[vz-users] manuelle wertuebergabe

[Wolfram Daniel]

update:
gerade nochmal ins log geschaut, ein sehr sehr oft vorkommender 
eintrag ist:

[Dec 09 18:47:40][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
[Dec 09 18:47:40][d0]   Too much data for obis_code (byte=0x0)

vielleicht hilft das weiter...?!


On Sat, 09 Dec 2017 18:51:31 +0100
  "Wolfram Daniel" <d.wolfram at tu-braunschweig.de> wrote:
> hey,
> auch dir erstmal danke für die Hilfe.
> vzlogger läuft jetzt, aber leider immernoch "nothing to plot..."
> 
> logfile:
> [Dec 09 18:47:37][main] vzlogger v0.6.1 based on 
>heads/master-0-gddc24a5d5c from Wed, 5 Apr 2017 05:19:12 +0200 
>started.
> [Dec 09 18:47:37][mtr0] Creating new meter with protocol d0.
> [Dec 09 18:47:37][d0]   pullseq len:5 found
> [Dec 09 18:47:37][d0]   ackseq len:6 found ^F050
> , 6
> [Dec 09 18:47:37][mtr0] Meter configured, enabled.
> [Dec 09 18:47:37]       New meter initialized (protocol=d0)
> [Dec 09 18:47:37]       Configure channel.
> [Dec 09 18:47:37][chn0] New channel initialized (uuid=...736c26 
>api=volkszaehler id=1.8.0)
> [Dec 09 18:47:37]       Have 1 meters.
> [Dec 09 18:47:37][main] log level is 15
> [Dec 09 18:47:37][main] daemon=1, local=0
> [Dec 09 18:47:37]       Daemonize process...
> [Dec 09 18:47:37]       Opened logfile /var/log/vzlogger.log
> [Dec 09 18:47:37][push] No pushDataServer defined.
> [Dec 09 18:47:37][]     ===> Start meters
> [Dec 09 18:47:37][mtr0] Meter connection established
> [Dec 09 18:47:37][mtr0] Meter thread started
> [Dec 09 18:47:37][mtr0] Meter is opened. Starting channels.
> [Dec 09 18:47:37][chn0] Logging thread started
> [Dec 09 18:47:37][]     Startup done.
> [Dec 09 18:47:37][mtr0] Number of readers: 400
> [Dec 09 18:47:37][mtr0] Config.daemon: 1
> [Dec 09 18:47:37][mtr0] Config.local: 0
> [Dec 09 18:47:37][d0]   sending pullsequenz send (len:5 is:5).
> [Dec 09 18:47:37][chn0] Start logging thread for volkszaehler-api. 
>Running as daemon: yes
> [Dec 09 18:47:37][chn0] Using default volkszaehler api.
> [Dec 09 18:47:38][d0]   Pull answer (vendor=ISk, baudrate=5, 
>identification=MT174-0001)
> [Dec 09 18:47:38][d0]   Sending ack sequence send (len:6 is:6,^F050
> ).
> [Dec 09 18:47:38][d0]   DEBUG OBIS_CODE byte ^F hex= 6
> [Dec 09 18:47:38][d0]   DEBUG OBIS_CODE byte 0 hex= 30
> [Dec 09 18:47:38][d0]   DEBUG OBIS_CODE byte 5 hex= 35
> [Dec 09 18:47:38][d0]   DEBUG OBIS_CODE byte 0 hex= 30
> [Dec 09 18:47:38][d0]   DEBUG OBIS_CODE byte ^M hex= D
> [Dec 09 18:47:38][d0]   DEBUG OBIS_CODE byte
>  hex= A
> [Dec 09 18:47:40][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
> [Dec 09 18:47:40][d0]   DEBUG OBIS_CODE byte ^@ hex= 0
> 
> 
> 
> On Sat, 9 Dec 2017 18:40:14 +0100
>  Udo1 <udo1 at gmx.net> wrote:
>> Moin,
>> 
>> Am 09.12.2017 um 18:25 schrieb Wolfram Daniel:
>>> Active: failed (Result: exit-code)
>> 
>> vzloger ist abgestürzt. vzlogger.conf fehlerhaft.
>> 
>> Drauf achten, dass am Ende der Datei kein Leerzeichen/Leerzeile ist.
>> Editieren NUR mit nano.
>> 
>> Gruß
>> Udo
>