[vz-users] manuelle wertuebergabe

[Wolfram Daniel]

hey,
auch dir erstmal danke für die Hilfe.
vzlogger läuft jetzt, aber leider immernoch "nothing to plot..."

logfile:
[Dec 09 18:47:37][main] vzlogger v0.6.1 based on 
heads/master-0-gddc24a5d5c from Wed, 5 Apr 2017 05:19:12 +0200 
started.
[Dec 09 18:47:37][mtr0] Creating new meter with protocol d0.
[Dec 09 18:47:37][d0]   pullseq len:5 found
[Dec 09 18:47:37][d0]   ackseq len:6 found ^F050
, 6
[Dec 09 18:47:37][mtr0] Meter configured, enabled.
[Dec 09 18:47:37]       New meter initialized (protocol=d0)
[Dec 09 18:47:37]       Configure channel.
[Dec 09 18:47:37][chn0] New channel initialized (uuid=...736c26 
api=volkszaehler id=1.8.0)
[Dec 09 18:47:37]       Have 1 meters.
[Dec 09 18:47:37][main] log level is 15
[Dec 09 18:47:37][main] daemon=1, local=0
[Dec 09 18:47:37]       Daemonize process...
[Dec 09 18:47:37]       Opened logfile /var/log/vzlogger.log
[Dec 09 18:47:37][push] No pushDataServer defined.
[Dec 09 18:47:37][]     ===> Start meters
[Dec 09 18:47:37][mtr0] Meter connection established
[Dec 09 18:47:37][mtr0] Meter thread started
[Dec 09 18:47:37][mtr0] Meter is opened. Starting channels.
[Dec 09 18:47:37][chn0] Logging thread started
[Dec 09 18:47:37][]     Startup done.
[Dec 09 18:47:37][mtr0] Number of readers: 400
[Dec 09 18:47:37][mtr0] Config.daemon: 1
[Dec 09 18:47:37][mtr0] Config.local: 0
[Dec 09 18:47:37][d0]   sending pullsequenz send (len:5 is:5).
[Dec 09 18:47:37][chn0] Start logging thread for volkszaehler-api. 
Running as daemon: yes
[Dec 09 18:47:37][chn0] Using default volkszaehler api.
[Dec 09 18:47:38][d0]   Pull answer (vendor=ISk, baudrate=5, 
identification=MT174-0001)
[Dec 09 18:47:38][d0]   Sending ack sequence send (len:6 is:6,^F050
).
[Dec 09 18:47:38][d0]   DEBUG OBIS_CODE byte ^F hex= 6
[Dec 09 18:47:38][d0]   DEBUG OBIS_CODE byte 0 hex= 30
[Dec 09 18:47:38][d0]   DEBUG OBIS_CODE byte 5 hex= 35
[Dec 09 18:47:38][d0]   DEBUG OBIS_CODE byte 0 hex= 30
[Dec 09 18:47:38][d0]   DEBUG OBIS_CODE byte ^M hex= D
[Dec 09 18:47:38][d0]   DEBUG OBIS_CODE byte
  hex= A
[Dec 09 18:47:40][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 18:47:40][d0]   DEBUG OBIS_CODE byte ^@ hex= 0



On Sat, 9 Dec 2017 18:40:14 +0100
  Udo1 <udo1 at gmx.net> wrote:
> Moin,
> 
> Am 09.12.2017 um 18:25 schrieb Wolfram Daniel:
>> Active: failed (Result: exit-code)
> 
> vzloger ist abgestürzt. vzlogger.conf fehlerhaft.
> 
> Drauf achten, dass am Ende der Datei kein Leerzeichen/Leerzeile ist.
> Editieren NUR mit nano.
> 
> Gruß
> Udo