0.0.1/volkszaehler.org/htdocs/middleware.php",
> "identifier" : "1-0:1.8.0",
> }]
> },
> ]}
>
> ---------------------------
>
> 2015-01-25 23:33 GMT+01:00 Matthias Behr <mbehr at mcbehr.de>:
>
>> Du hast 2 Meter angeschlossen, oder? Kannst du mal die ganze Config
>> schicken?
>>
>> [Jan 25 21:14:17][mtr0] Reading:
>> id=1-0:1.8.0*255/ObisItentifier:1-0:1.8.0*255 value=795555.20
>> ts=1422220457.062
>> [Jan 25 21:14:18][mtr1] Reading:
>> id=1-0:1.8.0*255/ObisItentifier:1-0:1.8.0*255 value=680592.00
>> ts=1422220458.662
>>
>>
>>
>> Am 26.01.2015 um 06:23 schrieb Jan Goe <jan.andrea7 at googlemail.com>:
>>
>> hallo im anhang die vzlogger.log
>>
>> 2015-01-25 22:16 GMT+01:00 Matthias Behr <mbehr at mcbehr.de>:
>>
>>> Kannst du mal ein Log mitschicken?
>>> Die Frage ist, ob das zB durch falsches Parsen oder Bitfehler bei der
>>> Übertragung passiert.
>>>
>>> Gruß
>>> Matthias
>>>
>>> Sent from a mobile device.
>>>
>>> Am 26.01.2015 um 01:34 schrieb Nils Radde <nils.rasmus at googlemail.com>:
>>>
>>>
>>>
>>> Moin zusammen,
>>>
>>>
>>>
>>> ich habe mir den Auslesekopf (USB) von Udo gekauft und möchte damit mein
>>> Easymeter Q3D auslesen.
>>>
>>> Dieses klappt eigentlich ganz gut, nur das ich immer sehr hohe spitzen
>>> drin habe.
>>>
>>> Sowas wie 24 MW.
>>>
>>>
>>>
>>> Wie bekomme ich diese weg. Ich schicke euch meine vzlogger conf mal mit.
>>>
>>>
>>>
>>> /**
>>>
>>> * vzlogger configuration
>>>
>>> *
>>>
>>> * use proper encoded JSON with javascript comments
>>>
>>> *
>>>
>>> * take a look at the wiki for detailed information:
>>>
>>> *
>>> http://wiki.volkszaehler.org/software/controller/vzlogger#configuration
>>>
>>> */
>>>
>>>
>>>
>>> {
>>>
>>> "retry" : 30, /* how long to sleep between failed requests, in seconds */
>>>
>>> "daemon": true, /* run periodically */
>>>
>>> //"foreground" : true, /* dont run in background (prevents forking) */
>>>
>>> "verbosity" : 1, /* between 0 and 15 */
>>>
>>> "log" : "/var/log/vzlogger.log", /* path to logfile, optional */
>>>
>>>
>>>
>>> "local" : {
>>>
>>> "enabled" : false, /* should we start the local HTTPd for serving live
>>> readings? */
>>>
>>> "port" : 80, /* the TCP port for the local HTTPd */
>>>
>>> "index" : true, /* should we provide a index listing of available
>>> channels if no UUID was requested? */
>>>
>>> "timeout" : 30, /* timeout for long polling comet requests, 0 disables
>>> comet, in seconds */
>>>
>>> "buffer" : 600 /* how long to buffer readings for the local interface,
>>> in seconds */
>>>
>>> },
>>>
>>>
>>>
>>> "meters" : [{
>>>
>>> "enabled" : true, /* disabled meters will be ignored */
>>>
>>> "protocol" : "d0", /* see 'vzlogger -h' for list of available
>>> prot$ */
>>>
>>> "device" : "/dev/usb-ir-lesekopf",
>>>
>>> "channels": [{
>>>
>>> "uuid" : "9176b410-a273-11e4-9298-d98f4ffd1494",
>>>
>>> "middleware" : "http://localhost/middleware.php",
>>>
>>> "identifier" : "1-0:1.7.255",
>>>
>>> }, {
>>>
>>> "uuid" : "57829b20-a271-11e4-88bc-c33ce80d3bd2",
>>>
>>> "middleware" : "http://localhost/middleware.php",
>>>
>>> "identifier" : "1-0:1.8.0"
>>>
>>> }]
>>>
>>> }]
>>>
>>> }
>>>
>>>
>>>
>>> Danke
>>>
>>>
>> <vzlogger.log>
>>
>>
>>
>
> Gruß
>
> Matthias Behr
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://demo.volkszaehler.org/pipermail/volkszaehler-users/attachments/20150126/6c018bee/attachment-0001.html>
More information about the volkszaehler-users
mailing list