[vz-users] volkszaehler-users Digest, Vol 65, Issue 14
johannes
johannes.wimmer006 at gmail.com
Tue Dec 6 18:56:26 CET 2016
Hallo Frank,
also die Middleware läuft auf dem selben System wie der vzlogger, ich
habe das VZ-Image verwendet.
allerdings ist die IP des Systems 192.168.0.101 hatte ich bei middleware
übersehen nun aber geändert, den Push service habe ich nun
auskommentiert und trozdem kommt noch nichts an.
gibts da noch einen Tipp?
lg johannes
Am 2016-12-06 um 18:29 schrieb
volkszaehler-users-request at demo.volkszaehler.org:
> Send volkszaehler-users mailing list submissions to
> volkszaehler-users at demo.volkszaehler.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://demo.volkszaehler.org/mailman/listinfo/volkszaehler-users
> or, via email, send a message with subject or body 'help' to
> volkszaehler-users-request at demo.volkszaehler.org
>
> You can reach the person managing the list at
> volkszaehler-users-owner at demo.volkszaehler.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of volkszaehler-users digest..."
>
>
> Today's Topics:
>
> 1. Re: Fwd: keine Werte im Frontend (Andreas Götz)
> 2. Re: Fwd: keine Werte im Frontend (Frank Richter)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 6 Dec 2016 18:27:59 +0100
> From: Andreas Götz <cpuidle at gmail.com>
> To: "volkszaehler.org - users"
> <volkszaehler-users at demo.volkszaehler.org>
> Subject: Re: [vz-users] Fwd: keine Werte im Frontend
> Message-ID: <DB611144-3144-4638-ABF7-A97F0339FA29 at gmail.com>
> Content-Type: text/plain; charset=utf-8
>
> Die Fragen ändern sich auch bei Doppelposting nicht? Hilf uns Dir zu helfen ;)
>
> Viele Grüße,
> Andreas
>
>> Am 06.12.2016 um 18:17 schrieb johannes <johannes.wimmer006 at gmail.com>:
>>
>> Hallo,
>>
>> Hier nun die gleiche Anfrage noch einmal etwas Verändert bitte diesen Thread verwenden. Danke!
>>
>>
>> ich bräuchte bitte kurz Hilfe, lese einen OSM Zähler aus, aber im
>> Volkszähler-Frontend werden keine Werte angezeigt. Den Kanal habe ich im
>> Frontend erstellt.
>>
>>
>> Wenn ich als "push-url" http://192.168.0.101/push/data.json verwende
>> bekomme ich Fehler 404 zurück und mit meiner aktuellen Einstellung 200
>> was ok sein sollte aber trozdem kommen keine Werte im Frontend an.
>>
>>
>> Meine Config ist die aktuelle vzlogger.conf.OSMmeter Datei an mein
>> System angepasst:
>>
>> // General settings
>> "daemon": false, // run periodically
>> "verbosity":15, // log verbosity (0=log_error and
>> log_warning, 5=log_info, 10=log_debug, 15=log_finest)
>> "log": "/var/log/vzlogger.log", // log file, optional
>> "retry": 30, // http retry delay in seconds
>>
>> // Build-in HTTP server
>> "local": {
>> "enabled": true, // enable local HTTPd for serving live readings
>> "port": 8080, // TCP port for local HTTPd
>> "index": true, // provide index listing of available
>> channels if no UUID was requested
>> "timeout": 30, // timeout for long polling comet requests
>> in seconds (0 disables comet)
>> "buffer": -1 // HTTPd buffer configuration for serving
>> readings, default -1
>> // >0: number of seconds of readings to serve
>> // <0: number of tuples to server per
>> channel (e.g. -3 will serve 3 tuples)
>> },
>>
>> // realtime notification settings
>> "push": [
>> {
>> "url": "http://192.168.0.101" // notification destination,
>> e.g. frontend push-server
>> }
>> ],
>>
>> // Meter configuration
>>
>> "meters": [
>> // example for OMS (M-Bus based) meter
>> {
>> "enabled" : true,
>> "skip": false,
>> "interval": -1,
>> "aggtime": -60,
>> "aggfixedinterval": true,
>> "protocol": "oms",
>> "device": "/dev/ttyUSB0",
>> "baudrate": 9600, // optional default 9600
>> "key": "zensiert", // AES key
>> in hex without spaces. Needs to be exactly 32 chars
>> "mbus_debug": false, // optional provide additional
>> debug output from libmbus on the console/stderr/stdout
>>
>> "channel": { // example channel.
>> multiple channels supported as well
>> "api": "volkszaehler",
>> "uuid": "072d3960-b230-11e6-b31e-292a827213ce",
>> "middleware": "http://127.0.0.1/middleware.php",
>> "identifier": "1.7.0" // currently 1.7.0, 1.8.0,
>> 2.7.0, 2.8.0 supported
>> }
>>
>> }
>> ]
>> }
>>
>> und das ist meine Log-datei:
>>
>> [Dec 06 17:45:10][main] vzlogger v0.6.0 based on
>> heads/master-0-g462c3077bd from Sun, 30 Oct 2016 15:07:12 +0100 started.
>> [Dec 06 17:45:10][mtr0] Creating new meter with protocol oms.
>> [Dec 06 17:45:10][oms] Using libmbus version 0.8.0
>> [Dec 06 17:45:10][mtr0] Meter configured, enabled.
>> [Dec 06 17:45:10] New meter initialized (protocol=oms)
>> [Dec 06 17:45:10] Configure channel.
>> [Dec 06 17:45:10][chn0] New channel initialized (uuid=...7213ce
>> api=volkszaehler id=1.7.0)
>> [Dec 06 17:45:10] Have 1 meters.
>> [Dec 06 17:45:10][main] log level is 15
>> [Dec 06 17:45:10][main] daemon=0, local=1
>> [Dec 06 17:45:10] Process not daemonized...
>> [Dec 06 17:45:10] Opened logfile /var/log/vzlogger.log
>> [Dec 06 17:45:10][push] pushdata_thread created.
>> [Dec 06 17:45:10][] ===> Start meters
>> [Dec 06 17:45:10][push] Start push_data_thread
>> [Dec 06 17:45:10][mtr0] Meter connection established
>> [Dec 06 17:45:10][mtr0] Meter thread started
>> [Dec 06 17:45:10][mtr0] Meter is opened. Starting channels.
>> [Dec 06 17:45:10][chn0] Logging thread not started
>> [Dec 06 17:45:10][http] Starting local interface HTTPd on port 8080
>> [Dec 06 17:45:10][] Startup done.
>> [Dec 06 17:45:10][mtr0] Number of readers: 100
>> [Dec 06 17:45:10][mtr0] Config.daemon: 0
>> [Dec 06 17:45:10][mtr0] Config.local: 1
>> [Dec 06 17:45:10][mtr0] Got 0 new readings from meter:
>> [Dec 06 17:45:10][mtr0] Got 0 new readings from meter:
>> [Dec 06 17:45:10][mtr0] Got 0 new readings from meter:
>> [Dec 06 17:45:10][mtr0] Got 0 new readings from meter:
>> [Dec 06 17:45:10][oms] got valid mbus frame with len=95, type=4
>> control=73 controlinfo=5b address=f0
>> [Dec 06 17:45:10][oms] got SND_UD without SND_NKE
>> [Dec 06 17:45:10][oms] got SND_UD packet
>> [Dec 06 17:45:10][oms] control_word = 0x550
>> [Dec 06 17:45:10][oms] AES with dyn. init. vector for 5 16-byte blocks
>> plus 3 unencrypted data bytes
>> [Dec 06 17:45:10][oms] successfully decrypted a frame
>> [Dec 06 17:45:10][oms] got 10 data records: active mbus_debug for
>> detail infos
>> [Dec 06 17:45:10][oms] DIF=06, NDIFE=00, DIFE1=00, VIF=6d, NVIFE=00
>> VIFE1=00 VIFE2=00
>> [Dec 06 17:45:10][oms] time=2016-12-06 17:45:16
>> [Dec 06 17:45:10][oms] DIF=04, NDIFE=00, DIFE1=00, VIF=03, NVIFE=00
>> VIFE1=00 VIFE2=00
>> [Dec 06 17:45:10][oms] Obis 1.8.0 102505.000000 Energy (Wh)
>> [Dec 06 17:45:10][oms] DIF=04, NDIFE=00, DIFE1=00, VIF=83, NVIFE=01
>> VIFE1=3c VIFE2=00
>> [Dec 06 17:45:10][oms] Obis 2.8.0 7956.000000 Energy (Wh)
>> [Dec 06 17:45:10][oms] DIF=84, NDIFE=01, DIFE1=10, VIF=fb, NVIFE=02
>> VIFE1=82 VIFE2=73
>> [Dec 06 17:45:10][oms] DIF=84, NDIFE=01, DIFE1=10, VIF=fb, NVIFE=03
>> VIFE1=82 VIFE2=f3
>> [Dec 06 17:45:10][oms] DIF=04, NDIFE=00, DIFE1=00, VIF=2b, NVIFE=00
>> VIFE1=00 VIFE2=00
>> [Dec 06 17:45:10][oms] Obis 1.7.0 2018.000000 Power (W)
>> [Dec 06 17:45:10][oms] DIF=04, NDIFE=00, DIFE1=00, VIF=ab, NVIFE=01
>> VIFE1=3c VIFE2=00
>> [Dec 06 17:45:10][oms] Obis 2.7.0 0.000000 Power (W)
>> [Dec 06 17:45:10][oms] DIF=04, NDIFE=00, DIFE1=00, VIF=fb, NVIFE=01
>> VIFE1=14 VIFE2=00
>> [Dec 06 17:45:10][oms] DIF=04, NDIFE=00, DIFE1=00, VIF=fb, NVIFE=02
>> VIFE1=94 VIFE2=3c
>> [Dec 06 17:45:10][oms] DIF=04, NDIFE=00, DIFE1=00, VIF=83, NVIFE=02
>> VIFE1=ff VIFE2=04
>> [Dec 06 17:45:10][mtr0] Got 4 new readings from meter:
>> [Dec 06 17:45:11][mtr0] Reading:
>> id=255-255:1.8.0*255/ObisIdentifier:255-255:1.8.0*255 value=102505.00
>> ts=1481042716000
>> [Dec 06 17:45:11][mtr0] Reading:
>> id=255-255:2.8.0*255/ObisIdentifier:255-255:2.8.0*255 value=7956.00
>> ts=1481042716000
>> [Dec 06 17:45:11][mtr0] Reading:
>> id=255-255:1.7.0*255/ObisIdentifier:255-255:1.7.0*255 value=2018.00
>> ts=1481042716000
>> [Dec 06 17:45:11][mtr0] Reading:
>> id=255-255:2.7.0*255/ObisIdentifier:255-255:2.7.0*255 value=0.00
>> ts=1481042716000
>> [Dec 06 17:45:11][chn0] Adding reading to queue (value=2018.00
>> ts=1481042716000)
>> [Dec 06 17:45:11][push] push: { "data": [ { "uuid":
>> "072d3960-b230-11e6-b31e-292a827213ce", "tuples": [ [ 1481042716000,
>> 2018 ] ] } ] }
>> [Dec 06 17:45:11][push] added to uuid 072d3960-b230-11e6-b31e-292a827213ce
>> [Dec 06 17:45:11][push] CURL Request to http://192.168.0.101 succeeded
>> with code: 200
>> [Dec 06 17:45:11][push] send ok to url http://192.168.0.101
>>
>>
>>
>>
>> kann mir da bitte Jemand weiter helfen.
>> lg Johannes
>>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 6 Dec 2016 18:29:42 +0100
> From: Frank Richter <frank.richter83 at gmail.com>
> To: "volkszaehler.org - users"
> <volkszaehler-users at demo.volkszaehler.org>
> Subject: Re: [vz-users] Fwd: keine Werte im Frontend
> Message-ID:
> <CAD+U_OAOy25bv1rf_CUwDdtG7jbDKpnKWg6ABKP+HYQSMnPBfg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hallo Johannes,
>
> wo läuft deine middleware, auf dem gleichen Gerät wie vzlogger (dann wäre
> die http://127.0.0.1 richtig, die in der channel-Definition steht) oder auf
> einem anderen Rechner (vermute ich, da du bei push
> http://192.168.0.101 eingetragen
> hast)?
> push ist nur für Live-Updates, umgeht aber die middleware und somit auch
> die Datenbank. Lass die push Sache erstmal weg (auskommentieren), das ist
> die Kür wenn alles andere läuft...
>
> Grüße
> Frank
>
> 2016-12-06 18:17 GMT+01:00 johannes <johannes.wimmer006 at gmail.com>:
>
>> Hallo,
>>
>> Hier nun die gleiche Anfrage noch einmal etwas Verändert bitte diesen
>> Thread verwenden. Danke!
>>
>>
>>
>> ich bräuchte bitte kurz Hilfe, lese einen OSM Zähler aus, aber im
>> Volkszähler-Frontend werden keine Werte angezeigt. Den Kanal habe ich im
>> Frontend erstellt.
>>
>>
>> Wenn ich als "push-url" http://192.168.0.101/push/data.json verwende
>> bekomme ich Fehler 404 zurück und mit meiner aktuellen Einstellung 200
>> was ok sein sollte aber trozdem kommen keine Werte im Frontend an.
>>
>>
>> Meine Config ist die aktuelle vzlogger.conf.OSMmeter Datei an mein
>> System angepasst:
>>
>> // General settings
>> "daemon": false, // run periodically
>> "verbosity":15, // log verbosity (0=log_error and
>> log_warning, 5=log_info, 10=log_debug, 15=log_finest)
>> "log": "/var/log/vzlogger.log", // log file, optional
>> "retry": 30, // http retry delay in seconds
>>
>> // Build-in HTTP server
>> "local": {
>> "enabled": true, // enable local HTTPd for serving live readings
>> "port": 8080, // TCP port for local HTTPd
>> "index": true, // provide index listing of available
>> channels if no UUID was requested
>> "timeout": 30, // timeout for long polling comet requests
>> in seconds (0 disables comet)
>> "buffer": -1 // HTTPd buffer configuration for serving
>> readings, default -1
>> // >0: number of seconds of readings to serve
>> // <0: number of tuples to server per
>> channel (e.g. -3 will serve 3 tuples)
>> },
>>
>> // realtime notification settings
>> "push": [
>> {
>> "url": "http://192.168.0.101" // notification destination,
>> e.g. frontend push-server
>> }
>> ],
>>
>> // Meter configuration
>>
>> "meters": [
>> // example for OMS (M-Bus based) meter
>> {
>> "enabled" : true,
>> "skip": false,
>> "interval": -1,
>> "aggtime": -60,
>> "aggfixedinterval": true,
>> "protocol": "oms",
>> "device": "/dev/ttyUSB0",
>> "baudrate": 9600, // optional default 9600
>> "key": "zensiert", // AES key
>>
>> in hex without spaces. Needs to be exactly 32 chars
>> "mbus_debug": false, // optional provide additional
>> debug output from libmbus on the console/stderr/stdout
>>
>> "channel": { // example channel.
>> multiple channels supported as well
>> "api": "volkszaehler",
>> "uuid": "072d3960-b230-11e6-b31e-292a827213ce",
>> "middleware": "http://127.0.0.1/middleware.php",
>> "identifier": "1.7.0" // currently 1.7.0, 1.8.0,
>> 2.7.0, 2.8.0 supported
>> }
>>
>> }
>> ]
>> }
>>
>> und das ist meine Log-datei:
>>
>> [Dec 06 17:45:10][main] vzlogger v0.6.0 based on
>> heads/master-0-g462c3077bd from Sun, 30 Oct 2016 15:07:12 +0100 started.
>> [Dec 06 17:45:10][mtr0] Creating new meter with protocol oms.
>> [Dec 06 17:45:10][oms] Using libmbus version 0.8.0
>> [Dec 06 17:45:10][mtr0] Meter configured, enabled.
>> [Dec 06 17:45:10] New meter initialized (protocol=oms)
>> [Dec 06 17:45:10] Configure channel.
>> [Dec 06 17:45:10][chn0] New channel initialized (uuid=...7213ce
>> api=volkszaehler id=1.7.0)
>> [Dec 06 17:45:10] Have 1 meters.
>> [Dec 06 17:45:10][main] log level is 15
>> [Dec 06 17:45:10][main] daemon=0, local=1
>> [Dec 06 17:45:10] Process not daemonized...
>> [Dec 06 17:45:10] Opened logfile /var/log/vzlogger.log
>> [Dec 06 17:45:10][push] pushdata_thread created.
>> [Dec 06 17:45:10][] ===> Start meters
>> [Dec 06 17:45:10][push] Start push_data_thread
>> [Dec 06 17:45:10][mtr0] Meter connection established
>> [Dec 06 17:45:10][mtr0] Meter thread started
>> [Dec 06 17:45:10][mtr0] Meter is opened. Starting channels.
>> [Dec 06 17:45:10][chn0] Logging thread not started
>> [Dec 06 17:45:10][http] Starting local interface HTTPd on port 8080
>> [Dec 06 17:45:10][] Startup done.
>> [Dec 06 17:45:10][mtr0] Number of readers: 100
>> [Dec 06 17:45:10][mtr0] Config.daemon: 0
>> [Dec 06 17:45:10][mtr0] Config.local: 1
>> [Dec 06 17:45:10][mtr0] Got 0 new readings from meter:
>> [Dec 06 17:45:10][mtr0] Got 0 new readings from meter:
>> [Dec 06 17:45:10][mtr0] Got 0 new readings from meter:
>> [Dec 06 17:45:10][mtr0] Got 0 new readings from meter:
>> [Dec 06 17:45:10][oms] got valid mbus frame with len=95, type=4
>> control=73 controlinfo=5b address=f0
>> [Dec 06 17:45:10][oms] got SND_UD without SND_NKE
>> [Dec 06 17:45:10][oms] got SND_UD packet
>> [Dec 06 17:45:10][oms] control_word = 0x550
>> [Dec 06 17:45:10][oms] AES with dyn. init. vector for 5 16-byte blocks
>> plus 3 unencrypted data bytes
>> [Dec 06 17:45:10][oms] successfully decrypted a frame
>> [Dec 06 17:45:10][oms] got 10 data records: active mbus_debug for
>> detail infos
>> [Dec 06 17:45:10][oms] DIF=06, NDIFE=00, DIFE1=00, VIF=6d, NVIFE=00
>> VIFE1=00 VIFE2=00
>> [Dec 06 17:45:10][oms] time=2016-12-06 17:45:16
>> [Dec 06 17:45:10][oms] DIF=04, NDIFE=00, DIFE1=00, VIF=03, NVIFE=00
>> VIFE1=00 VIFE2=00
>> [Dec 06 17:45:10][oms] Obis 1.8.0 102505.000000 Energy (Wh)
>> [Dec 06 17:45:10][oms] DIF=04, NDIFE=00, DIFE1=00, VIF=83, NVIFE=01
>> VIFE1=3c VIFE2=00
>> [Dec 06 17:45:10][oms] Obis 2.8.0 7956.000000 Energy (Wh)
>> [Dec 06 17:45:10][oms] DIF=84, NDIFE=01, DIFE1=10, VIF=fb, NVIFE=02
>> VIFE1=82 VIFE2=73
>> [Dec 06 17:45:10][oms] DIF=84, NDIFE=01, DIFE1=10, VIF=fb, NVIFE=03
>> VIFE1=82 VIFE2=f3
>> [Dec 06 17:45:10][oms] DIF=04, NDIFE=00, DIFE1=00, VIF=2b, NVIFE=00
>> VIFE1=00 VIFE2=00
>> [Dec 06 17:45:10][oms] Obis 1.7.0 2018.000000 Power (W)
>> [Dec 06 17:45:10][oms] DIF=04, NDIFE=00, DIFE1=00, VIF=ab, NVIFE=01
>> VIFE1=3c VIFE2=00
>> [Dec 06 17:45:10][oms] Obis 2.7.0 0.000000 Power (W)
>> [Dec 06 17:45:10][oms] DIF=04, NDIFE=00, DIFE1=00, VIF=fb, NVIFE=01
>> VIFE1=14 VIFE2=00
>> [Dec 06 17:45:10][oms] DIF=04, NDIFE=00, DIFE1=00, VIF=fb, NVIFE=02
>> VIFE1=94 VIFE2=3c
>> [Dec 06 17:45:10][oms] DIF=04, NDIFE=00, DIFE1=00, VIF=83, NVIFE=02
>> VIFE1=ff VIFE2=04
>> [Dec 06 17:45:10][mtr0] Got 4 new readings from meter:
>> [Dec 06 17:45:11][mtr0] Reading:
>> id=255-255:1.8.0*255/ObisIdentifier:255-255:1.8.0*255 value=102505.00
>> ts=1481042716000
>> [Dec 06 17:45:11][mtr0] Reading:
>> id=255-255:2.8.0*255/ObisIdentifier:255-255:2.8.0*255 value=7956.00
>> ts=1481042716000
>> [Dec 06 17:45:11][mtr0] Reading:
>> id=255-255:1.7.0*255/ObisIdentifier:255-255:1.7.0*255 value=2018.00
>> ts=1481042716000
>> [Dec 06 17:45:11][mtr0] Reading:
>> id=255-255:2.7.0*255/ObisIdentifier:255-255:2.7.0*255 value=0.00
>> ts=1481042716000
>> [Dec 06 17:45:11][chn0] Adding reading to queue (value=2018.00
>> ts=1481042716000)
>> [Dec 06 17:45:11][push] push: { "data": [ { "uuid":
>> "072d3960-b230-11e6-b31e-292a827213ce", "tuples": [ [ 1481042716000,
>> 2018 ] ] } ] }
>> [Dec 06 17:45:11][push] added to uuid 072d3960-b230-11e6-b31e-292a827213ce
>> [Dec 06 17:45:11][push] CURL Request to http://192.168.0.101 succeeded
>> with code: 200
>> [Dec 06 17:45:11][push] send ok to url http://192.168.0.101
>>
>>
>>
>>
>> kann mir da bitte Jemand weiter helfen.
>> lg Johannes
>>
>>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://demo.volkszaehler.org/pipermail/volkszaehler-users/attachments/20161206/dae58998/attachment.html>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> volkszaehler-users mailing list
> volkszaehler-users at demo.volkszaehler.org
> https://demo.volkszaehler.org/mailman/listinfo/volkszaehler-users
>
>
> ------------------------------
>
> End of volkszaehler-users Digest, Vol 65, Issue 14
> **************************************************
More information about the volkszaehler-users
mailing list