[vz-users] S0-Zähler ziert sich noch

[Matthias Behr]

Schreib „Impulse“ in der Config mal mit großem I. Ich weiß nicht, die die Suche case-insensitive ist.
>   "uuid": „...ea8df",
>          "identifier": "impulse“,



> Am 10.10.2015 um 18:15 schrieb Erich Hagen <erich.hagen at gmx.com>:
> 
> Hllo Udo,
> 
> danke für die Info.
> 
> Hab den Identifier auf „Impulse“ gesetzt.
> Am Ergebnis ändert sich nichts.
> Es wird nichts angezeigt.
> 
> Gruß, Erich
> 
> PS:
> Gibt es eine Beschreibung der Parameter, die ich zu Rate ziehen könnte?
> Ich möchte deine Unterstützung nicht mit trivialen Dingen überstrapazieren.
> Ich meine so etwas wie ein Wiki, in dem alle Parameter incl. der gegenseitigen Abhängigkeiten beschrieben sind.
> 
> 
> ===========================
> pi at raspberrypi ~ $ sudo vzlogger -c /etc/vzlogger.conf -v 15
> [Oct 10 17:51:07][main] vzlogger v0.4.4 based on heads/master-0-g084fa52872 from Mon, 3 Aug 2015 23:00:48 +0200 started.
> [Oct 10 17:51:07]       Start parsing configuration from /etc/vzlogger.conf
> [Oct 10 17:51:07][mtr0] Creating new meter with protocol random.
> [Oct 10 17:51:07][mtr0] Interval has to be set and positive!
> [Oct 10 17:51:07][mtr0] Meter configured, disabled.
> [Oct 10 17:51:07]       New meter initialized (protocol=random)
> [Oct 10 17:51:07]       Configure channel.
> [Oct 10 17:51:07][chn0] New channel initialized (uuid=...78620a api=volkszaehler id=)
> [Oct 10 17:51:07][mtr1] Creating new meter with protocol s0.
> [Oct 10 17:51:07][s0]   unknown option for mmap (). Falling back to normal gpio.
> [Oct 10 17:51:07][mtr1] Meter configured, enabled.
> [Oct 10 17:51:07]       New meter initialized (protocol=s0)
> [Oct 10 17:51:07]       Configure channel.
> [Oct 10 17:51:07][chn1] New channel initialized (uuid=...3ea8df api=volkszaehler id=impulse)
> [Oct 10 17:51:07]       Have 2 meters.
> [Oct 10 17:51:07][main] log level is 15
> [Oct 10 17:51:07][main] daemon=0, local=0
> [Oct 10 17:51:07]       Process not  daemonized...
> [Oct 10 17:51:07][push] No pushDataServer defined.
> [Oct 10 17:51:07][]     ===> Start meters
> [Oct 10 17:51:07][mtr0] Meter for protocol 'random' is disabled. Skipping.
> [Oct 10 17:51:07][s0]   counter_thread created
> [Oct 10 17:51:07][s0]   Counter thread started with blocking hwif
> [Oct 10 17:51:07][mtr1] Meter connection established
> [Oct 10 17:51:07][mtr1] [Oct 10 17:51:07][S0]   Meter thread startedMeterS0:HWIF_GPIO:first poll returned 1
> [Oct 10 17:51:07][mtr1] Number of readers: 4
> 
> [Oct 10 17:51:07][mtr1] Config.daemon: 0
> [Oct 10 17:51:07][mtr1] Meter is opened. Starting channels.
> [Oct 10 17:51:07][mtr1] Config.local: 0
> [Oct 10 17:51:07][chn1] Logging thread started
> [Oct 10 17:51:07][chn1] Start logging thread for volkszaehler-api. Running as daemon: no
> [Oct 10 17:51:07][]     Startup done.
> [Oct 10 17:51:07][chn1] Using default volkszaehler api.
> [Oct 10 17:51:08][s0]   Reading S0 - returning 2 readings (n=1 n_neg = 0)
> [Oct 10 17:51:08][mtr1] Got 2 new readings from meter:
> [Oct 10 17:51:08][mtr1] Reading: id=Power/StringItentifier: value=2249.69 ts=1444492268257
> [Oct 10 17:51:08][mtr1] Reading: id=Impulse/StringItentifier: value=1.00 ts=1444492268257
> 
> 
> ==============================
> 
> 
> {
>  "retry": 1,
> 
>  "meters": [
>    {
>      "enabled": false,
>      "allowskip": false,
>      "interval": -1,
>      "aggtime": -1,
>      "aggfixedinterval": false,
>      "channels": [
>        {
>          "uuid": „...620a",
>          "identifier": "",
>          "api": "volkszaehler",
>          "middleware": "http://localhost/middleware.php <http://localhost/middleware.php>",
>          "secretKey": "",
>          "type": "device",
>          "scaler": 1,
>          "aggmode": "none",
>          "duplicates": 0
>        }
>      ],
>      "protocol": "random",
>      "min": 0.0,
>      "max": 10.0,
>      "device": "",
>      "gpio": -1,
>      "mmap": "",
>      "gpio_dir": -1,
>      "configureGPIO": false,
>      "resolution": 1000,
>      "send_zero": false,
>      "debounce_delay": 30,
>      "nonblocking_delay": 100000
>    },
> 
>    {
>      "enabled": true,
>      "allowskip": false,
>      "interval": -1,
>      "aggtime": 5,
>      "aggfixedinterval": true,
>      "aggmode": "SUM",
>      "channels": [
>        {
> 
>      "uuid": „...ea8df",
>          "identifier": "impulse",
>          "api": "volkszaehler",
>          "middleware": "http://localhost/middleware.php <http://localhost/middleware.php>",
>          "secretKey": "",
>          "type": "device",
>          "scaler": 1,
>          "aggmode": "none",
>          "duplicates": 0
>        }
>      ],
>      "protocol": "s0",
>      "device": "1.8.1",
>      "gpio": 4,
>      "mmap": "",
>      "gpio_dir": -1,
>      "configureGPIO": true,
>      "identifier":"impulse",
>      "resolution": 1600,
>      "send_zero": false,
>      "debounce_delay": 30,
>      "nonblocking_delay": 100000
>    }
> 
>  ]
> }
> ===========================
> 
>> Am 10.10.2015 um 17:33 schrieb Udo1 <udo1 at gmx.net <mailto:udo1 at gmx.net>>:
>> 
>> Am 10.10.2015 um 16:57 schrieb Erich Hagen:
>>> "identifier": "",
>> Fehlt. Für S0:  'Impulse'.
>> 
>> Gruß
>> Udo
> 

Gruß

Matthias

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://demo.volkszaehler.org/pipermail/volkszaehler-users/attachments/20151010/4286c203/attachment-0001.html>